From: Andre Noll <maan@systemlinux.org>
To: ak@suse.de, discuss@x86-64.org, linux-kernel@vger.kernel.org
Subject: 2.6.19-rc5: Bad page state in process 'swapper'
Date: Fri, 10 Nov 2006 13:11:51 +0100 [thread overview]
Message-ID: <20061110121151.GC29040@skl-net.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 31520 bytes --]
Hi
just tried to boot 2.6.19-rc5 on a 2-way opteron 250 with 8G Ram:
Any hints?
Andre
eded
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2660 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2698 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb26d0 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2708 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2740 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2778 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb27b0 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb27e8 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2820 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2858 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2890 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb28c8 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2900 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2938 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2970 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb29a8 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb29e0 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2a18 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2a50 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2a88 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2ac0 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2af8 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2b30 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2b68 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2ba0 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2bd8 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2c10 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Bad page state in process 'swapper'
page:ffff810003fb2c48 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff8014f158>] bad_page+0x58/0x82
[<ffffffff8014fb87>] free_hot_cold_page+0x73/0x10f
[<ffffffff805cd876>] free_all_bootmem_core+0x101/0x1c2
[<ffffffff805cad64>] numa_free_all_bootmem+0x39/0x78
[<ffffffff805ca63c>] mem_init+0x59/0x16c
[<ffffffff805bb75c>] start_kernel+0x165/0x1e7
[<ffffffff805bb195>] x86_64_start_kernel+0x12b/0x130
Memory: 8122880k/8388608k available (3184k kernel code, 199740k reserved, 1490k data, 2612k init)
Calibrating delay using timer specific routine.. 4784.56 BogoMIPS (lpj=9569128)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12447835
Detected 12.447 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4780.20 BogoMIPS (lpj=9560414)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 1
AMD Opteron(tm) Processor 250 stepping 0a
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff -8 cycles, maxerr 1201 cycles)
Brought up 2 CPUs
testing NMI watchdog ... OK.
Disabling vsyscall due to use of PM timer
time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
time.c: Detected 2389.977 MHz processor.
migration_cost=550
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:03:06.0
PCI: Firmware left 0000:03:08.0 e100 interrupts enabled, disabling
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
AMD768 RNG detected
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 8000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
PCI: Bridge: 0000:00:06.0
IO window: a000-bfff
MEM window: fc900000-feafffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
IO window: 9000-9fff
MEM window: fc600000-fc8fffff
PREFETCH window: ff500000-ff5fffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
microcode: CPU0 not a capable Intel processor
microcode: CPU1 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Getting cpuindex for acpiid 0x3
ACPI: Getting cpuindex for acpiid 0x4
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
ipmi message handler version 39.0
ipmi device interface
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
IPMI Watchdog: driver initialized
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
Copyright (c) 1999-2006 Intel Corporation.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 18 (level, low) -> IRQ 18
eth0: 0000:03:08.0, 00:E0:81:2E:78:F7, IRQ 18.
Board assembly 567812-052, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xd0a6c714).
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tg3.c:v3.68 (November 02, 2006)
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 24
eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2e:79:26
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 25 (level, low) -> IRQ 25
eth2: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2e:79:27
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth2: dma_rwctrl[769f4000] dma_mask[64-bit]
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD8111: IDE controller at PCI slot 0000:00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide0...
Probing IDE interface ide1...
