From: David Kimdon <david.kimdon@devicescape.com>
To: netdev@vger.kernel.org
Cc: "John W. Linville" <linville@tuxdriver.com>,
Jiri Benc <jbenc@suse.cz>,
David Kimdon <david.kimdon@devicescape.com>
Subject: [take4 2/5] d80211: remove bitfields from ieee80211_tx_status
Date: Sun, 12 Nov 2006 09:52:42 -0800 [thread overview]
Message-ID: <20061112175242.GC11728@devicescape.com> (raw)
In-Reply-To: 20061112175216.027653000@devicescape.com
[-- Attachment #1: tx_status_bitfields.patch --]
[-- Type: text/plain, Size: 11729 bytes --]
Both one-bit bitfields have been subsumed into the new 'flags'
structure member and the new IEEE80211_TX_STATUS_* definitions.
Signed-off-by: David Kimdon <david.kimdon@devicescape.com>
Index: wireless-dev/include/net/d80211.h
===================================================================
--- wireless-dev.orig/include/net/d80211.h
+++ wireless-dev/include/net/d80211.h
@@ -211,8 +211,10 @@ struct ieee80211_tx_status {
/* copied ieee80211_tx_control structure */
struct ieee80211_tx_control control;
- unsigned int tx_filtered:1;
- unsigned int ack:1; /* whether the TX frame was ACKed */
+#define IEEE80211_TX_STATUS_TX_FILTERED (1<<0)
+#define IEEE80211_TX_STATUS_ACK (1<<1) /* whether the TX frame was ACKed */
+ u32 flags; /* tx staus flags defined above */
+
int ack_signal; /* measured signal strength of the ACK frame */
int excessive_retries;
int retry_count;
Index: wireless-dev/drivers/net/wireless/d80211/adm8211/adm8211.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/adm8211/adm8211.c
+++ wireless-dev/drivers/net/wireless/d80211/adm8211/adm8211.c
@@ -428,12 +428,14 @@ static void adm8211_interrupt_tci(struct
if (status & TDES0_STATUS_ES) {
stats->tx_errors++;
- priv->tx_buffers[entry].tx_status.ack = 0;
+ priv->tx_buffers[entry].tx_status.flags &=
+ ~IEEE80211_TX_STATUS_ACK;
if (status & (TDES0_STATUS_TUF | TDES0_STATUS_TRO))
stats->tx_fifo_errors++;
} else
- priv->tx_buffers[entry].tx_status.ack = 1;
+ priv->tx_buffers[entry].tx_status.flags |=
+ IEEE80211_TX_STATUS_ACK;
pci_unmap_single(priv->pdev, priv->tx_buffers[entry].mapping,
priv->tx_buffers[entry].skb->len, PCI_DMA_TODEVICE);
Index: wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c
+++ wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c
@@ -1127,7 +1127,8 @@ void bcm43xx_dma_handle_txstatus(struct
* status of the transmission.
* Some fields of txstat are already filled in dma_tx().
*/
- meta->txstat.ack = status->acked;
+ if (status->acked)
+ meta->txstat.flags |= IEEE80211_TX_STATUS_ACK;
meta->txstat.retry_count = status->frame_count - 1;
ieee80211_tx_status_irqsafe(bcm->net_dev, meta->skb, &(meta->txstat));
/* skb is freed by ieee80211_tx_status_irqsafe() */
Index: wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c
+++ wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c
@@ -500,7 +500,8 @@ void bcm43xx_pio_handle_txstatus(struct
queue->tx_devq_packets--;
queue->tx_devq_used -= (packet->skb->len + phy->txhdr_size);
- packet->txstat.ack = status->acked;
+ if (status->acked)
+ packet->txstat.flags |= IEEE80211_TX_STATUS_ACK;
packet->txstat.retry_count = status->frame_count - 1;
ieee80211_tx_status_irqsafe(bcm->net_dev, packet->skb,
&(packet->txstat));
Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
+++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
@@ -1749,10 +1749,11 @@ static void rt2400pci_txdone(void *data)
ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK);
+ entry->tx_status.flags = 0;
/*
- * TODO: How can te below field be set correctly?
