From: Fabio Coatti <cova@ferrara.linux.it>
To: Tejun Heo <htejun@gmail.com>
Cc: Andrew Morton <akpm@osdl.org>,
linux-kernel@vger.kernel.org, Alan Cox <alan@lxorguk.ukuu.org.uk>,
Jeff Garzik <jeff@garzik.org>
Subject: Re: SATA ICH5 not detected at boot, mm-kernels
Date: Sun, 12 Nov 2006 12:09:28 +0100 [thread overview]
Message-ID: <200611121209.31502.cova@ferrara.linux.it> (raw)
In-Reply-To: <454F2E0F.3010804@gmail.com>
It seems that my message hasn't yet shown up on lkml, so I suppose to have
some mail problem :(
To see if this helps, I've removed attachments, replacing it with urls.
Alle 13:43, lunedì 6 novembre 2006, Tejun Heo ha scritto:
> Hello,
>
> Andrew Morton wrote:
> > On Sun, 5 Nov 2006 15:36:33 +0100
> >
> > Fabio Coatti <cova@ferrara.linux.it> wrote:
> >> Hi all; It seems that problems like this has been already reported, but
> >> not exactly the same, so maybe thsi can add some infos. Otherwise, sorry
> >> for the noise.
> >>
> >> Starting from 2.6.19-rc1-mm1 and up to rc4-mm2, at boot the kernel is
> >> unable to detect two sata disks, connected to a ICH5 controller. Latest
> >> mm working kernel seems to be 2.6.18-mm3; 2.6.19-rc4 works just fine.
> >>
I've collected more data; Here you can find .config for all three cases:
2.6.18-mm3 (working) http://members.ferrara.linux.it/cova/config-2.6.18-mm3
2.6.19-rc5 (working) http://members.ferrara.linux.it/cova/config-2.6.19-rc5
2.6.19-rc5-mm1 (not working)
http://members.ferrara.linux.it/cova/config-2.6.19-rc5-mm1
and dmesg for 2.6.18-mm3 and 2.6.19-rc5. I've seen that I've saved the dmesg
with nvidia driver inserted; I can't, right now, recreate the files without
nvidia driver loaded, but as the issue happens before the driver is loaded
maybe the information can be useful anyway. I'll made a non tainted dmesg as
soon as possible, if needed.
http://members.ferrara.linux.it/cova/dmesg-2.6.18-mm3
http://members.ferrara.linux.it/cova/dmesg-2.6.19-rc5
I'm trying to get the dmesg for 2.6.19-rc-mm1 (the non-working one), but I've
to find a serial cable :)
Anyway, I've seen this message on dmesg, that seems interesting (copied by
hand, please forgive any mistake):
PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:1f.2
ata_piix: probe of 0000:00:1f.2 failed with error -16
Of course, lspci for that device gives:
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev
02) (prog-if 8a [Master SecP PriP])
Subsystem: ABIT Computer Corp. Unknown device 1014
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at f000 [size=16]
HTH
--
Fabio Coatti http://members.ferrara.linux.it/cova
Ferrara Linux Users Group http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.
prev parent reply other threads:[~2006-11-12 11:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-05 14:36 SATA ICH5 not detected at boot, mm-kernels Fabio Coatti
2006-11-06 0:17 ` Andrew Morton
2006-11-06 12:43 ` Tejun Heo
2006-11-06 13:18 ` Fabio Coatti
2006-11-13 9:17 ` Fabio Coatti
2006-11-13 21:29 ` Andrew Morton
2006-11-14 21:52 ` Fabio Coatti
2006-11-14 22:45 ` Andrew Morton
2006-11-12 11:09 ` Fabio Coatti [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200611121209.31502.cova@ferrara.linux.it \
--to=cova@ferrara.linux.it \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.