Re: New laptop - problems with linux

[Stephen Hemminger <shemminger@osdl.org>]

On Wed, 08 Nov 2006 14:39:53 -0500
Stephen Clark <Stephen.Clark@seclark.us> wrote:

> Francois Romieu wrote:
> 
> >Stephen Clark <Stephen.Clark@seclark.us> :
> >[...]
> >  
> >
> >>No it is not loaded - i did a modprobe on it and it loaded but still no 
> >>ethx device.
> >>    
> >>
> >
> >Send complete 'dmesg' and 'lspci -vvx' (please Cc: netdev@vger.kernel.org)
> >
> >  
> >
> lspci and dmesg attached below:
> Thanks, anything else I can do please let me know.

> 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG 
> Network Connection (rev 02)
>         Subsystem: Intel Corporation Unknown device 1000
> 

Use the ipw3945 driver and binary regulatory daemon from:
	http://ipw3945.sourceforge.net/#downloads

 
> 05:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169SC 
> Gigabit Ethernet (rev 10)
>         Subsystem: ASUSTeK Computer Inc. Unknown device 1345
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
> ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
>         Interrupt: pin A routed to IRQ 11
>         Region 0: I/O ports at d800 [size=256]
>         Region 1: Memory at fe8ffc00 (32-bit, non-prefetchable) [size=256]
>         Expansion ROM at 80000000 [disabled] [size=128K]
>         Capabilities: [dc] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
> PME(D0-,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 00: ec 10 67 81 17 00 b0 02 10 00 00 02 08 40 00 00
> 10: 01 d8 00 00 00 fc 8f fe 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 45 13
> 30: 00 00 8c fe dc 00 00 00 00 00 00 00 0b 01 20 40
> 

This PCI ID was added to 2.6.19.  You should run 2.6.19-rc5 or backport the changes.