From: "Kristian Høgsberg" <krh@redhat.com>
To: linux-kernel@vger.kernel.org, linux1394-devel@lists.sourceforge.net
Subject: [PATCH 3/4] Add driver for OHCI firewire host controllers.
Date: Tue, 19 Dec 2006 19:58:35 -0500 [thread overview]
Message-ID: <20061220005835.GE11746@devserv.devel.redhat.com> (raw)
Signed-off-by: Kristian Hoegsberg <krh@redhat.com>
---
drivers/firewire/Kconfig | 11
drivers/firewire/Makefile | 1
drivers/firewire/fw-ohci.c | 1394 ++++++++++++++++++++++++++++++++++++++++++++
drivers/firewire/fw-ohci.h | 152 +++++
4 files changed, 1558 insertions(+), 0 deletions(-)
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index bdd6303..b386334 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -20,4 +20,15 @@ config FW
To compile this driver as a module, say M here: the
module will be called fw-core.
+config FW_OHCI
+ tristate "Support for OHCI firewire host controllers"
+ depends on PCI && FW
+ help
+ Enable this driver if you have an firewire controller based
+ on the OHCI specification. For all practical purposes, this
+ is the only chipset in use, so say Y here.
+
+ To compile this driver as a module, say M here: the
+ module will be called fw-ohci.
+
endmenu
diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile
index da77bc0..add3b98 100644
--- a/drivers/firewire/Makefile
+++ b/drivers/firewire/Makefile
@@ -6,3 +6,4 @@ fw-core-objs := fw-card.o fw-topology.o
fw-device.o fw-device-cdev.o
obj-$(CONFIG_FW) += fw-core.o
+obj-$(CONFIG_FW_OHCI) += fw-ohci.o
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
new file mode 100644
index 0000000..5392a2b
--- /dev/null
+++ b/drivers/firewire/fw-ohci.c
@@ -0,0 +1,1394 @@
+/* -*- c-basic-offset: 8 -*-
+ *
+ * fw-ohci.c - Driver for OHCI 1394 boards
+ * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/poll.h>
+#include <asm/uaccess.h>
+#include <asm/semaphore.h>
+
+#include "fw-transaction.h"
+#include "fw-ohci.h"
+
+#define descriptor_output_more 0
+#define descriptor_output_last (1 << 12)
+#define descriptor_input_more (2 << 12)
+#define descriptor_input_last (3 << 12)
+#define descriptor_status (1 << 11)
+#define descriptor_key_immediate (2 << 8)
+#define descriptor_ping (1 << 7)
+#define descriptor_yy (1 << 6)
+#define descriptor_no_irq (0 << 4)
+#define descriptor_irq_error (1 << 4)
+#define descriptor_irq_always (3 << 4)
+#define descriptor_branch_always (3 << 2)
+
+struct descriptor {
+ __le16 req_count;
+ __le16 control;
+ __le32 data_address;
+ __le32 branch_address;
+ __le16 res_count;
+ __le16 transfer_status;
+} __attribute__((aligned(16)));
+
+struct ar_context {
+ struct fw_ohci *ohci;
+ struct descriptor descriptor;
+ __le32 buffer[512];
+ dma_addr_t descriptor_bus;
+ dma_addr_t buffer_bus;
+
+ u32 command_ptr;
+ u32 control_set;
+ u32 control_clear;
+
+ struct tasklet_struct tasklet;
+};
+
+struct at_context {
+ struct fw_ohci *ohci;
+ dma_addr_t descriptor_bus;
+ dma_addr_t buffer_bus;
+
+ struct list_head list;
+
+ struct {
+ struct descriptor more;
+ __le32 header[4];
+ struct descriptor last;
+ } d;
+
+ u32 command_ptr;
+ u32 control_set;
+ u32 control_clear;
+
+ struct tasklet_struct tasklet;
+};
+
+#define it_header_sy(v) ((v) << 0)
+#define it_header_tcode(v) ((v) << 4)
+#define it_header_channel(v) ((v) << 8)
+#define it_header_tag(v) ((v) << 14)
+#define it_header_speed(v) ((v) << 16)
+#define it_header_data_length(v) ((v) << 16)
+
+struct iso_context {
+ struct fw_iso_context base;
+ struct tasklet_struct tasklet;
+ u32 control_set;
+ u32 control_clear;
+ u32 command_ptr;
+ u32 context_match;
+
+ struct descriptor *buffer;
+ dma_addr_t buffer_bus;
+ struct descriptor *head_descriptor;
+ struct descriptor *tail_descriptor;
+ struct descriptor *tail_descriptor_last;
+ struct descriptor *prev_descriptor;
+};
+
+#define CONFIG_ROM_SIZE 1024
+
+struct fw_ohci {
+ struct fw_card card;
+
+ __iomem char *registers;
+ dma_addr_t self_id_bus;
+ __le32 *self_id_cpu;
+ struct tasklet_struct bus_reset_tasklet;
+ int generation;
+ int request_generation;
+
+ /* Spinlock for accessing fw_ohci data. Never call out of
+ * this driver with this lock held. */
+ spinlock_t lock;
+ u32 self_id_buffer[512];
+
+ /* Config rom buffers */
+ __be32 *config_rom;
+ dma_addr_t config_rom_bus;
+ __be32 *next_config_rom;
+ dma_addr_t next_config_rom_bus;
+ u32 next_header;
+
+ struct ar_context ar_request_ctx;
+ struct ar_context ar_response_ctx;
+ struct at_context at_request_ctx;
+ struct at_context at_response_ctx;
+
+ u32 it_context_mask;
+ struct iso_context *it_context_list;
+ u32 ir_context_mask;
+ struct iso_context *ir_context_list;
+};
+
+extern inline struct fw_ohci *fw_ohci(struct fw_card *card)
+{
+ return container_of(card, struct fw_ohci, card);
+}
+
+#define CONTEXT_CYCLE_MATCH_ENABLE 0x80000000
+
+#define CONTEXT_RUN 0x8000
+#define CONTEXT_WAKE 0x1000
+#define CONTEXT_DEAD 0x0800
+#define CONTEXT_ACTIVE 0x0400
+
+#define OHCI1394_MAX_AT_REQ_RETRIES 0x2
+#define OHCI1394_MAX_AT_RESP_RETRIES 0x2
+#define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8
+
+#define FW_OHCI_MAJOR 240
+#define OHCI1394_REGISTER_SIZE 0x800
+#define OHCI_LOOP_COUNT 500
+#define OHCI1394_PCI_HCI_Control 0x40
+#define SELF_ID_BUF_SIZE 0x800
+
+/* FIXME: Move this to linux/pci_ids.h */
+#define PCI_CLASS_SERIAL_FIREWIRE_OHCI 0x0c0010
+
+static char ohci_driver_name[] = KBUILD_MODNAME;
+
+extern inline void reg_write(const struct fw_ohci *ohci, int offset, u32 data)
+{
+ writel(data, ohci->registers + offset);
+}
+
+extern inline u32 reg_read(const struct fw_ohci *ohci, int offset)
+{
+ return readl(ohci->registers + offset);
+}
+
+extern inline void flush_writes(const struct fw_ohci *ohci)
+{
+ /* Do a dummy read to flush writes. */
+ reg_read(ohci, OHCI1394_Version);
+}
+
+static int
+ohci_update_phy_reg(struct fw_card *card, int addr,
+ int clear_bits, int set_bits)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ u32 val, old;
+
+ reg_write(ohci, OHCI1394_PhyControl, OHCI1394_PhyControl_Read(addr));
+ msleep(2);
