From: Paul Mundt <lethal@linux-sh.org>
To: Linus Torvalds <torvalds@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: [GIT PULL] sh updates
Date: Wed, 6 Dec 2006 12:22:23 +0900 [thread overview]
Message-ID: <20061206032223.GB5101@linux-sh.org> (raw)
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
Which contains:
Jamie Lenehan (1):
sh: sh775x/titan fixes for irq header changes.
Mark Glaisher (1):
sh: dma-api channel capability extensions.
Paul Mundt (29):
sh: SE7206 build fixes.
sh: Fixup entry-common path breakage for SH-3.
sh: Configurable timer IRQ.
sh: Drop CPU subtype IRQ headers.
sh: Hook SH7785 in to the build system.
sh: Preliminary support for SH-X2 MMU.
sh: p3map_sem sem2mutex conversion.
sh: Explicit endian selection support.
sh: generic push-switch framework.
sh: R7780RP push-switch support.
sh: dma-sysfs fixes.
sh: Make dma-isa depend on ISA_DMA_API.
sh: Drop name overload in dma-sh.
sh: Fixup 4K irq stacks.
sh: Fixup various PAGE_SIZE == 4096 assumptions.
sh: More flexible + SH7780 earlyprintk SCIF support.
sh: Fix store queue bitmap end.
sh: Get the PGD right in oops case with 64-bit PTEs.
sh: Turn off IRQs around get_timer_offset() calls.
sh: Clock framework tidying.
sh: dyntick infrastructure.
sh: Fixup movli.l/movco.l atomic ops for gcc4.
sh: stacktrace/lockdep/irqflags tracing support.
sh: platform_pata support for R7780RP
sh: show held locks in stack trace with lockdep.
sh: set KBUILD_IMAGE to something sensible.
sh: Fixup pte_mkhuge() build failure.
sh: compile fixes for header cleanup.
sh: update r7780rp defconfig.
Stuart Menefy (7):
sh: gcc4 support.
sh: Set up correct siginfo structures for page faults.
sh: Use MMU.TTB register as pointer to current pgd.
sh: pmd rework.
sh: TLB miss fast-path optimizations.
sh: KSTK_EIP/KSTK_ESP consistency.
sh: Fix syscall tracing ordering.
Yoshinori Sato (5):
sh: Add support for SH7206 and SH7619 CPU subtypes.
sh: Wire up division and address error exceptions on SH-2A.
sh: Exception vector rework and SH-2/SH-2A support.
sh: Add SH-2A platform headers.
sh: Add support for Solution Engine 7206 and 7619 boards.
arch/sh/Kconfig | 100 +++
arch/sh/Kconfig.debug | 22
arch/sh/Makefile | 26
arch/sh/boards/renesas/r7780rp/Makefile | 4
arch/sh/boards/renesas/r7780rp/irq.c | 1
arch/sh/boards/renesas/r7780rp/psw.c | 122 ++++
arch/sh/boards/renesas/r7780rp/setup.c | 29 +
arch/sh/boards/se/7206/Makefile | 7
arch/sh/boards/se/7206/io.c | 123 ++++
arch/sh/boards/se/7206/irq.c | 139 +++++
arch/sh/boards/se/7206/led.c | 57 ++
arch/sh/boards/se/7206/setup.c | 79 ++
arch/sh/boards/se/7619/Makefile | 5
arch/sh/boards/se/7619/io.c | 102 +++
arch/sh/boards/se/7619/setup.c | 43 +
arch/sh/boards/titan/setup.c | 27 -
arch/sh/boot/compressed/misc.c | 3
arch/sh/configs/r7780rp_defconfig | 69 +-
arch/sh/configs/se7206_defconfig | 826 +++++++++++++++++++++++++++++++
arch/sh/drivers/Kconfig | 9
arch/sh/drivers/Makefile | 2
arch/sh/drivers/dma/Makefile | 4
arch/sh/drivers/dma/dma-api.c | 274 +++++++---
arch/sh/drivers/dma/dma-sh.c | 9
arch/sh/drivers/dma/dma-sysfs.c | 23
arch/sh/drivers/pci/ops-titan.c | 24
arch/sh/drivers/pci/pci-sh7780.c | 14
arch/sh/drivers/push-switch.c | 138 +++++
arch/sh/kernel/Makefile | 3
arch/sh/kernel/cpu/Makefile | 11
arch/sh/kernel/cpu/clock.c | 27 -
arch/sh/kernel/cpu/init.c | 2
arch/sh/kernel/cpu/irq/Makefile | 3
arch/sh/kernel/cpu/irq/imask.c | 5
arch/sh/kernel/cpu/irq/intc2.c | 25
arch/sh/kernel/cpu/irq/ipr.c | 93 ---
arch/sh/kernel/cpu/sh2/Makefile | 3
arch/sh/kernel/cpu/sh2/clock-sh7619.c | 81 +++
arch/sh/kernel/cpu/sh2/entry.S | 341 ++++++++++++
arch/sh/kernel/cpu/sh2/ex.S | 46 +
arch/sh/kernel/cpu/sh2/probe.c | 16
arch/sh/kernel/cpu/sh2/setup-sh7619.c | 53 ++
