From: "Marek Vašut" <marek.vasut@gmail.com>
To: linux-omap-open-source@linux.omap.com
Subject: PalmTT
Date: Tue, 7 Nov 2006 21:58:15 +0100 [thread overview]
Message-ID: <200611072158.15804.marek.vasut@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 804 bytes --]
Hi,
I´ve pulled latest git snapshot and it seems palmtt is there (all four
patches - board, defconfig, lcd, leds), but as Tony wrote I had to fix those
tabs (formating) before it´ll be (maybe ;-)) merged. I havent seen any
mention about merging TT on gitweb so I was just curious why is it there :)
Well ... doesnt matter ... here´s a patch that fixes formating in
board-palmtt.c and lcd-palmtt.c (formating - tabs and removing commented
code). I´ve also made a small change to board-palmz71.c formating.
Plus I changed GPIO 6 name in board-palmz71(tt).h (renamed
PALMxxx_PINTDAV_GPIO to PALMxxx_PENIRQ_GPIO, where xxx=TT or Z71). Hope it
doesnt matter I put it into one patch while it´s a small (one line - see the
bottom of the patch) change.
Patch is enclosed.
BR
Marek
[-- Attachment #2: palmtt_palmz71_formating_fixes.patch --]
[-- Type: text/x-diff, Size: 17147 bytes --]
diff -Naur linux-omap-current/arch/arm/mach-omap1/board-palmtt.c linux-omap/arch/arm/mach-omap1/board-palmtt.c
--- linux-omap-current/arch/arm/mach-omap1/board-palmtt.c 2006-11-03 19:30:45.000000000 +0100
+++ linux-omap/arch/arm/mach-omap1/board-palmtt.c 2006-11-03 20:40:38.000000000 +0100
@@ -63,40 +63,40 @@
static struct mtd_partition palmtt_partitions[] = {
{
- .name = "write8k",
- .offset = 0,
- .size = SZ_8K,
- .mask_flags = 0,
+ .name = "write8k",
+ .offset = 0,
+ .size = SZ_8K,
+ .mask_flags = 0,
},
{
- .name = "PalmOS-BootLoader(ro)",
- .offset = SZ_8K,
- .size = 7*SZ_8K,
- .mask_flags = MTD_WRITEABLE,
+ .name = "PalmOS-BootLoader(ro)",
+ .offset = SZ_8K,
+ .size = 7*SZ_8K,
+ .mask_flags = MTD_WRITEABLE,
},
{
- .name = "u-boot",
- .offset = MTDPART_OFS_APPEND,
- .size = 8*SZ_8K,
- .mask_flags = 0,
+ .name = "u-boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8*SZ_8K,
+ .mask_flags = 0,
},
{
- .name = "PalmOS-FS(ro)",
- .offset = MTDPART_OFS_APPEND,
- .size = 7*SZ_1M + 4*SZ_64K - 16*SZ_8K,
- .mask_flags = MTD_WRITEABLE,
+ .name = "PalmOS-FS(ro)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 7*SZ_1M + 4*SZ_64K - 16*SZ_8K,
+ .mask_flags = MTD_WRITEABLE,
},
{
- .name = "u-boot(rez)",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- .mask_flags = 0
+ .name = "u-boot(rez)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0
},
{
- .name = "empty",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0
+ .name = "empty",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
}
};
@@ -126,18 +126,20 @@
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
+ .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+ .spcr1 = RINTM(3) | RRST,
+ .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+ RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+ .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) |
+ RWDLEN1(OMAP_MCBSP_WORD_16),
+ .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+ XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+ .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) |
+ XWDLEN1(OMAP_MCBSP_WORD_16),
+ .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
+ .srgr2 = GSYNC | CLKSP | FSGM |
+ FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+ .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
@@ -153,8 +155,8 @@
static struct platform_device palmtt_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
+ .id = 1,
+ .dev = {
.platform_data = &alsa_config,
},
};
@@ -188,69 +190,69 @@
.id = -1,
};
static struct omap_irda_config palmtt_irda_config = {
- .transceiver_cap = IR_SIRMODE,
- .rx_channel = OMAP_DMA_UART3_RX,
- .tx_channel = OMAP_DMA_UART3_TX,
- .dest_start = UART3_THR,
- .src_start = UART3_RHR,
- .tx_trigger = 0,
- .rx_trigger = 0,