+ val = reg_read(ohci, OHCI1394_PhyControl);
+ if ((val & OHCI1394_PhyControl_ReadDone) == 0) {
+ fw_error("failed to set phy reg bits.\n");
+ return -EBUSY;
+ }
+
+ old = OHCI1394_PhyControl_ReadData(val);
+ old = (old & ~clear_bits) | set_bits;
+ reg_write(ohci, OHCI1394_PhyControl,
+ OHCI1394_PhyControl_Write(addr, old));
+
+ return 0;
+}
+
+static void ar_context_run(struct ar_context *ctx)
+{
+ reg_write(ctx->ohci, ctx->command_ptr, ctx->descriptor_bus | 1);
+ reg_write(ctx->ohci, ctx->control_set, CONTEXT_RUN);
+ flush_writes(ctx->ohci);
+}
+
+static void ar_context_tasklet(unsigned long data)
+{
+ struct ar_context *ctx = (struct ar_context *)data;
+ struct fw_ohci *ohci = ctx->ohci;
+ u32 status;
+ int length, speed, ack, timestamp, tcode;
+
+ /* FIXME: What to do about evt_* errors? */
+ length = le16_to_cpu(ctx->descriptor.req_count) -
+ le16_to_cpu(ctx->descriptor.res_count) - 4;
+ status = le32_to_cpu(ctx->buffer[length / 4]);
+ ack = ((status >> 16) & 0x1f) - 16;
+ speed = (status >> 21) & 0x7;
+ timestamp = status & 0xffff;
+
+ ctx->buffer[0] = le32_to_cpu(ctx->buffer[0]);
+ ctx->buffer[1] = le32_to_cpu(ctx->buffer[1]);
+ ctx->buffer[2] = le32_to_cpu(ctx->buffer[2]);
+
+ tcode = (ctx->buffer[0] >> 4) & 0x0f;
+ if (TCODE_IS_BLOCK_PACKET(tcode))
+ ctx->buffer[3] = le32_to_cpu(ctx->buffer[3]);
+
+ /* The OHCI bus reset handler synthesizes a phy packet with
+ * the new generation number when a bus reset happens (see
+ * section 8.4.2.3). This helps us determine when a request
+ * was received and make sure we send the response in the same
+ * generation. We only need this for requests; for responses
+ * we use the unique tlabel for finding the matching
+ * request. */
+
+ if (ack + 16 == 0x09)
+ ohci->request_generation = (ctx->buffer[2] >> 16) & 0xff;
+ else if (ctx == &ohci->ar_request_ctx)
+ fw_core_handle_request(&ohci->card, speed, ack, timestamp,
+ ohci->request_generation,
+ length, ctx->buffer);
+ else
+ fw_core_handle_response(&ohci->card, speed, ack, timestamp,
+ length, ctx->buffer);
+
+ ctx->descriptor.data_address = cpu_to_le32(ctx->buffer_bus);
+ ctx->descriptor.req_count = cpu_to_le16(sizeof ctx->buffer);
+ ctx->descriptor.res_count = cpu_to_le16(sizeof ctx->buffer);
+
+ dma_sync_single_for_device(ohci->card.device, ctx->descriptor_bus,
+ sizeof ctx->descriptor_bus, DMA_TO_DEVICE);
+
+ /* FIXME: We stop and restart the ar context here, what if we
+ * stop while a receive is in progress? Maybe we could just
+ * loop the context back to itself and use it in buffer fill
+ * mode as intended... */
+
+ reg_write(ctx->ohci, ctx->control_clear, CONTEXT_RUN);
+ ar_context_run(ctx);
+}
+
+static int
+ar_context_init(struct ar_context *ctx, struct fw_ohci *ohci, u32 control_set)
+{
+ ctx->descriptor_bus =
+ dma_map_single(ohci->card.device, &ctx->descriptor,
+ sizeof ctx->descriptor, DMA_TO_DEVICE);
+ if (ctx->descriptor_bus == 0)
+ return -ENOMEM;
+
+ if (ctx->descriptor_bus & 0xf)
+ fw_notify("descriptor not 16-byte aligned: 0x%08x\n",
+ ctx->descriptor_bus);
+
+ ctx->buffer_bus =
+ dma_map_single(ohci->card.device, ctx->buffer,
+ sizeof ctx->buffer, DMA_FROM_DEVICE);
+
+ if (ctx->buffer_bus == 0) {
+ dma_unmap_single(ohci->card.device, ctx->descriptor_bus,
+ sizeof ctx->descriptor, DMA_TO_DEVICE);
+ return -ENOMEM;
+ }
+
+ memset(&ctx->descriptor, 0, sizeof ctx->descriptor);
+ ctx->descriptor.control = cpu_to_le16(descriptor_input_more |
+ descriptor_status |
+ descriptor_branch_always);
+ ctx->descriptor.req_count = cpu_to_le16(sizeof ctx->buffer);
+ ctx->descriptor.data_address = cpu_to_le32(ctx->buffer_bus);
+ ctx->descriptor.res_count = cpu_to_le16(sizeof ctx->buffer);
+
+ ctx->control_set = control_set;
+ ctx->control_clear = control_set + 4;
+ ctx->command_ptr = control_set + 12;
+ ctx->ohci = ohci;
+
+ tasklet_init(&ctx->tasklet, ar_context_tasklet, (unsigned long)ctx);
+
+ ar_context_run(ctx);
+
+ return 0;
+}
+
+static void
+do_packet_callbacks(struct fw_ohci *ohci, struct list_head *list)
+{
+ struct fw_packet *p, *next;
+
+ list_for_each_entry_safe(p, next, list, link)
+ p->callback(p, &ohci->card, p->status);
+}
+
+static void
+complete_transmission(struct fw_packet *packet,
+ int status, struct list_head *list)
+{
+ list_move_tail(&packet->link, list);
+ packet->status = status;
+}
+
+/* This function prepares the first packet in the context queue for
+ * transmission. Must always be called with the ochi->lock held to
+ * ensure proper generation handling and locking around packet queue
+ * manipulation. */
+static void
+at_context_setup_packet(struct at_context *ctx, struct list_head *list)
+{
+ struct fw_packet *packet;
+ struct fw_ohci *ohci = ctx->ohci;
+ int z, tcode;
+
+ packet = fw_packet(ctx->list.next);
+
+ memset(&ctx->d, 0, sizeof ctx->d);
+ if (packet->payload_length > 0) {
+ packet->payload_bus = dma_map_single(ohci->card.device,
+ packet->payload,
+ packet->payload_length,
+ DMA_TO_DEVICE);
+ if (packet->payload_bus == 0) {
+ complete_transmission(packet, -ENOMEM, list);
+ return;
+ }
+
+ ctx->d.more.control =
+ cpu_to_le16(descriptor_output_more |
+ descriptor_key_immediate);
+ ctx->d.more.req_count = cpu_to_le16(packet->header_length);
+ ctx->d.more.res_count = cpu_to_le16(packet->timestamp);
+ ctx->d.last.control =
+ cpu_to_le16(descriptor_output_last |
+ descriptor_irq_always |
+ descriptor_branch_always);
+ ctx->d.last.req_count = cpu_to_le16(packet->payload_length);
+ ctx->d.last.data_address = cpu_to_le32(packet->payload_bus);
+ z = 3;
+ } else {
+ ctx->d.more.control =
+ cpu_to_le16(descriptor_output_last |
+ descriptor_key_immediate |
+ descriptor_irq_always |
+ descriptor_branch_always);
+ ctx->d.more.req_count = cpu_to_le16(packet->header_length);
+ ctx->d.more.res_count = cpu_to_le16(packet->timestamp);
+ z = 2;
+ }
+
+ /* The DMA format for asyncronous link packets is different
+ * from the IEEE1394 layout, so shift the fields around
+ * accordingly. If header_length is 8, it's a PHY packet, to
+ * which we need to prepend an extra quadlet. */
+ if (packet->header_length > 8) {
