From: Adrian Bunk <bunk@stusta.de>
To: ysato@users.sourceforge.jp
Cc: linux-kernel@vger.kernel.org
Subject: [2.6 patch] include/asm-h8300/: "extern inline" -> "static inline"
Date: Wed, 22 Nov 2006 05:17:14 +0100 [thread overview]
Message-ID: <20061122041714.GY5200@stusta.de> (raw)
"extern inline" generates a warning with -Wmissing-prototypes and I'm
currently working on getting the kernel cleaned up for adding this to
the CFLAGS since it will help us to avoid a nasty class of runtime
errors.
If there are places that really need a forced inline, __always_inline
would be the correct solution.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
include/asm-h8300/delay.h | 4 ++--
include/asm-h8300/mmu_context.h | 4 ++--
include/asm-h8300/pci.h | 4 ++--
include/asm-h8300/tlbflush.h | 4 ++--
4 files changed, 8 insertions(+), 8 deletions(-)
--- linux-2.6.19-rc5-mm2/include/asm-h8300/delay.h.old 2006-11-22 01:48:48.000000000 +0100
+++ linux-2.6.19-rc5-mm2/include/asm-h8300/delay.h 2006-11-22 01:48:52.000000000 +0100
@@ -9,7 +9,7 @@
* Delay routines, using a pre-computed "loops_per_second" value.
*/
-extern __inline__ void __delay(unsigned long loops)
+static inline void __delay(unsigned long loops)
{
__asm__ __volatile__ ("1:\n\t"
"dec.l #1,%0\n\t"
@@ -27,7 +27,7 @@ extern __inline__ void __delay(unsigned
extern unsigned long loops_per_jiffy;
-extern __inline__ void udelay(unsigned long usecs)
+static inline void udelay(unsigned long usecs)
{
usecs *= 4295; /* 2**32 / 1000000 */
usecs /= (loops_per_jiffy*HZ);
--- linux-2.6.19-rc5-mm2/include/asm-h8300/mmu_context.h.old 2006-11-22 01:49:00.000000000 +0100
+++ linux-2.6.19-rc5-mm2/include/asm-h8300/mmu_context.h 2006-11-22 01:49:05.000000000 +0100
@@ -9,7 +9,7 @@ static inline void enter_lazy_tlb(struct
{
}
-extern inline int
+static inline int
init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
// mm->context = virt_to_phys(mm->pgd);
@@ -23,7 +23,7 @@ static inline void switch_mm(struct mm_s
{
}
-extern inline void activate_mm(struct mm_struct *prev_mm,
+static inline void activate_mm(struct mm_struct *prev_mm,
struct mm_struct *next_mm)
{
}
--- linux-2.6.19-rc5-mm2/include/asm-h8300/pci.h.old 2006-11-22 01:49:13.000000000 +0100
+++ linux-2.6.19-rc5-mm2/include/asm-h8300/pci.h 2006-11-22 01:49:19.000000000 +0100
@@ -10,12 +10,12 @@
#define pcibios_assign_all_busses() 0
#define pcibios_scan_all_fns(a, b) 0
-extern inline void pcibios_set_master(struct pci_dev *dev)
+static inline void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */
}
-extern inline void pcibios_penalize_isa_irq(int irq, int active)
+static inline void pcibios_penalize_isa_irq(int irq, int active)
{
/* We don't do dynamic PCI IRQ allocation */
}
--- linux-2.6.19-rc5-mm2/include/asm-h8300/tlbflush.h.old 2006-11-22 01:49:29.000000000 +0100
+++ linux-2.6.19-rc5-mm2/include/asm-h8300/tlbflush.h 2006-11-22 01:49:34.000000000 +0100
@@ -47,12 +47,12 @@ static inline void flush_tlb_range(struc
BUG();
}
-extern inline void flush_tlb_kernel_page(unsigned long addr)
+static inline void flush_tlb_kernel_page(unsigned long addr)
{
BUG();
}
-extern inline void flush_tlb_pgtables(struct mm_struct *mm,
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
unsigned long start, unsigned long end)
{
BUG();
next reply other threads:[~2006-11-22 4:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-22 4:17 Adrian Bunk [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-12-01 11:52 [2.6 patch] include/asm-h8300/: "extern inline" -> "static inline" Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061122041714.GY5200@stusta.de \
--to=bunk@stusta.de \
--cc=linux-kernel@vger.kernel.org \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.