+ .transceiver_cap = IR_SIRMODE,
+ .rx_channel = OMAP_DMA_UART3_RX,
+ .tx_channel = OMAP_DMA_UART3_TX,
+ .dest_start = UART3_THR,
+ .src_start = UART3_RHR,
+ .tx_trigger = 0,
+ .rx_trigger = 0,
};
static struct resource palmtt_irda_resources[] = {
- [0] = {
- .start = INT_UART3,
- .end = INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
+ [0] = {
+ .start = INT_UART3,
+ .end = INT_UART3,
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct platform_device palmtt_irda_device = {
- .name = "omapirda",
- .id = -1,
- .dev = {
- .platform_data = &palmtt_irda_config,
- },
- .num_resources = ARRAY_SIZE(palmtt_irda_resources),
- .resource = palmtt_irda_resources,
+ .name = "omapirda",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtt_irda_config,
+ },
+ .num_resources = ARRAY_SIZE(palmtt_irda_resources),
+ .resource = palmtt_irda_resources,
};
static struct platform_device palmtt_spi_device = {
- .name = "spi_palmtt",
- .id = -1,
+ .name = "spi_palmtt",
+ .id = -1,
};
static struct omap_backlight_config palmtt_backlight_config = {
- .default_intensity = 0xa0,
+ .default_intensity = 0xa0,
};
static struct platform_device palmtt_backlight_device = {
- .name = "omap-bl",
- .id = -1,
- .dev = {
- .platform_data = &palmtt_backlight_config,
- },
+ .name = "omap-bl",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtt_backlight_config,
+ },
};
static struct omap_led_config palmtt_led_config[] = {
- {
- .cdev = {
- .name = "palmtt:led0",
+ {
+ .cdev = {
+ .name = "palmtt:led0",
},
- .gpio = PALMTT_LED_GPIO,
+ .gpio = PALMTT_LED_GPIO,
},
};
static struct omap_led_platform_data palmtt_led_data = {
- .nr_leds = ARRAY_SIZE(palmtt_led_config),
- .leds = palmtt_led_config,
+ .nr_leds = ARRAY_SIZE(palmtt_led_config),
+ .leds = palmtt_led_config,
};
static struct platform_device palmtt_led_device = {
- .name = "omap-led",
- .id = -1,
- .dev = {
- .platform_data = &palmtt_led_data,
+ .name = "omap-led",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtt_led_data,
},
};
@@ -262,34 +264,34 @@
&palmtt_irda_device,
&palmtt_spi_device,
&palmtt_backlight_device,
- &palmtt_led_device,
+ &palmtt_led_device,
};
static int palmtt_get_pendown_state(void)
{
- return !omap_get_gpio_datain(6);
+ return !omap_get_gpio_datain(PALMTT_PENIRQ_GPIO);
}
static const struct ads7846_platform_data palmtt_ts_info = {
- .model = 7846,
- .vref_delay_usecs = 100, /* internal, no capacitor */
- .x_plate_ohms = 419,
- .y_plate_ohms = 486,
- .get_pendown_state = palmtt_get_pendown_state,
-};
-
-static struct spi_board_info __initdata palmtt_boardinfo[] = { {
- /* MicroWire (bus 2) CS0 has an ads7846e */
- .modalias = "ads7846",
- .platform_data = &palmtt_ts_info,
- .irq = OMAP_GPIO_IRQ(6),
- .max_speed_hz = 120000 /* max sample rate at 3V */
- * 26 /* command + data + overhead */,
- .bus_num = 2,
- .chip_select = 0,
-} };
-
-//static int __initdata palmtt_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+ .model = 7846,
+ .vref_delay_usecs = 100, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .get_pendown_state = palmtt_get_pendown_state,
+};
+
+static struct spi_board_info __initdata palmtt_boardinfo[] = {
+ {
+ /* MicroWire (bus 2) CS0 has an ads7846e */
+ .modalias = "ads7846",
+ .platform_data = &palmtt_ts_info,
+ .irq = OMAP_GPIO_IRQ(PALMTT_PENIRQ_GPIO),
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
+ .bus_num = 2,
+ .chip_select = 0,
+ }
+};
static void __init omap_palmtt_init_irq(void)
{
@@ -308,7 +310,7 @@
};
static struct omap_uart_config palmtt_uart_config __initdata = {
- .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
+ .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
};
static struct omap_board_config_kernel palmtt_config[] = {
@@ -316,19 +318,6 @@
{ OMAP_TAG_LCD, &palmtt_lcd_config },
{ OMAP_TAG_UART, &palmtt_uart_config },
};
-/*should be fixed soon*/
-/*static irqreturn_t