+ ctx->d.header[0] = cpu_to_le32((packet->header[0] & 0xffff) |
+ (packet->speed << 16));
+ ctx->d.header[1] = cpu_to_le32((packet->header[1] & 0xffff) |
+ (packet->header[0] & 0xffff0000));
+ ctx->d.header[2] = cpu_to_le32(packet->header[2]);
+
+ tcode = (packet->header[0] >> 4) & 0x0f;
+ if (TCODE_IS_BLOCK_PACKET(tcode))
+ ctx->d.header[3] = cpu_to_le32(packet->header[3]);
+ else
+ ctx->d.header[3] = packet->header[3];
+ } else {
+ ctx->d.header[0] =
+ cpu_to_le32((OHCI1394_phy_tcode << 4) |
+ (packet->speed << 16));
+ ctx->d.header[1] = cpu_to_le32(packet->header[0]);
+ ctx->d.header[2] = cpu_to_le32(packet->header[1]);
+ ctx->d.more.req_count = cpu_to_le16(12);
+ }
+
+ /* FIXME: Document how the locking works. */
+ if (ohci->generation == packet->generation) {
+ reg_write(ctx->ohci, ctx->command_ptr,
+ ctx->descriptor_bus | z);
+ reg_write(ctx->ohci, ctx->control_set,
+ CONTEXT_RUN | CONTEXT_WAKE);
+ } else {
+ /* We dont return error codes from this function; all
+ * transmission errors are reported through the
+ * callback. */
+ complete_transmission(packet, -ESTALE, list);
+ }
+}
+
+static void at_context_stop(struct at_context *ctx)
+{
+ u32 reg;
+
+ reg_write(ctx->ohci, ctx->control_clear, CONTEXT_RUN);
+
+ reg = reg_read(ctx->ohci, ctx->control_set);
+ if (reg & CONTEXT_ACTIVE)
+ fw_notify("Tried to stop context, but it is still active "
+ "(0x%08x).\n", reg);
+}
+
+static void at_context_tasklet(unsigned long data)
+{
+ struct at_context *ctx = (struct at_context *)data;
+ struct fw_ohci *ohci = ctx->ohci;
+ struct fw_packet *packet;
+ LIST_HEAD(list);
+ unsigned long flags;
+ int evt;
+
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ packet = fw_packet(ctx->list.next);
+
+ at_context_stop(ctx);
+
+ if (packet->payload_length > 0) {
+ dma_unmap_single(ohci->card.device, packet->payload_bus,
+ packet->payload_length, DMA_TO_DEVICE);
+ evt = le16_to_cpu(ctx->d.last.transfer_status) & 0x1f;
+ packet->timestamp = le16_to_cpu(ctx->d.last.res_count);
+ }
+ else {
+ evt = le16_to_cpu(ctx->d.more.transfer_status) & 0x1f;
+ packet->timestamp = le16_to_cpu(ctx->d.more.res_count);
+ }
+
+ if (evt < 16) {
+ switch (evt) {
+ case OHCI1394_evt_timeout:
+ /* Async response transmit timed out. */
+ complete_transmission(packet, -ETIMEDOUT, &list);
+ break;
+
+ case OHCI1394_evt_flushed:
+ /* The packet was flushed should give same
+ * error as when we try to use a stale
+ * generation count. */
+ complete_transmission(packet, -ESTALE, &list);
+ break;
+
+ case OHCI1394_evt_missing_ack:
+ /* This would be a higher level software
+ * error, it is using a valid (current)
+ * generation count, but the node is not on
+ * the bus. */
+ complete_transmission(packet, -ENODEV, &list);
+ break;
+
+ default:
+ complete_transmission(packet, -EIO, &list);
+ break;
+ }
+ } else
+ complete_transmission(packet, evt - 16, &list);
+
+ /* If more packets are queued, set up the next one. */
+ if (!list_empty(&ctx->list))
+ at_context_setup_packet(ctx, &list);
+
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ do_packet_callbacks(ohci, &list);
+}
+
+static int
+at_context_init(struct at_context *ctx, struct fw_ohci *ohci, u32 control_set)
+{
+ INIT_LIST_HEAD(&ctx->list);
+
+ ctx->descriptor_bus =
+ dma_map_single(ohci->card.device, &ctx->d,
+ sizeof ctx->d, DMA_TO_DEVICE);
+ if (ctx->descriptor_bus == 0)
+ return -ENOMEM;
+
+ ctx->control_set = control_set;
+ ctx->control_clear = control_set + 4;
+ ctx->command_ptr = control_set + 12;
+ ctx->ohci = ohci;
+
+ tasklet_init(&ctx->tasklet, at_context_tasklet, (unsigned long)ctx);
+
+ return 0;
+}
+
+static void
+at_context_transmit(struct at_context *ctx, struct fw_packet *packet)
+{
+ LIST_HEAD(list);
+ unsigned long flags;
+ int was_empty;
+
+ spin_lock_irqsave(&ctx->ohci->lock, flags);
+
+ was_empty = list_empty(&ctx->list);
+ list_add_tail(&packet->link, &ctx->list);
+ if (was_empty)
+ at_context_setup_packet(ctx, &list);
+
+ spin_unlock_irqrestore(&ctx->ohci->lock, flags);
+
+ do_packet_callbacks(ctx->ohci, &list);
+}
+
+static void bus_reset_tasklet(unsigned long data)
+{
+ struct fw_ohci *ohci = (struct fw_ohci *)data;
+ int self_id_count, i, j, reg, node_id;
+ int generation, new_generation;
+ unsigned long flags;
+
+ reg = reg_read(ohci, OHCI1394_NodeID);
+ if (!(reg & OHCI1394_NodeID_idValid)) {
+ fw_error("node ID not valid, new bus reset in progress\n");
+ return;
+ }
+ node_id = reg & 0xffff;
+
+ /* The count in the SelfIDCount register is the number of
+ * bytes in the self ID receive buffer. Since we also receive
+ * the inverted quadlets and a header quadlet, we shift one
+ * bit extra to get the actual number of self IDs. */
+
+ self_id_count = (reg_read(ohci, OHCI1394_SelfIDCount) >> 3) & 0x3ff;
+ generation = (le32_to_cpu(ohci->self_id_cpu[0]) >> 16) & 0xff;
+
+ for (i = 1, j = 0; j < self_id_count; i += 2, j++) {
+ if (ohci->self_id_cpu[i] != ~ohci->self_id_cpu[i + 1])
+ fw_error("inconsistent self IDs\n");
+ ohci->self_id_buffer[j] = le32_to_cpu(ohci->self_id_cpu[i]);
+ }
+
+ /* Check the consistency of the self IDs we just read. The
+ * problem we face is that a new bus reset can start while we
+ * read out the self IDs from the DMA buffer. If this happens,
+ * the DMA buffer will be overwritten with new self IDs and we
+ * will read out inconsistent data. The OHCI specification
+ * (section 11.2) recommends a technique similar to
+ * linux/seqlock.h, where we remember the generation of the
+ * self IDs in the buffer before reading them out and compare
+ * it to the current generation after reading them out. If
+ * the two generations match we know we have a consistent set
+ * of self IDs. */
+
+ new_generation = (reg_read(ohci, OHCI1394_SelfIDCount) >> 16) & 0xff;
+ if (new_generation != generation) {
+ fw_notify("recursive bus reset detected, "
+ "discarding self ids\n");
+ return;
+ }
+
+ /* FIXME: Document how the locking works. */
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ ohci->generation = generation;
