From: Bart Trojanowski <bart@jukie.net>
To: linux-kernel@vger.kernel.org
Subject: Re: 2.6.18.3 soft lockups and 2.6.19-rc6 rwlock OOPs on SMP x86-64
Date: Wed, 29 Nov 2006 14:08:15 -0500 [thread overview]
Message-ID: <20061129190815.GK2418@jukie.net> (raw)
In-Reply-To: <20061129173129.GJ2418@jukie.net>
One more update. I rebuilt 2.6.19-rc6 and turned off CONFIG_PREEMPT_BKL.
It didn't help much.
I am still getting BUG dumps from the kernel, however they don't cause
freezes immediately. It takes a few minutes of console output before
the computer stops responding to my input.
As I was writing the above I tried building again under 2.6.19-rc6. The
kernel OOPSed with a NULL pointer dereference.
-Bart
[ 1273.206537] Unable to handle kernel NULL pointer dereference at 0000000000000005 RIP:
[ 1273.212025] [<ffffffff8100784f>] _raw_spin_lock+0x1f/0x140
[ 1273.220130] PGD 15465067 PUD 15427067 PMD 0
[ 1273.224477] Oops: 0000 [1] SMP
[ 1273.227681] CPU 0
[ 1273.229733] Modules linked in: ide_cd cdrom binfmt_misc ipv6 container battery asus_acpi ac nfs lockd sunrpc af_packet rtc parport_pc lp parport
[ 1273.243012] Pid: 13785, comm: make Not tainted 2.6.19-rc6-xenon64-smp.10 #1
[ 1273.249991] RIP: 0010:[<ffffffff8100784f>] [<ffffffff8100784f>] _raw_spin_lock+0x1f/0x140
[ 1273.258313] RSP: 0018:ffffffff8155af38 EFLAGS: 00010092
[ 1273.263649] RAX: 0000000000009e40 RBX: 0000000000000001 RCX: 0000000000000000
[ 1273.270802] RDX: 0000000000000001 RSI: ffffffff814f7d80 RDI: 0000000000000001
[ 1273.277955] RBP: ffffffff81447060 R08: 0000000000000001 R09: 0000000000000000
[ 1273.285107] R10: 0000000000004008 R11: 0000000000000000 R12: 0000000000000000
[ 1273.292253] R13: 0000000000000001 R14: 00000000ffffffff R15: 0000000000000001
[ 1273.299407] FS: 00002b6c23c6cae0(0000) GS:ffffffff814f7000(0000) knlGS:0000000000000000
[ 1273.307530] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1273.313296] CR2: 0000000000000005 CR3: 0000000014066000 CR4: 00000000000006e0
[ 1273.320442] Process make (pid: 13785, threadinfo ffff8100132d2000, task ffff81001845f0c0)
[ 1273.328651] Stack: ffffffff814f7d80 ffffffff81447060 0000000000000000 0000000000000001
[ 1273.336784] 00000000ffffffff ffffffff810b6f09 ffffffff8106624c ffffffff81554c30
[ 1273.344292] 0000000000000020 0000000000000000 ffff8100185cbda0 ffffffff81073f0a
[ 1273.351584] Call Trace:
[ 1273.354269] <IRQ> [<ffffffff810b6f09>] handle_edge_irq+0x119/0x150
[ 1273.360672] [<ffffffff8106624c>] call_softirq+0x1c/0x28
[ 1273.366007] [<ffffffff81073f0a>] do_IRQ+0x8a/0xe0
[ 1273.370819] [<ffffffff81065641>] ret_from_intr+0x0/0xa
[ 1273.376066] <EOI> [<ffffffff81069f67>] __mutex_lock_slowpath+0x1d7/0x1f0
[ 1273.382990] [<ffffffff81023409>] dbg_redzone1+0x19/0x30
[ 1273.388323] [<ffffffff810cfa45>] pipe_read+0x75/0x400
[ 1273.393485] [<ffffffff8106b129>] _spin_unlock_irq+0x9/0x10
[ 1273.399079] [<ffffffff8100ca1f>] do_sync_read+0xcf/0x120
[ 1273.404503] [<ffffffff810a06a0>] autoremove_wake_function+0x0/0x30
[ 1273.410787] [<ffffffff8103f739>] remove_wait_queue+0x19/0x60