-palmtt_powercable(int irq, void *dev_id, struct pt_regs *regs)
-{
- if (omap_get_gpio_datain(PALMTT_USBDETECT_GPIO)) {
- printk(KERN_INFO "PM: USB cable connected (charging)\n");
- set_irq_type(OMAP_GPIO_IRQ(PALMTT_USBDETECT_GPIO), IRQT_FALLING);
- } else {
- printk(KERN_INFO "PM: USB cable disconnected\n");
- set_irq_type(OMAP_GPIO_IRQ(PALMTT_USBDETECT_GPIO), IRQT_RISING);
- }
- return IRQ_HANDLED;
-}*/
static void __init omap_mpu_wdt_mode(int mode) {
if (mode)
@@ -338,28 +327,9 @@
omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
}
}
-/*needs to be fixed, this will be simple*/
-/*static void __init palmtt_gpio_setup(int early)
-{
- if (early) {
- omap_set_gpio_dataout(1,1);
- omap_set_gpio_direction(1,0);
- } else {
- if (omap_request_gpio(PALMTT_USBDETECT_GPIO)) {
- printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
- return;
- }
- omap_set_gpio_direction(PALMTT_USBDETECT_GPIO, 1);
- if (request_irq(OMAP_GPIO_IRQ(PALMTT_USBDETECT_GPIO), palmtt_powercable,
- SA_SAMPLE_RANDOM, "palmtt-cable", 0))
- printk(KERN_ERR "IRQ request for power cable failed!\n");
- palmtt_powercable(OMAP_GPIO_IRQ(PALMTT_USBDETECT_GPIO), 0, 0);
- }
-}*/
static void __init omap_palmtt_init(void)
{
-// palmtt_gpio_setup(1);
omap_mpu_wdt_mode(0);
omap_board_config = palmtt_config;
@@ -369,7 +339,6 @@
spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
omap_serial_init();
-// palmtt_gpio_setup(0);
}
static void __init omap_palmtt_map_io(void)
@@ -377,7 +346,7 @@
omap1_map_common_io();
}
-MACHINE_START(OMAP_PALMTT, "PalmTT")
+MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
.phys_io = 0xfff00000,
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
diff -Naur linux-omap-current/arch/arm/mach-omap1/board-palmz71.c linux-omap/arch/arm/mach-omap1/board-palmz71.c
--- linux-omap-current/arch/arm/mach-omap1/board-palmz71.c 2006-11-03 19:30:45.000000000 +0100
+++ linux-omap/arch/arm/mach-omap1/board-palmz71.c 2006-11-03 20:40:20.000000000 +0100
@@ -182,18 +182,17 @@
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP, *//* mcbsp: master */
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
+ .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+ .spcr1 = RINTM(3) | RRST,
+ .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+ RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+ .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+ .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+ XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+ .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+ .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
+ .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+ .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
@@ -240,7 +239,7 @@
static int
palmz71_get_pendown_state(void)
{
- return !omap_get_gpio_datain(6);
+ return !omap_get_gpio_datain(PALMZ71_PENIRQ_GPIO);
}
static const struct ads7846_platform_data palmz71_ts_info = {
@@ -252,16 +251,17 @@
};
static struct spi_board_info __initdata palmz71_boardinfo[] = {
-{
+ {
/* MicroWire (bus 2) CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &palmz71_ts_info,
- .irq = OMAP_GPIO_IRQ(6),
- .max_speed_hz = 120000 /* max sample rate at 3V */
- * 26 /* command + data + overhead */,
+ .irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO),
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
.bus_num = 2,
.chip_select = 0,
-} };
+ }
+};
static struct omap_usb_config palmz71_usb_config __initdata = {
.register_dev = 1, /* Mini-B only receptacle */
@@ -288,10 +288,10 @@
};
static struct omap_board_config_kernel palmz71_config[] = {
- {OMAP_TAG_USB, &palmz71_usb_config},
- {OMAP_TAG_MMC, &palmz71_mmc_config},
- {OMAP_TAG_LCD, &palmz71_lcd_config},
- {OMAP_TAG_UART, &palmz71_uart_config},
+ {OMAP_TAG_USB, &palmz71_usb_config},
+ {OMAP_TAG_MMC, &palmz71_mmc_config},
+ {OMAP_TAG_LCD, &palmz71_lcd_config},
+ {OMAP_TAG_UART, &palmz71_uart_config},