+ * TODO: How can bit IEEE80211_TX_STATUS_TX_FILTERED of
+ * entry->tx_status.flags be set correctly?
*/
- entry->tx_status.tx_filtered = 0;
entry->tx_status.queue_length = ring->stats.limit;
entry->tx_status.queue_number = entry->tx_status.control.queue;
@@ -1764,11 +1765,10 @@ static void rt2400pci_txdone(void *data)
* was succesfull.
*/
tx_status = rt2x00_get_field32(txd->word0, TXD_W0_RESULT);
- entry->tx_status.ack = 0;
entry->tx_status.excessive_retries = 0;
if (ack && (tx_status == TX_SUCCESS ||
tx_status == TX_SUCCESS_RETRY))
- entry->tx_status.ack = 1;
+ entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK;
else if (ack && tx_status == TX_FAIL_RETRY) {
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
entry->tx_status.excessive_retries = 1;
Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
+++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
@@ -1898,10 +1898,11 @@ static void rt2500pci_txdone(void *data)
ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK);
+ entry->tx_status.flags = 0;
/*
- * TODO: How can te below field be set correctly?
+ * TODO: How can the IEEE80211_TX_STATUS_TX_FILTERED bit of
+ * entry->tx_status.flags be set correctly?
*/
- entry->tx_status.tx_filtered = 0;
entry->tx_status.queue_length = ring->stats.limit;
entry->tx_status.queue_number = entry->tx_status.control.queue;
@@ -1913,11 +1914,10 @@ static void rt2500pci_txdone(void *data)
* was succesfull.
*/
tx_status = rt2x00_get_field32(txd->word0, TXD_W0_RESULT);
- entry->tx_status.ack = 0;
entry->tx_status.excessive_retries = 0;
if (ack && (tx_status == TX_SUCCESS ||
tx_status == TX_SUCCESS_RETRY))
- entry->tx_status.ack = 1;
+ entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK;
else if (ack && tx_status == TX_FAIL_RETRY) {
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
entry->tx_status.excessive_retries = 1;
Index: wireless-dev/net/d80211/ieee80211.c
===================================================================
--- wireless-dev.orig/net/d80211/ieee80211.c
+++ wireless-dev/net/d80211/ieee80211.c
@@ -4047,13 +4047,13 @@ void ieee80211_tx_status(struct net_devi
* that this TX packet failed because of that.
*/
status->excessive_retries = 0;
- status->tx_filtered = 1;
+ status->flags |= IEEE80211_TX_STATUS_TX_FILTERED;
}
sta_info_put(sta);
}
}
- if (status->tx_filtered) {
+ if (status->flags & IEEE80211_TX_STATUS_TX_FILTERED) {
struct sta_info *sta;
sta = sta_info_get(local, hdr->addr1);
if (sta) {
@@ -4115,7 +4115,7 @@ void ieee80211_tx_status(struct net_devi
frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
- if (status->ack) {
+ if (status->flags & IEEE80211_TX_STATUS_ACK) {
if (frag == 0) {
local->dot11TransmittedFrameCount++;
if (is_multicast_ether_addr(hdr->addr1))
@@ -4144,8 +4144,8 @@ void ieee80211_tx_status(struct net_devi
return;
}
- msg_type = status->ack ? ieee80211_msg_tx_callback_ack :
- ieee80211_msg_tx_callback_fail;
+ msg_type = (status->flags & IEEE80211_TX_STATUS_ACK) ?
+ ieee80211_msg_tx_callback_ack : ieee80211_msg_tx_callback_fail;
/* skb was the original skb used for TX. Clone it and give the clone
* to netif_rx(). Free original skb. */
Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt61pci.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt61pci.c
+++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt61pci.c
@@ -2334,10 +2334,11 @@ static void rt61pci_txdone_entry(struct
ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK);
+ entry->tx_status.flags = 0;
/*
- * TODO: How can te below field be set correctly?
+ * TODO: How can the IEEE80211_TX_STATUS_TX_FILTERED bit of
+ * entry->tx_status.flags be set correctly?
*/
- entry->tx_status.tx_filtered = 0;
entry->tx_status.queue_length = entry->ring->stats.limit;
entry->tx_status.queue_number = entry->tx_status.control.queue;
@@ -2349,11 +2350,10 @@ static void rt61pci_txdone_entry(struct
* was succesfull.
