From: Torben Mathiasen <torben.mathiasen@hp.com>
To: akpm@osdl.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] New updated devices.txt - LANANA
Date: Fri, 1 Dec 2006 11:30:51 +0100 [thread overview]
Message-ID: <20061201103051.GA31988@linux> (raw)
Here's the updated version with additonal spelling fixes.
Please use this one instead of the one that was sent 2 days ago.
Thanks,
Torben
--- linux-2.6.19-rc6/Documentation/devices.txt 2006-11-16 05:03:40.000000000 +0100
+++ linux-2.6.19-rc6new/Documentation/devices.txt 2006-12-01 11:04:28.000000000 +0100
@@ -3,7 +3,7 @@
Maintained by Torben Mathiasen <device@lanana.org>
- Last revised: 15 May 2006
+ Last revised: 29 November 2006
This list is the Linux Device List, the official registry of allocated
device numbers and /dev directory nodes for the Linux operating
@@ -92,7 +92,7 @@ Your cooperation is appreciated.
7 = /dev/full Returns ENOSPC on write
8 = /dev/random Nondeterministic random number gen.
9 = /dev/urandom Faster, less secure random number gen.
- 10 = /dev/aio Asyncronous I/O notification interface
+ 10 = /dev/aio Asynchronous I/O notification interface
11 = /dev/kmsg Writes to this come out as printk's
1 block RAM disk
0 = /dev/ram0 First RAM disk
@@ -122,7 +122,7 @@ Your cooperation is appreciated.
devices are on major 128 and above and use the PTY
master multiplex (/dev/ptmx) to acquire a PTY on
demand.
-
+
2 block Floppy disks
0 = /dev/fd0 Controller 0, drive 0, autodetect
1 = /dev/fd1 Controller 0, drive 1, autodetect
@@ -257,7 +257,7 @@ Your cooperation is appreciated.
129 = /dev/vcsa1 tty1 text/attribute contents
...
191 = /dev/vcsa63 tty63 text/attribute contents
-
+
NOTE: These devices permit both read and write access.
7 block Loopback devices
@@ -411,7 +411,7 @@ Your cooperation is appreciated.
207 = /dev/video/em8300_sp EM8300 DVD decoder subpicture
208 = /dev/compaq/cpqphpc Compaq PCI Hot Plug Controller
209 = /dev/compaq/cpqrid Compaq Remote Insight Driver
- 210 = /dev/impi/bt IMPI coprocessor block transfer
+ 210 = /dev/impi/bt IMPI coprocessor block transfer
211 = /dev/impi/smic IMPI coprocessor stream interface
212 = /dev/watchdogs/0 First watchdog device
213 = /dev/watchdogs/1 Second watchdog device
@@ -582,7 +582,7 @@ Your cooperation is appreciated.
This device is used on the ARM-based Acorn RiscPC.
Partitions are handled the same way as for IDE disks
- (see major number 3).
+ (see major number 3).
22 char Digiboard serial card
0 = /dev/ttyD0 First Digiboard port
@@ -591,7 +591,7 @@ Your cooperation is appreciated.
22 block Second IDE hard disk/CD-ROM interface
0 = /dev/hdc Master: whole disk (or CD-ROM)
64 = /dev/hdd Slave: whole disk (or CD-ROM)
-
+
Partitions are handled the same way as for the first
interface (see major number 3).
@@ -801,7 +801,7 @@ Your cooperation is appreciated.
34 block Fourth IDE hard disk/CD-ROM interface
0 = /dev/hdg Master: whole disk (or CD-ROM)
64 = /dev/hdh Slave: whole disk (or CD-ROM)
-
+
Partitions are handled the same way as for the first
interface (see major number 3).
@@ -939,7 +939,7 @@ Your cooperation is appreciated.
16 = /dev/ftlb FTL on second Memory Technology Device
32 = /dev/ftlc FTL on third Memory Technology Device
...
- 240 = /dev/ftlp FTL on 16th Memory Technology Device
+ 240 = /dev/ftlp FTL on 16th Memory Technology Device
Partitions are handled in the same way as for IDE
disks (see major number 3) except that the partition
@@ -1093,7 +1093,7 @@ Your cooperation is appreciated.
55 char DSP56001 digital signal processor
0 = /dev/dsp56k First DSP56001
- 55 block Mylex DAC960 PCI RAID controller; eigth controller
+ 55 block Mylex DAC960 PCI RAID controller; eighth controller
0 = /dev/rd/c7d0 First disk, whole disk
8 = /dev/rd/c7d1 Second disk, whole disk
...
@@ -1456,7 +1456,7 @@ Your cooperation is appreciated.
1 = /dev/cum1 Callout device for ttyM1
...
- 79 block Compaq Intelligent Drive Array, eigth controller
+ 79 block Compaq Intelligent Drive Array, eighth controller
0 = /dev/ida/c7d0 First logical drive whole disk
16 = /dev/ida/c7d1 Second logical drive whole disk
...
@@ -1695,7 +1695,7 @@ Your cooperation is appreciated.