};
static irqreturn_t
@@ -343,10 +343,9 @@
}
omap_set_gpio_direction(PALMZ71_USBDETECT_GPIO, 1);
if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
- palmz71_powercable, SA_SAMPLE_RANDOM,
- "palmz71-cable", 0))
- printk(KERN_ERR
- "IRQ request for power cable failed!\n");
+ palmz71_powercable, SA_SAMPLE_RANDOM, "palmz71-cable", 0))
+ printk(KERN_ERR
+ "IRQ request for power cable failed!\n");
palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0, 0);
}
}
diff -Naur linux-omap-current/drivers/video/omap/lcd_palmtt.c linux-omap/drivers/video/omap/lcd_palmtt.c
--- linux-omap-current/drivers/video/omap/lcd_palmtt.c 2006-11-03 19:31:00.000000000 +0100
+++ linux-omap/drivers/video/omap/lcd_palmtt.c 2006-11-03 20:47:44.000000000 +0100
@@ -60,26 +60,28 @@
}
struct lcd_panel palmtt_panel = {
- .name = "palmtt",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | OMAP_LCDC_INV_HSYNC | OMAP_LCDC_HSVS_RISING_EDGE | OMAP_LCDC_HSVS_OPPOSITE,
- .bpp = 16,
- .data_lines = 16,
- .x_res = 320,
- .y_res = 320,
- .pixel_clock = 10000,
- .hsw = 4,
- .hfp = 8,
- .hbp = 28,
- .vsw = 1,
- .vfp = 8,
- .vbp = 7,
- .pcd = 0,
-
- .init = palmtt_panel_init,
- .cleanup = palmtt_panel_cleanup,
- .enable = palmtt_panel_enable,
- .disable = palmtt_panel_disable,
- .get_caps= palmtt_panel_get_caps,
+ .name = "palmtt",
+ .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
+ OMAP_LCDC_INV_HSYNC | OMAP_LCDC_HSVS_RISING_EDGE |
+ OMAP_LCDC_HSVS_OPPOSITE,
+ .bpp = 16,
+ .data_lines = 16,
+ .x_res = 320,
+ .y_res = 320,
+ .pixel_clock = 10000,
+ .hsw = 4,
+ .hfp = 8,
+ .hbp = 28,
+ .vsw = 1,
+ .vfp = 8,
+ .vbp = 7,
+ .pcd = 0,
+
+ .init = palmtt_panel_init,
+ .cleanup = palmtt_panel_cleanup,
+ .enable = palmtt_panel_enable,
+ .disable = palmtt_panel_disable,
+ .get_caps = palmtt_panel_get_caps,
};
static int palmtt_panel_probe(struct platform_device *pdev)
@@ -126,4 +128,3 @@
module_init(palmtt_panel_drv_init);
module_exit(palmtt_panel_drv_cleanup);
-
diff -Naur linux-omap-current/drivers/video/omap/lcd_palmz71.c linux-omap/drivers/video/omap/lcd_palmz71.c
--- linux-omap-current/drivers/video/omap/lcd_palmz71.c 2006-11-03 19:31:00.000000000 +0100
+++ linux-omap/drivers/video/omap/lcd_palmz71.c 2006-11-03 20:47:52.000000000 +0100
@@ -30,8 +30,6 @@
#include <asm/arch/gpio.h>
#include <asm/arch/omapfb.h>
-/* #define OMAPFB_DBG 1 */
-
static int palmz71_panel_init(struct omapfb_device *panel)
{
return 0;
diff -Naur linux-omap-current/include/asm-arm/arch-omap/board-palmtt.h linux-omap/include/asm-arm/arch-omap/board-palmtt.h
--- linux-omap-current/include/asm-arm/arch-omap/board-palmtt.h 2006-11-03 19:31:16.000000000 +0100
+++ linux-omap/include/asm-arm/arch-omap/board-palmtt.h 2006-11-03 20:24:51.000000000 +0100
@@ -16,8 +16,8 @@
#define PALMTT_USBDETECT_GPIO 0
#define PALMTT_CABLE_GPIO 1
#define PALMTT_LED_GPIO 3
-#define PALMTT_PINTDAV_GPIO 6
+#define PALMTT_PENIRQ_GPIO 6
#define PALMTT_MMC_WP_GPIO 8
-#define PALMTT_HDQ_GPIO 11
+#define PALMTT_HDQ_GPIO 11
#endif /* __OMAP_BOARD_PALMTT_H */
diff -Naur linux-omap-current/include/asm-arm/arch-omap/board-palmz71.h linux-omap/include/asm-arm/arch-omap/board-palmz71.h
--- linux-omap-current/include/asm-arm/arch-omap/board-palmz71.h 2006-11-03 19:31:16.000000000 +0100
+++ linux-omap/include/asm-arm/arch-omap/board-palmz71.h 2006-11-03 20:34:43.000000000 +0100
@@ -14,7 +14,7 @@
#define __OMAP_BOARD_PALMZ71_H
#define PALMZ71_USBDETECT_GPIO 0
-#define PALMZ71_PINTDAV_GPIO 6
+#define PALMZ71_PENIRQ_GPIO 6
#define PALMZ71_MMC_WP_GPIO 8
#define PALMZ71_HDQ_GPIO 11
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
next reply other threads:[~2006-11-07 20:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-07 20:58 Marek Vašut [this message]
2006-11-10 0:16 ` PalmTT Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200611072158.15804.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.