+ at_context_stop(&ohci->at_request_ctx);
+ at_context_stop(&ohci->at_response_ctx);
+ reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset);
+
+ /* This next bit is unrelated to the AT context stuff but we
+ * have to do it under the spinlock also. If a new config rom
+ * was set up before this reset, the old one is now no longer
+ * in use and we can free it. Update the config rom pointers
+ * to point to the current config rom and clear the
+ * next_config_rom pointer so a new udpate can take place. */
+
+ if (ohci->next_config_rom != NULL) {
+ dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ ohci->config_rom, ohci->config_rom_bus);
+ ohci->config_rom = ohci->next_config_rom;
+ ohci->config_rom_bus = ohci->next_config_rom_bus;
+ ohci->next_config_rom = NULL;
+
+ /* Restore config_rom image and manually update
+ * config_rom registers. Writing the header quadlet
+ * will indicate that the config rom is ready, so we
+ * do that last. */
+ reg_write(ohci, OHCI1394_BusOptions,
+ be32_to_cpu(ohci->config_rom[2]));
+ ohci->config_rom[0] = cpu_to_be32(ohci->next_header);
+ reg_write(ohci, OHCI1394_ConfigROMhdr, ohci->next_header);
+ }
+
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ fw_core_handle_bus_reset(&ohci->card, node_id, generation,
+ self_id_count, ohci->self_id_buffer);
+}
+
+static irqreturn_t irq_handler(int irq, void *data)
+{
+ struct fw_ohci *ohci = data;
+ u32 event, iso_event;
+ int i;
+
+ event = reg_read(ohci, OHCI1394_IntEventClear);
+
+ if (!event)
+ return IRQ_NONE;
+
+ reg_write(ohci, OHCI1394_IntEventClear, event);
+
+ if (event & OHCI1394_selfIDComplete)
+ tasklet_schedule(&ohci->bus_reset_tasklet);
+
+ if (event & OHCI1394_RQPkt)
+ tasklet_schedule(&ohci->ar_request_ctx.tasklet);
+
+ if (event & OHCI1394_RSPkt)
+ tasklet_schedule(&ohci->ar_response_ctx.tasklet);
+
+ if (event & OHCI1394_reqTxComplete)
+ tasklet_schedule(&ohci->at_request_ctx.tasklet);
+
+ if (event & OHCI1394_respTxComplete)
+ tasklet_schedule(&ohci->at_response_ctx.tasklet);
+
+ iso_event = reg_read(ohci, OHCI1394_IsoRecvIntEventSet);
+ reg_write(ohci, OHCI1394_IsoRecvIntEventClear, iso_event);
+
+ while (iso_event) {
+ i = ffs(iso_event) - 1;
+ tasklet_schedule(&ohci->ir_context_list[i].tasklet);
+ iso_event &= ~(1 << i);
+ }
+
+ iso_event = reg_read(ohci, OHCI1394_IsoXmitIntEventSet);
+ reg_write(ohci, OHCI1394_IsoXmitIntEventClear, iso_event);
+
+ while (iso_event) {
+ i = ffs(iso_event) - 1;
+ tasklet_schedule(&ohci->it_context_list[i].tasklet);
+ iso_event &= ~(1 << i);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ struct pci_dev *dev = to_pci_dev(card->device);
+
+ /* When the link is not yet enabled, the atomic config rom
+ * update mechanism described below in ohci_set_config_rom()
+ * is not active. We have to update ConfigRomHeader and
+ * BusOptions manually, and the write to ConfigROMmap takes
+ * effect immediately. We tie this to the enabling of the
+ * link, so we have a valid config rom before enabling - the
+ * OHCI requires that ConfigROMhdr and BusOptions have valid
+ * values before enabling.
+ *
+ * However, when the ConfigROMmap is written, some controllers
+ * always read back quadlets 0 and 2 from the config rom to
+ * the ConfigRomHeader and BusOptions registers on bus reset.
+ * They shouldn't do that in this initial case where the link
+ * isn't enabled. This means we have to use the same
+ * workaround here, setting the bus header to 0 and then write
+ * the right values in the bus reset tasklet.
+ */
+
+ ohci->next_config_rom =
+ dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ &ohci->next_config_rom_bus, GFP_KERNEL);
+ if (ohci->next_config_rom == NULL)
+ return -ENOMEM;
+
+ memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE);
+ fw_memcpy_to_be32(ohci->next_config_rom, config_rom, length * 4);
+
+ ohci->next_header = config_rom[0];
+ ohci->next_config_rom[0] = 0;
+ reg_write(ohci, OHCI1394_ConfigROMhdr, 0);
+ reg_write(ohci, OHCI1394_BusOptions, config_rom[2]);
+ reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus);
+
+ reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
+
+ if (request_irq(dev->irq, irq_handler,
+ SA_SHIRQ, ohci_driver_name, ohci)) {
+ fw_error("Failed to allocate shared interrupt %d.\n",
+ dev->irq);
+ dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ ohci->config_rom, ohci->config_rom_bus);
+ return -EIO;
+ }
+
+ reg_write(ohci, OHCI1394_HCControlSet,
+ OHCI1394_HCControl_linkEnable |
+ OHCI1394_HCControl_BIBimageValid);
+ flush_writes(ohci);
+
+ /* We are ready to go, initiate bus reset to finish the
+ * initialization. */
+
+ fw_core_initiate_bus_reset(&ohci->card, 1);
+
+ return 0;
+}
+
+static int
+ohci_set_config_rom(struct fw_card *card, u32 *config_rom, size_t length)
+{
+ struct fw_ohci *ohci;
+ unsigned long flags;
+ int retval = 0;
+ __be32 *next_config_rom;
+ dma_addr_t next_config_rom_bus;
+
+ ohci = fw_ohci(card);
+
+ /* When the OHCI controller is enabled, the config rom update
+ * mechanism is a bit tricky, but easy enough to use. See
+ * section 5.5.6 in the OHCI specification.
+ *
+ * The OHCI controller caches the new config rom address in a
+ * shadow register (ConfigROMmapNext) and needs a bus reset
+ * for the changes to take place. When the bus reset is
+ * detected, the controller loads the new values for the
+ * ConfigRomHeader and BusOptions registers from the specified
+ * config rom and loads ConfigROMmap from the ConfigROMmapNext
+ * shadow register. All automatically and atomically.
+ *
+ * Now, there's a twist to this story. The automatic load of
+ * ConfigRomHeader and BusOptions doesn't honor the
+ * noByteSwapData bit, so with a be32 config rom, the
+ * controller will load be32 values in to these registers
+ * during the atomic update, even on litte endian
+ * architectures. The workaround we use is to put a 0 in the
+ * header quadlet; 0 is endian agnostic and means that the
+ * config rom isn't ready yet. In the bus reset tasklet we
+ * then set up the real values for the two registers.