1 = /dev/ipnat NAT control device/log file
2 = /dev/ipstate State information log file
3 = /dev/ipauth Authentication control device/log file
- ...
+ ...
96 char Parallel port ATAPI tape devices
0 = /dev/pt0 First parallel port ATAPI tape
@@ -1900,7 +1900,7 @@ Your cooperation is appreciated.
1 = /dev/av1 Second A/V card
...
-111 block Compaq Next Generation Drive Array, eigth controller
+111 block Compaq Next Generation Drive Array, eighth controller
0 = /dev/cciss/c7d0 First logical drive, whole disk
16 = /dev/cciss/c7d1 Second logical drive, whole disk
...
@@ -2427,7 +2427,7 @@ Your cooperation is appreciated.
Partitions are handled in the same way as for IDE
disks (see major number 3) except that the limit on
- partitions is 31.
+ partitions is 31.
162 char Raw block device interface
0 = /dev/rawctl Raw I/O control device
@@ -2543,9 +2543,6 @@ Your cooperation is appreciated.
64 = /dev/usb/rio500 Diamond Rio 500
65 = /dev/usb/usblcd USBLCD Interface (info@usblcd.de)
66 = /dev/usb/cpad0 Synaptics cPad (mouse/LCD)
- 67 = /dev/usb/adutux0 1st Ontrak ADU device
- ...
- 76 = /dev/usb/adutux10 10th Ontrak ADU device
96 = /dev/usb/hiddev0 1st USB HID device
...
111 = /dev/usb/hiddev15 16th USB HID device
@@ -2558,7 +2555,7 @@ Your cooperation is appreciated.
132 = /dev/usb/idmouse ID Mouse (fingerprint scanner) device
133 = /dev/usb/sisusbvga1 First SiSUSB VGA device
...
- 140 = /dev/usb/sisusbvga8 Eigth SISUSB VGA device
+ 140 = /dev/usb/sisusbvga8 Eighth SISUSB VGA device
144 = /dev/usb/lcd USB LCD device
160 = /dev/usb/legousbtower0 1st USB Legotower device
...
@@ -2571,7 +2568,7 @@ Your cooperation is appreciated.
0 = /dev/uba First USB block device
8 = /dev/ubb Second USB block device
16 = /dev/ubc Third USB block device
- ...
+ ...
181 char Conrad Electronic parallel port radio clocks
0 = /dev/pcfclock0 First Conrad radio clock
@@ -2657,7 +2654,7 @@ Your cooperation is appreciated.
32 = /dev/mvideo/status2 Third device
...
...
- 240 = /dev/mvideo/status15 16th device
+ 240 = /dev/mvideo/status15 16th device
...
195 char Nvidia graphics devices
@@ -2795,6 +2792,10 @@ Your cooperation is appreciated.
...
185 = /dev/ttyNX15 Hilscher netX serial port 15
186 = /dev/ttyJ0 JTAG1 DCC protocol based serial port emulation
+ 187 = /dev/ttyUL0 Xilinx uartlite - port 0
+ ...
+ 190 = /dev/ttyUL3 Xilinx uartlite - port 3
+ 191 = /dev/xvc0 Xen virtual console - port 0
205 char Low-density serial ports (alternate device)
0 = /dev/culu0 Callout device for ttyLU0
@@ -3008,9 +3009,9 @@ Your cooperation is appreciated.
2 = /dev/3270/tub2 Second 3270 terminal
...
-229 char IBM iSeries virtual console
- 0 = /dev/iseries/vtty0 First console port
- 1 = /dev/iseries/vtty1 Second console port
+229 char IBM iSeries/pSeries virtual console
+ 0 = /dev/hvc0 First console port
+ 1 = /dev/hvc1 Second console port
...
230 char IBM iSeries virtual tape
@@ -3115,7 +3116,20 @@ Your cooperation is appreciated.
257 char Phoenix Technologies Cryptographic Services Driver
0 = /dev/ptlsec Crypto Services Driver
-
+257 block SSFDC Flash Translation Layer filesystem
+ 0 = /dev/ssfdca First SSFDC layer
+ 8 = /dev/ssfdcb Second SSFDC layer
+ 16 = /dev/ssfdcc Third SSFDC layer
+ 24 = /dev/ssfdcd 4th SSFDC layer
+ 32 = /dev/ssfdce 5th SSFDC layer
+ 40 = /dev/ssfdcf 6th SSFDC layer
+ 48 = /dev/ssfdcg 7th SSFDC layer
+ 56 = /dev/ssfdch 8th SSFDC layer
+
+258 block ROM/Flash read-only translation layer
+ 0 = /dev/blockrom0 First ROM card's translation layer interface
+ 1 = /dev/blockrom1 Second ROM card's translation layer interface
+ ...
**** ADDITIONAL /dev DIRECTORY ENTRIES
next reply other threads:[~2006-12-01 12:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-01 10:30 Torben Mathiasen [this message]
2006-12-01 20:07 ` [PATCH] New updated devices.txt - LANANA Jan Engelhardt
2006-12-01 20:14 ` Mathiasen, Torben
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061201103051.GA31988@linux \
--to=torben.mathiasen@hp.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.