[ 1273.416554] [<ffffffff8106b129>] _spin_unlock_irq+0x9/0x10
[ 1273.422151] [<ffffffff8102b33a>] do_sigaction+0x1aa/0x1d0
[ 1273.427656] [<ffffffff8100b08b>] vfs_read+0xdb/0x1a0
[ 1273.432733] [<ffffffff81011db3>] sys_read+0x53/0x90
[ 1273.437720] [<ffffffff8106511e>] system_call+0x7e/0x83
[ 1273.442967]
[ 1273.444481]
[ 1273.444482] Code: 81 7f 04 ad 4e ad de 74 0c 48 c7 c6 dc 30 3c 81 e8 1c c2 00
[ 1273.453619] RIP [<ffffffff8100784f>] _raw_spin_lock+0x1f/0x140
[ 1273.459577] RSP <ffffffff8155af38>
[ 1273.463085] CR2: 0000000000000005
[ 1273.466569] <3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
[ 1273.474672] in_atomic():1, irqs_disabled():1
[ 1273.478984]
[ 1273.478985] Call Trace:
[ 1273.483002] <IRQ> [<ffffffff810a2e85>] down_read+0x15/0x30
[ 1273.488747] [<ffffffff81099b80>] blocking_notifier_call_chain+0x20/0x50
[ 1273.495484] [<ffffffff81015c52>] do_exit+0x22/0x8c0
[ 1273.500491] [<ffffffff8106b169>] _spin_lock_irqsave+0x9/0x10
[ 1273.506277] [<ffffffff811d17b6>] vgacon_set_cursor_size+0x36/0xf0
[ 1273.512494] [<ffffffff8106d809>] do_page_fault+0x7a9/0x8b0
[ 1273.518107] [<ffffffff81063908>] blk_run_queue+0x28/0x80
[ 1273.523546] [<ffffffff812561bb>] scsi_next_command+0x3b/0x60
[ 1273.529330] [<ffffffff8106b58d>] error_exit+0x0/0x84
[ 1273.534422] [<ffffffff8100784f>] _raw_spin_lock+0x1f/0x140
[ 1273.540035] [<ffffffff810b6f09>] handle_edge_irq+0x119/0x150
[ 1273.545817] [<ffffffff8106624c>] call_softirq+0x1c/0x28
[ 1273.551171] [<ffffffff81073f0a>] do_IRQ+0x8a/0xe0
[ 1273.556002] [<ffffffff81065641>] ret_from_intr+0x0/0xa
[ 1273.561267] <EOI> [<ffffffff81069f67>] __mutex_lock_slowpath+0x1d7/0x1f0
[ 1273.568224] [<ffffffff81023409>] dbg_redzone1+0x19/0x30
[ 1273.573574] [<ffffffff810cfa45>] pipe_read+0x75/0x400
[ 1273.578754] [<ffffffff8106b129>] _spin_unlock_irq+0x9/0x10
[ 1273.584365] [<ffffffff8100ca1f>] do_sync_read+0xcf/0x120
[ 1273.589804] [<ffffffff810a06a0>] autoremove_wake_function+0x0/0x30
[ 1273.596108] [<ffffffff8103f739>] remove_wait_queue+0x19/0x60
[ 1273.601894] [<ffffffff8106b129>] _spin_unlock_irq+0x9/0x10
[ 1273.607505] [<ffffffff8102b33a>] do_sigaction+0x1aa/0x1d0
[ 1273.613030] [<ffffffff8100b08b>] vfs_read+0xdb/0x1a0
[ 1273.618124] [<ffffffff81011db3>] sys_read+0x53/0x90
[ 1273.623128] [<ffffffff8106511e>] system_call+0x7e/0x83
[ 1273.628393]
[ 1273.629960] Kernel panic - not syncing: Aiee, killing interrupt handler!
--
WebSig: http://www.jukie.net/~bart/sig/
prev parent reply other threads:[~2006-11-29 19:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-29 17:02 2.6.18.3 SMP PREEMPT crashes (x86-64) Bart Trojanowski
2006-11-29 17:12 ` Prakash Punnoor
2006-11-29 21:07 ` Bart Trojanowski
2006-11-30 19:02 ` 2.6.19 SMP x86-64 crashes continue Bart Trojanowski
2006-11-29 17:31 ` 2.6.18.3 SMP PREEMPT crashes (x86-64) Bart Trojanowski
2006-11-29 19:08 ` Bart Trojanowski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061129190815.GK2418@jukie.net \
--to=bart@jukie.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.