+ *
+ * We use ohci->lock to avoid racing with the code that sets
+ * ohci->next_config_rom to NULL (see bus_reset_tasklet).
+ */
+
+ next_config_rom =
+ dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ &next_config_rom_bus, GFP_KERNEL);
+ if (next_config_rom == NULL)
+ return -ENOMEM;
+
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ if (ohci->next_config_rom == NULL) {
+ ohci->next_config_rom = next_config_rom;
+ ohci->next_config_rom_bus = next_config_rom_bus;
+
+ memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE);
+ fw_memcpy_to_be32(ohci->next_config_rom, config_rom,
+ length * 4);
+
+ ohci->next_header = config_rom[0];
+ ohci->next_config_rom[0] = 0;
+
+ reg_write(ohci, OHCI1394_ConfigROMmap,
+ ohci->next_config_rom_bus);
+ } else {
+ dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ next_config_rom, next_config_rom_bus);
+ retval = -EBUSY;
+ }
+
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ /* Now initiate a bus reset to have the changes take
+ * effect. We clean up the old config rom memory and DMA
+ * mappings in the bus reset tasklet, since the OHCI
+ * controller could need to access it before the bus reset
+ * takes effect. */
+ if (retval == 0)
+ fw_core_initiate_bus_reset(&ohci->card, 1);
+
+ return retval;
+}
+
+static void ohci_send_request(struct fw_card *card, struct fw_packet *packet)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+
+ at_context_transmit(&ohci->at_request_ctx, packet);
+}
+
+static void ohci_send_response(struct fw_card *card, struct fw_packet *packet)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+
+ at_context_transmit(&ohci->at_response_ctx, packet);
+}
+
+static int
+ohci_enable_phys_dma(struct fw_card *card, int node_id, int generation)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ unsigned long flags;
+ int retval = 0;
+
+ /* FIXME: make sure this bitmask is cleared when we clear the
+ * busReset interrupt bit. */
+
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ if (ohci->generation != generation) {
+ retval = -ESTALE;
+ goto out;
+ }
+
+ if (node_id < 32) {
+ reg_write(ohci, OHCI1394_PhyReqFilterLoSet, 1 << node_id);
+ } else {
+ reg_write(ohci, OHCI1394_PhyReqFilterHiSet,
+ 1 << (node_id - 32));
+ }
+ flush_writes(ohci);
+
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ out:
+ return retval;
+}
+
+static void ir_context_tasklet(unsigned long data)
+{
+ struct iso_context *ctx = (struct iso_context *)data;
+
+ (void)ctx;
+}
+
+#define ISO_BUFFER_SIZE (64 * 1024)
+
+static void flush_iso_context(struct iso_context *ctx)
+{
+ struct fw_ohci *ohci = fw_ohci(ctx->base.card);
+ struct descriptor *d, *last;
+ u32 address;
+ int z;
+
+ dma_sync_single_for_cpu(ohci->card.device, ctx->buffer_bus,
+ ISO_BUFFER_SIZE, DMA_TO_DEVICE);
+
+ d = ctx->tail_descriptor;
+ last = ctx->tail_descriptor_last;
+
+ while (last->branch_address != 0 && last->transfer_status != 0) {
+ address = le32_to_cpu(last->branch_address);
+ z = address & 0xf;
+ d = ctx->buffer + (address - ctx->buffer_bus) / sizeof *d;
+
+ if (z == 2)
+ last = d;
+ else
+ last = d + z - 1;
+
+ if (le16_to_cpu(last->control) & descriptor_irq_always)
+ ctx->base.callback(&ctx->base,
+ 0, le16_to_cpu(last->res_count),
+ ctx->base.callback_data);
+ }
+
+ ctx->tail_descriptor = d;
+ ctx->tail_descriptor_last = last;
+}
+
+static void it_context_tasklet(unsigned long data)
+{
+ struct iso_context *ctx = (struct iso_context *)data;
+
+ flush_iso_context(ctx);
+}
+
+static struct fw_iso_context *ohci_allocate_iso_context(struct fw_card *card,
+ int type)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ struct iso_context *ctx, *list;
+ void (*tasklet) (unsigned long data);
+ u32 *mask;
+ unsigned long flags;
+ int index;
+
+ if (type == FW_ISO_CONTEXT_TRANSMIT) {
+ mask = &ohci->it_context_mask;
+ list = ohci->it_context_list;
+ tasklet = it_context_tasklet;
+ } else {
+ mask = &ohci->ir_context_mask;
+ list = ohci->ir_context_list;
+ tasklet = ir_context_tasklet;
+ }
+
+ spin_lock_irqsave(&ohci->lock, flags);
+ index = ffs(*mask) - 1;
+ if (index >= 0)
+ *mask &= ~(1 << index);
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ if (index < 0)
+ return ERR_PTR(-EBUSY);
+
+ ctx = &list[index];
+ memset(ctx, 0, sizeof *ctx);
+ tasklet_init(&ctx->tasklet, tasklet, (unsigned long)ctx);
+
+ ctx->buffer = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL);
+ if (ctx->buffer == NULL) {
+ spin_lock_irqsave(&ohci->lock, flags);
+ *mask |= 1 << index;
+ spin_unlock_irqrestore(&ohci->lock, flags);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ ctx->buffer_bus =
+ dma_map_single(card->device, ctx->buffer,
+ ISO_BUFFER_SIZE, DMA_TO_DEVICE);
+
+ ctx->head_descriptor = ctx->buffer;
+ ctx->prev_descriptor = ctx->buffer;
+ ctx->tail_descriptor = ctx->buffer;
+ ctx->tail_descriptor_last = ctx->buffer;
+
+ /* We put a dummy descriptor in the buffer that has a NULL
+ * branch address and looks like it's been sent. That way we
+ * have a descriptor to append DMA programs to. Also, the
+ * ring buffer invariant is that it always has at least one
+ * element so that head == tail means buffer full. */
+
+ memset(ctx->head_descriptor, 0, sizeof *ctx->head_descriptor);
+ ctx->head_descriptor->control =
+ cpu_to_le16(descriptor_output_last);
+ ctx->head_descriptor->transfer_status = cpu_to_le16(0x8011);
+ ctx->head_descriptor++;
+
+ return &ctx->base;
+}
+
+static int ohci_send_iso(struct fw_iso_context *base, s32 cycle)
+{
+ struct iso_context *ctx = (struct iso_context *)base;
+ struct fw_ohci *ohci = fw_ohci(ctx->base.card);
+ u32 cycle_match = 0;
