Re: 2.6.18 - AHCI detection pauses excessively

[JG <jg@cms.ac>]

[-- Attachment #1: Type: text/plain, Size: 797 bytes --]

Hi,

> Looks like you forgot to attach the patch, so I couldn't test it:) 
> Here's the section with the annoying hang with timing info.  I
> noticed that there are similar messages repeated later, but without
> as much hang, so I've attached the entire dmesg as well, in case it's
> of any help.

any news on this? I didn't see the patch in 2.6.19-rc6-mm1, but maybe I
overlooked it.. :)

I'm currently using 2.6.19-rc6 and I have the same problem with my
Asus P5W Deluxe mainboard (BIOS v1407).

I have two disks attached, it seems detection fails on the SATA port
where no disk is connected.
BIOS is configured to use AHCI, kernel parameters are: 
kernel (hd0,0)/boot/2619rc6 init=/linuxrc root=/dev/ram0 rw hda=ide-cd
mousepoll=1

attached: complete output of dmesg/messages and lspci -vv

JG

[-- Attachment #2: messages.gz --]
[-- Type: application/x-gzip, Size: 7973 bytes --]

[-- Attachment #3: lspci.gz --]
[-- Type: application/x-gzip, Size: 2504 bytes --]