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 24 (level, low) -> IRQ 24
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
scsi 0:0:0:0: Direct-Access FUJITSU MAT3073NP 0105 PQ: 0 ANSI: 3
target0:0:0: asynchronous
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
target0:0:0: Beginning Domain Validation
target0:0:0: wide asynchronous
target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 127)
target0:0:0: Ending Domain Validation
scsi 0:0:1:0: Direct-Access FUJITSU MAT3073NP 0105 PQ: 0 ANSI: 3
target0:0:1: asynchronous
scsi0:A:1:0: Tagged Queuing enabled. Depth 32
target0:0:1: Beginning Domain Validation
target0:0:1: wide asynchronous
target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 127)
target0:0:1: Ending Domain Validation
ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 25 (level, low) -> IRQ 25
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
SCSI device sda: 143638992 512-byte hdwr sectors (73543 MB)
sda: Write Protect is off
sda: Mode Sense: b3 00 00 08
SCSI device sda: drive cache: write back
SCSI device sda: 143638992 512-byte hdwr sectors (73543 MB)
sda: Write Protect is off
sda: Mode Sense: b3 00 00 08
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 143638992 512-byte hdwr sectors (73543 MB)
sdb: Write Protect is off
sdb: Mode Sense: b3 00 00 08
SCSI device sdb: drive cache: write back
SCSI device sdb: 143638992 512-byte hdwr sectors (73543 MB)
sdb: Write Protect is off
sdb: Mode Sense: b3 00 00 08
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
sd 0:0:1:0: Attached scsi disk sdb
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
Fusion MPT base driver 3.04.02
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.02
usbmon: debugfs is not available
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:03:00.0[D] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:03:00.0: irq 19, io mem 0xfeafc000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:03:00.1[D] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:03:00.1: irq 19, io mem 0xfeafd000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
/.amd_mnt/huangho/export/kwaid0/home/maan/scm/torvalds/linux-2.6/drivers/usb/input/hid-core.c: v2.6:USB HID core driver
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
md: raid0 personality registered for level 0
md: multipath personality registered for level -4
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
CCID: Registered CCID 3 (ccid3)
CCID: Registered CCID 2 (ccid2)
SCTP: Hash tables configured (established 65536 bind 65536)
powernow-k8: Found 2 AMD Opteron(tm) Processor 250 processors (version 2.00.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
PM: Writing back config space on device 0000:02:09.0 at offset b (was 164814e4, writing 164414e4)
PM: Writing back config space on device 0000:02:09.0 at offset 3 (was 804000, writing 804010)
PM: Writing back config space on device 0000:02:09.0 at offset 2 (was 2000000, writing 2000003)
PM: Writing back config space on device 0000:02:09.0 at offset 1 (was 2b00000, writing 2b00146)
PM: Writing back config space on device 0000:02:09.1 at offset b (was 164814e4, writing 164414e4)
PM: Writing back config space on device 0000:02:09.1 at offset 3 (was 804000, writing 804010)
PM: Writing back config space on device 0000:02:09.1 at offset 2 (was 2000000, writing 2000003)
PM: Writing back config space on device 0000:02:09.1 at offset 1 (was 2b00000, writing 2b00106)
Sending DHCP requests .<6>tg3: eth1: Link is up at 1000 Mbps, full duplex.
tg3: eth1: Flow control is on for TX and on for RX.
., OK
IP-Config: Got DHCP answer from 192.168.1.254, my address is 192.168.1.120
PM: Writing back config space on device 0000:02:09.1 at offset b (was 164814e4, writing 164414e4)
PM: Writing back config space on device 0000:02:09.1 at offset 3 (was 804000, writing 804010)
PM: Writing back config space on device 0000:02:09.1 at offset 2 (was 2000000, writing 2000003)
PM: Writing back config space on device 0000:02:09.1 at offset 1 (was 2b00000, writing 2b00106)
IP-Config: Complete:
device=eth1, addr=192.168.1.120, mask=255.255.0.0, gw=192.168.1.254,
host=node120, domain=, nis-domain=(none),
bootserver=192.168.1.254, rootserver=192.168.1.254, rootpath=
Freeing unused kernel memory: 2612k freed
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
md: md0 stopped.
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
md: bind<sda2>
md: bind<sdb2>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb2
raid0: comparing sdb2(55038592) with sdb2(55038592)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda2
raid0: comparing sda2(55038592) with sdb2(55038592)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 110077184 blocks.
raid0 : conf->hash_spacing is 110077184 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
md: md0 stopped.
md: unbind<sdb2>
md: export_rdev(sdb2)
md: unbind<sda2>
md: export_rdev(sda2)
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
md: bind<sda2>
md: bind<sdb2>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb2
raid0: comparing sdb2(55038592) with sdb2(55038592)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda2
raid0: comparing sda2(55038592) with sdb2(55038592)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 110077184 blocks.
raid0 : conf->hash_spacing is 110077184 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
Adding 16779852k swap on /dev/sda1. Priority:42 extents:1 across:16779852k
Adding 16779852k swap on /dev/sdb1. Priority:42 extents:1 across:16779852k
warning: process `sensors' used the removed sysctl system call with 7.2.1.
warning: process `sensors' used the removed sysctl system call with 7.2.1.
process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
--
The only person who always got his work done by Friday was Robinson Crusoe
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next reply other threads:[~2006-11-10 12:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-10 12:11 Andre Noll [this message]
2006-11-10 12:24 ` 2.6.19-rc5: Bad page state in process 'swapper' Arjan van de Ven
2006-11-10 13:24 ` Andre Noll
2006-11-10 12:40 ` Andi Kleen
2006-11-10 13:36 ` Andre Noll
2006-11-10 16:10 ` Andre Noll
2006-11-10 16:35 ` [discuss] " Andi Kleen
2006-11-10 17:26 ` Andre Noll
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061110121151.GC29040@skl-net.de \
--to=maan@systemlinux.org \
--cc=ak@suse.de \
--cc=discuss@x86-64.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.