+ int index;
+
+ index = ctx - ohci->it_context_list;
+ if (cycle > 0)
+ cycle_match = CONTEXT_CYCLE_MATCH_ENABLE |
+ (cycle & 0x7fff) << 16;
+
+ reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << index);
+ reg_write(ohci, OHCI1394_IsoXmitCommandPtr(index),
+ le32_to_cpu(ctx->tail_descriptor_last->branch_address));
+ reg_write(ohci, OHCI1394_IsoXmitContextControlClear(index), ~0);
+ reg_write(ohci, OHCI1394_IsoXmitContextControlSet(index),
+ CONTEXT_RUN | cycle_match);
+ flush_writes(ohci);
+
+ return 0;
+}
+
+static void ohci_free_iso_context(struct fw_iso_context *base)
+{
+ struct fw_ohci *ohci = fw_ohci(base->card);
+ struct iso_context *ctx = (struct iso_context *)base;
+ unsigned long flags;
+ int index;
+
+ flush_iso_context(ctx);
+
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ if (ctx->base.type == FW_ISO_CONTEXT_TRANSMIT) {
+ index = ctx - ohci->it_context_list;
+ reg_write(ohci, OHCI1394_IsoXmitContextControlClear(index), ~0);
+ reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 1 << index);
+ ohci->it_context_mask |= 1 << index;
+ } else {
+ index = ctx - ohci->ir_context_list;
+ reg_write(ohci, OHCI1394_IsoRcvContextControlClear(index), ~0);
+ reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 1 << index);
+ ohci->ir_context_mask |= 1 << index;
+ }
+ flush_writes(ohci);
+
+ dma_unmap_single(ohci->card.device, ctx->buffer_bus,
+ ISO_BUFFER_SIZE, DMA_TO_DEVICE);
+
+ spin_unlock_irqrestore(&ohci->lock, flags);
+}
+
+static int
+ohci_queue_iso(struct fw_iso_context *base,
+ struct fw_iso_packet *packet, void *payload)
+{
+ struct iso_context *ctx = (struct iso_context *)base;
+ struct fw_ohci *ohci = fw_ohci(ctx->base.card);
+ struct descriptor *d, *end, *last, *tail, *pd;
+ struct fw_iso_packet *p;
+ __le32 *header;
+ dma_addr_t d_bus;
+ u32 z, header_z, payload_z, irq;
+ u32 payload_index, payload_end_index, next_page_index;
+ int index, page, end_page, i, length, offset;
+
+ /* FIXME: Cycle lost behavior should be configurable: lose
+ * packet, retransmit or terminate.. */
+
+ p = packet;
+ payload_index = payload - ctx->base.buffer;
+ d = ctx->head_descriptor;
+ tail = ctx->tail_descriptor;
+ end = ctx->buffer + ISO_BUFFER_SIZE / sizeof(struct descriptor);
+
+ if (p->skip)
+ z = 1;
+ else
+ z = 2;
+ if (p->header_length > 0)
+ z++;
+
+ /* Determine the first page the payload isn't contained in. */
+ end_page = PAGE_ALIGN(payload_index + p->payload_length) >> PAGE_SHIFT;
+ if (p->payload_length > 0)
+ payload_z = end_page - (payload_index >> PAGE_SHIFT);
+ else
+ payload_z = 0;
+
+ z += payload_z;
+
+ /* Get header size in number of descriptors. */
+ header_z = DIV_ROUND_UP(p->header_length, sizeof *d);
+
+ if (d + z + header_z <= tail) {
+ goto has_space;
+ } else if (d > tail && d + z + header_z <= end) {
+ goto has_space;
+ } else if (d > tail && ctx->buffer + z + header_z <= tail) {
+ d = ctx->buffer;
+ goto has_space;
+ }
+
+ /* No space in buffer */
+ return -1;
+
+ has_space:
+ memset(d, 0, (z + header_z) * sizeof *d);
+ d_bus = ctx->buffer_bus + (d - ctx->buffer) * sizeof *d;
+
+ if (!p->skip) {
+ d[0].control = cpu_to_le16(descriptor_key_immediate);
+ d[0].req_count = cpu_to_le16(8);
+
+ header = (__le32 *) &d[1];
+ header[0] = cpu_to_le32(it_header_sy(p->sy) |
+ it_header_tag(p->tag) |
+ it_header_tcode(TCODE_STREAM_DATA) |
+ it_header_channel(ctx->base.channel) |
+ it_header_speed(ctx->base.speed));
+ header[1] =
+ cpu_to_le32(it_header_data_length(p->header_length +
+ p->payload_length));
+ }
+
+ if (p->header_length > 0) {
+ d[2].req_count = cpu_to_le16(p->header_length);
+ d[2].data_address = cpu_to_le32(d_bus + z * sizeof *d);
+ memcpy(&d[z], p->header, p->header_length);
+ }
+
+ pd = d + z - payload_z;
+ payload_end_index = payload_index + p->payload_length;
+ for (i = 0; i < payload_z; i++) {
+ page = payload_index >> PAGE_SHIFT;
+ offset = payload_index & ~PAGE_MASK;
+ next_page_index = (page + 1) << PAGE_SHIFT;
+ length =
+ min(next_page_index, payload_end_index) - payload_index;
+ pd[i].req_count = cpu_to_le16(length);
+ pd[i].data_address = cpu_to_le32(ctx->base.pages[page] + offset);
+
+ payload_index += length;
+ }
+
+ if (z == 2)
+ last = d;
+ else
+ last = d + z - 1;
+
+ if (p->interrupt)
+ irq = descriptor_irq_always;
+ else
+ irq = descriptor_no_irq;
+
+ last->control = cpu_to_le16(descriptor_output_last |
+ descriptor_status |
+ descriptor_branch_always |
+ irq);
+
+ dma_sync_single_for_device(ohci->card.device, ctx->buffer_bus,
+ ISO_BUFFER_SIZE, DMA_TO_DEVICE);
+
+ ctx->head_descriptor = d + z + header_z;
+ ctx->prev_descriptor->branch_address = cpu_to_le32(d_bus | z);
+ ctx->prev_descriptor = last;
+
+ index = ctx - ohci->it_context_list;
+ reg_write(ohci, OHCI1394_IsoXmitContextControlSet(index), CONTEXT_WAKE);
+ flush_writes(ohci);
+
+ return 0;
+}
+
+static struct fw_card_driver ohci_driver = {
+ .name = ohci_driver_name,
+ .enable = ohci_enable,
+ .update_phy_reg = ohci_update_phy_reg,
+ .set_config_rom = ohci_set_config_rom,
+ .send_request = ohci_send_request,
+ .send_response = ohci_send_response,
+ .enable_phys_dma = ohci_enable_phys_dma,
+
+ .allocate_iso_context = ohci_allocate_iso_context,
+ .free_iso_context = ohci_free_iso_context,
+ .queue_iso = ohci_queue_iso,
+ .send_iso = ohci_send_iso
+};
+
+static int software_reset(struct fw_ohci *ohci)
+{
+ int i;
+
+ reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
+
+ for (i = 0; i < OHCI_LOOP_COUNT; i++) {
+ if ((reg_read(ohci, OHCI1394_HCControlSet) &
+ OHCI1394_HCControl_softReset) == 0)
+ return 0;
+ msleep(1);
+ }
+
+ return -EBUSY;
+}
+