*/
tx_status = rt2x00_get_field32(sta_csr4, STA_CSR4_TX_RESULT);
- entry->tx_status.ack = 0;
entry->tx_status.excessive_retries = 0;
if (ack && (tx_status == TX_SUCCESS ||
tx_status == TX_SUCCESS_RETRY))
- entry->tx_status.ack = 1;
+ entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK;
else if (ack && tx_status == TX_FAIL_RETRY) {
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
entry->tx_status.excessive_retries = 1;
Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
+++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
@@ -1686,10 +1686,11 @@ static void rt2500usb_txdone(void *data)
ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK);
+ entry->tx_status.flags = 0;
/*
- * TODO: How can te below field be set correctly?
+ * TODO: How can bit IEEE80211_TX_STATUS_TX_FILTERED of
+ * entry->tx_status.flags be set correctly?
*/
- entry->tx_status.tx_filtered = 0;
entry->tx_status.queue_length = entry->ring->stats.limit;
entry->tx_status.queue_number = entry->tx_status.control.queue;
@@ -1699,10 +1700,9 @@ static void rt2500usb_txdone(void *data)
* ACK response when ACK was requested and status
* was succesfull.
*/
- entry->tx_status.ack = 0;
entry->tx_status.excessive_retries = 0;
if (ack && (urb->status == TX_SUCCESS))
- entry->tx_status.ack = 1;
+ entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK;
else if (ack && urb->status == TX_FAIL_OTHER) {
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
entry->tx_status.excessive_retries = 1;
Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt73usb.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt73usb.c
+++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt73usb.c
@@ -1976,10 +1976,11 @@ static void rt73usb_txdone(void *data)
ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK);
+ entry->tx_status.flags = 0;
/*
- * TODO: How can te below field be set correctly?
+ * TODO: How can bit IEEE80211_TX_STATUS_TX_FILTERED of
+ * entry->tx_status.flags be set correctly?
*/
- entry->tx_status.tx_filtered = 0;
entry->tx_status.queue_length = entry->ring->stats.limit;
entry->tx_status.queue_number = entry->tx_status.control.queue;
@@ -1989,10 +1990,9 @@ static void rt73usb_txdone(void *data)
* ACK response when ACK was requested and status
* was succesfull.
*/
- entry->tx_status.ack = 0;
entry->tx_status.excessive_retries = 0;
if (ack && (urb->status == TX_SUCCESS))
- entry->tx_status.ack = 1;
+ entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK;
else {
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
entry->tx_status.excessive_retries = 1;
Index: wireless-dev/drivers/net/wireless/d80211/p54/prism54common.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/p54/prism54common.c
+++ wireless-dev/drivers/net/wireless/d80211/p54/prism54common.c
@@ -250,7 +250,8 @@ static void p54_rx_frame_sent(struct net
memcpy(&status.control, range->control,
sizeof(status.control));
kfree(range->control);
- status.ack = (payload->status >> 8) & 1;
+ if ((payload->status >> 8) & 1)
+ status.flags |= IEEE80211_TX_STATUS_ACK;
status.ack_signal = le16_to_cpu(payload->ack_rssi);
skb_pull(entry, sizeof(*hdr) + sizeof(struct p54_tx_control_allocdata));
ieee80211_tx_status_irqsafe(dev, entry, &status);
--
next prev parent reply other threads:[~2006-11-12 17:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20061112175216.027653000@devicescape.com>
2006-11-12 17:52 ` [take4 1/5] d80211: remove bitfields from ieee80211_tx_control David Kimdon
2006-11-12 17:52 ` David Kimdon [this message]
2006-11-12 17:52 ` [take4 3/5] d80211: remove bitfields from ieee80211_key_conf David Kimdon
2006-11-12 17:52 ` [take4 4/5] d80211: remove bitfields from ieee80211_hw David Kimdon
2006-11-12 17:52 ` [take4 5/5] d80211: remove bitfields from ieee80211_conf David Kimdon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061112175242.GC11728@devicescape.com \
--to=david.kimdon@devicescape.com \
--cc=jbenc@suse.cz \
--cc=linville@tuxdriver.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.