arch/sh/kernel/cpu/sh2a/Makefile | 10
arch/sh/kernel/cpu/sh2a/clock-sh7206.c | 85 +++
arch/sh/kernel/cpu/sh2a/probe.c | 39 +
arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 58 ++
arch/sh/kernel/cpu/sh3/Makefile | 2
arch/sh/kernel/cpu/sh3/clock-sh7709.c | 2
arch/sh/kernel/cpu/sh3/entry.S | 693 ++++++++++++++++++++++++++
arch/sh/kernel/cpu/sh4/Makefile | 3
arch/sh/kernel/cpu/sh4/clock-sh4-202.c | 4
arch/sh/kernel/cpu/sh4/clock-sh7780.c | 2
arch/sh/kernel/cpu/sh4/fpu.c | 25
arch/sh/kernel/cpu/sh4/probe.c | 19
arch/sh/kernel/cpu/sh4/setup-sh7750.c | 70 ++
arch/sh/kernel/cpu/sh4/setup-sh7780.c | 36 -
arch/sh/kernel/cpu/sh4/sq.c | 11
arch/sh/kernel/early_printk.c | 44 -
arch/sh/kernel/entry-common.S | 433 ++++++++++++++++
arch/sh/kernel/entry.S | 843 --------------------------------
arch/sh/kernel/head.S | 17
arch/sh/kernel/irq.c | 55 +-
arch/sh/kernel/process.c | 32 -
arch/sh/kernel/relocate_kernel.S | 14
arch/sh/kernel/setup.c | 2
arch/sh/kernel/sh_ksyms.c | 2
arch/sh/kernel/signal.c | 36 -
arch/sh/kernel/stacktrace.c | 43 +
arch/sh/kernel/sys_sh.c | 7
arch/sh/kernel/time.c | 139 +++++
arch/sh/kernel/timers/Makefile | 2
arch/sh/kernel/timers/timer-cmt.c | 196 +++++++
arch/sh/kernel/timers/timer-mtu2.c | 200 +++++++
arch/sh/kernel/timers/timer-tmu.c | 13
arch/sh/kernel/timers/timer.c | 6
arch/sh/kernel/traps.c | 200 +++++--
arch/sh/mm/Kconfig | 77 ++
arch/sh/mm/cache-sh2.c | 69 +-
arch/sh/mm/cache-sh4.c | 18
arch/sh/mm/clear_page.S | 18
arch/sh/mm/copy_page.S | 16
arch/sh/mm/fault.c | 161 ++----
arch/sh/mm/init.c | 45 -
arch/sh/mm/ioremap.c | 4
arch/sh/mm/pg-dma.c | 2
arch/sh/mm/pg-sh4.c | 35 -
arch/sh/tools/mach-types | 2
drivers/serial/sh-sci.c | 6
drivers/serial/sh-sci.h | 37 +
include/asm-sh/atomic.h | 48 -
include/asm-sh/bugs.h | 8
include/asm-sh/clock.h | 12
include/asm-sh/cpu-sh2/cache.h | 22
include/asm-sh/cpu-sh2/freq.h | 18
include/asm-sh/cpu-sh2/mmu_context.h | 16
include/asm-sh/cpu-sh2/timer.h | 6
include/asm-sh/cpu-sh2a/addrspace.h | 1
include/asm-sh/cpu-sh2a/cache.h | 39 +
include/asm-sh/cpu-sh2a/cacheflush.h | 1
include/asm-sh/cpu-sh2a/dma.h | 1
include/asm-sh/cpu-sh2a/freq.h | 18
include/asm-sh/cpu-sh2a/mmu_context.h | 1
include/asm-sh/cpu-sh2a/timer.h | 1
include/asm-sh/cpu-sh2a/ubc.h | 1
include/asm-sh/cpu-sh2a/watchdog.h | 1
include/asm-sh/dma.h | 40 +
include/asm-sh/elf.h | 2
include/asm-sh/entry-macros.S | 33 +
include/asm-sh/irq-sh73180.h | 314 -----------
include/asm-sh/irq-sh7343.h | 317 ------------
include/asm-sh/irq-sh7780.h | 311 -----------
include/asm-sh/irq.h | 620 +----------------------
include/asm-sh/irqflags.h | 123 ++++
include/asm-sh/mmu_context.h | 44 -
include/asm-sh/page.h | 35 +
include/asm-sh/pgalloc.h | 20
include/asm-sh/pgtable-2level.h | 70 --
include/asm-sh/pgtable.h | 371 +++++++++++---
include/asm-sh/processor.h | 24
include/asm-sh/push-switch.h | 28 +
include/asm-sh/rwsem.h | 27 -
include/asm-sh/se7206.h | 13
include/asm-sh/system.h | 101 ---
include/asm-sh/thread_info.h | 8
include/asm-sh/timer.h | 23
include/asm-sh/titan.h | 32 -
include/asm-sh/unistd.h | 32 -
127 files changed, 6145 insertions(+), 3460 deletions(-)
next reply other threads:[~2006-12-06 3:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-06 3:22 Paul Mundt [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-05-07 2:18 [GIT PULL] sh updates Paul Mundt
2007-03-07 16:24 Paul Mundt
2007-02-15 16:13 Paul Mundt
2006-12-12 11:55 Paul Mundt
2006-10-31 3:58 Paul Mundt
2006-10-23 1:59 Paul Mundt
2006-10-12 3:21 Paul Mundt
2006-10-03 5:25 Paul Mundt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061206032223.GB5101@linux-sh.org \
--to=lethal@linux-sh.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.