+/* ---------- pci subsystem interface ---------- */
+
+enum {
+ CLEANUP_SELF_ID,
+ CLEANUP_REGISTERS,
+ CLEANUP_IOMEM,
+ CLEANUP_DISABLE,
+ CLEANUP_PUT_CARD,
+};
+
+static int cleanup(struct fw_ohci *ohci, int stage, int code)
+{
+ struct pci_dev *dev = to_pci_dev(ohci->card.device);
+
+ switch (stage) {
+ case CLEANUP_SELF_ID:
+ dma_free_coherent(ohci->card.device, SELF_ID_BUF_SIZE,
+ ohci->self_id_cpu, ohci->self_id_bus);
+ case CLEANUP_REGISTERS:
+ kfree(ohci->it_context_list);
+ kfree(ohci->ir_context_list);
+ pci_iounmap(dev, ohci->registers);
+ case CLEANUP_IOMEM:
+ pci_release_region(dev, 0);
+ case CLEANUP_DISABLE:
+ pci_disable_device(dev);
+ case CLEANUP_PUT_CARD:
+ fw_card_put(&ohci->card);
+ }
+
+ return code;
+}
+
+static int __devinit
+pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+ struct fw_ohci *ohci;
+ u32 bus_options, max_receive, link_speed;
+ u64 guid;
+ int error_code;
+ size_t size;
+
+ ohci = kzalloc(sizeof *ohci, GFP_KERNEL);
+ if (ohci == NULL) {
+ fw_error("Could not malloc fw_ohci data.\n");
+ return -ENOMEM;
+ }
+
+ fw_card_initialize(&ohci->card, &ohci_driver, &dev->dev);
+
+ if (pci_enable_device(dev)) {
+ fw_error("Failed to enable OHCI hardware.\n");
+ return cleanup(ohci, CLEANUP_PUT_CARD, -ENODEV);
+ }
+
+ pci_set_master(dev);
+ pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0);
+ pci_set_drvdata(dev, ohci);
+
+ spin_lock_init(&ohci->lock);
+
+ tasklet_init(&ohci->bus_reset_tasklet,
+ bus_reset_tasklet, (unsigned long)ohci);
+
+ if (pci_request_region(dev, 0, ohci_driver_name)) {
+ fw_error("MMIO resource unavailable\n");
+ return cleanup(ohci, CLEANUP_DISABLE, -EBUSY);
+ }
+
+ ohci->registers = pci_iomap(dev, 0, OHCI1394_REGISTER_SIZE);
+ if (ohci->registers == NULL) {
+ fw_error("Failed to remap registers\n");
+ return cleanup(ohci, CLEANUP_IOMEM, -ENXIO);
+ }
+
+ if (software_reset(ohci)) {
+ fw_error("Failed to reset ohci card.\n");
+ return cleanup(ohci, CLEANUP_REGISTERS, -EBUSY);
+ }
+
+ /* Now enable LPS, which we need in order to start accessing
+ * most of the registers. In fact, on some cards (ALI M5251),
+ * accessing registers in the SClk domain without LPS enabled
+ * will lock up the machine. Wait 50msec to make sure we have
+ * full link enabled. */
+ reg_write(ohci, OHCI1394_HCControlSet,
+ OHCI1394_HCControl_LPS |
+ OHCI1394_HCControl_postedWriteEnable);
+ flush_writes(ohci);
+ msleep(50);
+
+ reg_write(ohci, OHCI1394_HCControlClear,
+ OHCI1394_HCControl_noByteSwapData);
+
+ reg_write(ohci, OHCI1394_LinkControlSet,
+ OHCI1394_LinkControl_rcvSelfID |
+ OHCI1394_LinkControl_cycleTimerEnable |
+ OHCI1394_LinkControl_cycleMaster);
+
+ ar_context_init(&ohci->ar_request_ctx, ohci,
+ OHCI1394_AsReqRcvContextControlSet);
+
+ ar_context_init(&ohci->ar_response_ctx, ohci,
+ OHCI1394_AsRspRcvContextControlSet);
+
+ at_context_init(&ohci->at_request_ctx, ohci,
+ OHCI1394_AsReqTrContextControlSet);
+
+ at_context_init(&ohci->at_response_ctx, ohci,
+ OHCI1394_AsRspTrContextControlSet);
+
+ reg_write(ohci, OHCI1394_ATRetries,
+ OHCI1394_MAX_AT_REQ_RETRIES |
+ (OHCI1394_MAX_AT_RESP_RETRIES << 4) |
+ (OHCI1394_MAX_PHYS_RESP_RETRIES << 8));
+
+ reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, ~0);
+ ohci->it_context_mask = reg_read(ohci, OHCI1394_IsoRecvIntMaskSet);
+ reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, ~0);
+ size = sizeof(struct iso_context) * hweight32(ohci->it_context_mask);
+ ohci->it_context_list = kzalloc(size, GFP_KERNEL);
+
+ reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, ~0);
+ ohci->ir_context_mask = reg_read(ohci, OHCI1394_IsoXmitIntMaskSet);
+ reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, ~0);
+ size = sizeof(struct iso_context) * hweight32(ohci->ir_context_mask);
+ ohci->ir_context_list = kzalloc(size, GFP_KERNEL);
+
+ if (ohci->it_context_list == NULL || ohci->ir_context_list == NULL) {
+ fw_error("Out of memory for it/ir contexts.\n");
+ return cleanup(ohci, CLEANUP_REGISTERS, -ENOMEM);
+ }
+
+ /* self-id dma buffer allocation */
+ ohci->self_id_cpu = dma_alloc_coherent(ohci->card.device,
+ SELF_ID_BUF_SIZE,
+ &ohci->self_id_bus,
+ GFP_KERNEL);
+ if (ohci->self_id_cpu == NULL) {
+ fw_error("Out of memory for self ID buffer.\n");
+ return cleanup(ohci, CLEANUP_REGISTERS, -ENOMEM);
+ }
+
+ reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
+ reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
+ reg_write(ohci, OHCI1394_IntEventClear, ~0);
+ reg_write(ohci, OHCI1394_IntMaskClear, ~0);
+ reg_write(ohci, OHCI1394_IntMaskSet,
+ OHCI1394_selfIDComplete |
+ OHCI1394_RQPkt | OHCI1394_RSPkt |
+ OHCI1394_reqTxComplete | OHCI1394_respTxComplete |
+ OHCI1394_isochRx | OHCI1394_isochTx |
+ OHCI1394_masterIntEnable);
+
+ bus_options = reg_read(ohci, OHCI1394_BusOptions);
+ max_receive = (bus_options >> 12) & 0xf;
+ link_speed = bus_options & 0x7;
+ guid = ((u64) reg_read(ohci, OHCI1394_GUIDHi) << 32) |
+ reg_read(ohci, OHCI1394_GUIDLo);
+
+ error_code = fw_card_add(&ohci->card, max_receive, link_speed, guid);
+ if (error_code < 0)
+ return cleanup(ohci, CLEANUP_SELF_ID, error_code);
+
+ fw_notify("Added fw-ohci device %s.\n", dev->dev.bus_id);
+
+ return 0;
+}
+
+static void pci_remove(struct pci_dev *dev)
+{
+ struct fw_ohci *ohci;
+
+ ohci = pci_get_drvdata(dev);
+ reg_write(ohci, OHCI1394_IntMaskClear, OHCI1394_masterIntEnable);
+ fw_core_remove_card(&ohci->card);
+
+ /* FIXME: Fail all pending packets here, now that the upper
+ * layers can't queue any more. */
+
+ software_reset(ohci);
+ free_irq(dev->irq, ohci);
+ cleanup(ohci, CLEANUP_SELF_ID, 0);
+
+ fw_notify("Removed fw-ohci device.\n");
+}
+
