All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Coatti <cova@ferrara.linux.it>
To: Remi <remi.colinet@free.fr>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.19-rc5-mm1 : probe of 0000:00:1f.2 failed with error -16
Date: Mon, 13 Nov 2006 16:54:26 +0100	[thread overview]
Message-ID: <200611131654.27187.cova@ferrara.linux.it> (raw)
In-Reply-To: <1163431218.45588d325eddf@imp4-g19.free.fr>

Alle 16:20, lunedì 13 novembre 2006, Remi ha scritto:
> Selon Fabio Coatti <cova@ferrara.linux.it>:
> > > ata_piix: probe of 0000:00:1f.2 failed with error -16
> > > Kernel panic - not syncing: Attempted to kill init!
> > >
> > > I disabled most options in my .config file just keeping ata_piix
> > > enabled. 2.6.19-rc5 still boots fine but 2.6.19-rc-mm1 gives the same
> > > previous message.
> >
> > It seems exactly the same problem that is hitting me:
> >
> > http://lkml.org/lkml/2006/11/13/37
> >
> > If some patch comes out, I'll be willing to try it asap ;)
>
> You are getting the same message
>
> ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ]
> ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
> PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:1f.2
> ata_piix: probe of 0000:00:1f.2 failed with error -16
>
> But, your drives are driven by the sata_sil driver, which seems to be ok.
> See your partition tables displayed below.

Not exactly: my fault to not including previous mails, but basically I've two 
different devices: one driven by sata_sil, the other by piix.
cfr: http://lkml.org/lkml/2006/11/12/20
In this dmesg, the kernel finds only the second device, and assigns the 
name "sda"; of course the right drive (the real "sda" on my system) is not 
detected so the kernel is searching the "/" filesystem where it cannot be 
found.

here the relevant part of lspci output:

00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 
02) (prog-if 8a [Master SecP PriP])
        Subsystem: ABIT Computer Corp. Unknown device 1014
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at f000 [size=16]


03:03.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] 
Serial ATA Controller (rev 02)
        Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
        I/O ports at 8000 [size=8]
        I/O ports at 8400 [size=4]
        I/O ports at 8800 [size=8]
        I/O ports at 8c00 [size=4]
        I/O ports at 9000 [size=16]
        Memory at fb005000 (32-bit, non-prefetchable) [size=512]
        [virtual] Expansion ROM at 50000000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 2




-- 
Fabio "Cova" Coatti    http://members.ferrara.linux.it/cova     
Ferrara Linux Users Group           http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646  BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.

  reply	other threads:[~2006-11-13 15:54 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-11-13 13:44 2.6.19-rc5-mm1 : probe of 0000:00:1f.2 failed with error -16 Remi
2006-11-13 13:52 ` Fabio Coatti
2006-11-13 15:20   ` Remi
2006-11-13 15:54     ` Fabio Coatti [this message]
2006-11-13 16:27       ` Remi
2006-11-13 19:45         ` Fabio Coatti
2006-11-13 14:14 ` Alan
2006-11-13 14:59   ` Remi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200611131654.27187.cova@ferrara.linux.it \
    --to=cova@ferrara.linux.it \
    --cc=linux-kernel@vger.kernel.org \
    --cc=remi.colinet@free.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.