+static struct pci_device_id pci_table[] = {
+ { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_FIREWIRE_OHCI, ~0) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, pci_table);
+
+static struct pci_driver fw_ohci_pci_driver = {
+ .name = ohci_driver_name,
+ .id_table = pci_table,
+ .probe = pci_probe,
+ .remove = pci_remove,
+};
+
+MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>");
+MODULE_DESCRIPTION("Driver for PCI OHCI IEEE1394 controllers");
+MODULE_LICENSE("GPL");
+
+static int __init fw_ohci_init(void)
+{
+ return pci_register_driver(&fw_ohci_pci_driver);
+}
+
+static void __exit fw_ohci_cleanup(void)
+{
+ pci_unregister_driver(&fw_ohci_pci_driver);
+}
+
+module_init(fw_ohci_init);
+module_exit(fw_ohci_cleanup);
diff --git a/drivers/firewire/fw-ohci.h b/drivers/firewire/fw-ohci.h
new file mode 100644
index 0000000..35e2a75
--- /dev/null
+++ b/drivers/firewire/fw-ohci.h
@@ -0,0 +1,152 @@
+#ifndef __fw_ohci_h
+#define __fw_ohci_h
+
+/* OHCI register map */
+
+#define OHCI1394_Version 0x000
+#define OHCI1394_GUID_ROM 0x004
+#define OHCI1394_ATRetries 0x008
+#define OHCI1394_CSRData 0x00C
+#define OHCI1394_CSRCompareData 0x010
+#define OHCI1394_CSRControl 0x014
+#define OHCI1394_ConfigROMhdr 0x018
+#define OHCI1394_BusID 0x01C
+#define OHCI1394_BusOptions 0x020
+#define OHCI1394_GUIDHi 0x024
+#define OHCI1394_GUIDLo 0x028
+#define OHCI1394_ConfigROMmap 0x034
+#define OHCI1394_PostedWriteAddressLo 0x038
+#define OHCI1394_PostedWriteAddressHi 0x03C
+#define OHCI1394_VendorID 0x040
+#define OHCI1394_HCControlSet 0x050
+#define OHCI1394_HCControlClear 0x054
+#define OHCI1394_HCControl_BIBimageValid 0x80000000
+#define OHCI1394_HCControl_noByteSwapData 0x40000000
+#define OHCI1394_HCControl_programPhyEnable 0x00800000
+#define OHCI1394_HCControl_aPhyEnhanceEnable 0x00400000
+#define OHCI1394_HCControl_LPS 0x00080000
+#define OHCI1394_HCControl_postedWriteEnable 0x00040000
+#define OHCI1394_HCControl_linkEnable 0x00020000
+#define OHCI1394_HCControl_softReset 0x00010000
+#define OHCI1394_SelfIDBuffer 0x064
+#define OHCI1394_SelfIDCount 0x068
+#define OHCI1394_IRMultiChanMaskHiSet 0x070
+#define OHCI1394_IRMultiChanMaskHiClear 0x074
+#define OHCI1394_IRMultiChanMaskLoSet 0x078
+#define OHCI1394_IRMultiChanMaskLoClear 0x07C
+#define OHCI1394_IntEventSet 0x080
+#define OHCI1394_IntEventClear 0x084
+#define OHCI1394_IntMaskSet 0x088
+#define OHCI1394_IntMaskClear 0x08C
+#define OHCI1394_IsoXmitIntEventSet 0x090
+#define OHCI1394_IsoXmitIntEventClear 0x094
+#define OHCI1394_IsoXmitIntMaskSet 0x098
+#define OHCI1394_IsoXmitIntMaskClear 0x09C
+#define OHCI1394_IsoRecvIntEventSet 0x0A0
+#define OHCI1394_IsoRecvIntEventClear 0x0A4
+#define OHCI1394_IsoRecvIntMaskSet 0x0A8
+#define OHCI1394_IsoRecvIntMaskClear 0x0AC
+#define OHCI1394_InitialBandwidthAvailable 0x0B0
+#define OHCI1394_InitialChannelsAvailableHi 0x0B4
+#define OHCI1394_InitialChannelsAvailableLo 0x0B8
+#define OHCI1394_FairnessControl 0x0DC
+#define OHCI1394_LinkControlSet 0x0E0
+#define OHCI1394_LinkControlClear 0x0E4
+#define OHCI1394_LinkControl_rcvSelfID (1 << 9)
+#define OHCI1394_LinkControl_rcvPhyPkt (1 << 10)
+#define OHCI1394_LinkControl_cycleTimerEnable (1 << 20)
+#define OHCI1394_LinkControl_cycleMaster (1 << 21)
+#define OHCI1394_LinkControl_cycleSource (1 << 22)
+#define OHCI1394_NodeID 0x0E8
+#define OHCI1394_NodeID_idValid 0x80000000
+#define OHCI1394_PhyControl 0x0EC
+#define OHCI1394_PhyControl_Read(addr) (((addr) << 8) | 0x00008000)
+#define OHCI1394_PhyControl_ReadDone 0x80000000
+#define OHCI1394_PhyControl_ReadData(r) (((r) & 0x00ff0000) >> 16)
+#define OHCI1394_PhyControl_Write(addr, data) (((addr) << 8) | (data) | 0x00004000)
+#define OHCI1394_PhyControl_WriteDone 0x00004000
+#define OHCI1394_IsochronousCycleTimer 0x0F0
+#define OHCI1394_AsReqFilterHiSet 0x100
+#define OHCI1394_AsReqFilterHiClear 0x104
+#define OHCI1394_AsReqFilterLoSet 0x108
+#define OHCI1394_AsReqFilterLoClear 0x10C
+#define OHCI1394_PhyReqFilterHiSet 0x110
+#define OHCI1394_PhyReqFilterHiClear 0x114
+#define OHCI1394_PhyReqFilterLoSet 0x118
+#define OHCI1394_PhyReqFilterLoClear 0x11C
+#define OHCI1394_PhyUpperBound 0x120
+
+#define OHCI1394_AsReqTrContextBase 0x180
+#define OHCI1394_AsReqTrContextControlSet 0x180
+#define OHCI1394_AsReqTrContextControlClear 0x184
+#define OHCI1394_AsReqTrCommandPtr 0x18C
+
+#define OHCI1394_AsRspTrContextBase 0x1A0
+#define OHCI1394_AsRspTrContextControlSet 0x1A0
+#define OHCI1394_AsRspTrContextControlClear 0x1A4
+#define OHCI1394_AsRspTrCommandPtr 0x1AC
+
+#define OHCI1394_AsReqRcvContextBase 0x1C0
+#define OHCI1394_AsReqRcvContextControlSet 0x1C0
+#define OHCI1394_AsReqRcvContextControlClear 0x1C4
+#define OHCI1394_AsReqRcvCommandPtr 0x1CC
+
+#define OHCI1394_AsRspRcvContextBase 0x1E0
+#define OHCI1394_AsRspRcvContextControlSet 0x1E0
+#define OHCI1394_AsRspRcvContextControlClear 0x1E4
+#define OHCI1394_AsRspRcvCommandPtr 0x1EC
+
+/* Isochronous transmit registers */
+#define OHCI1394_IsoXmitContextBase(n) (0x200 + 16 * (n))
+#define OHCI1394_IsoXmitContextControlSet(n) (0x200 + 16 * (n))
+#define OHCI1394_IsoXmitContextControlClear(n) (0x204 + 16 * (n))
+#define OHCI1394_IsoXmitCommandPtr(n) (0x20C + 16 * (n))
+
+/* Isochronous receive registers */
+#define OHCI1394_IsoRcvContextControlSet(n) (0x400 + 32 * (n))
+#define OHCI1394_IsoRcvContextControlClear(n) (0x404 + 32 * (n))
+#define OHCI1394_IsoRcvCommandPtr(n) (0x40C + 32 * (n))
+#define OHCI1394_IsoRcvContextMatch(n) (0x410 + 32 * (n))
+
+/* Interrupts Mask/Events */
+#define OHCI1394_reqTxComplete 0x00000001
+#define OHCI1394_respTxComplete 0x00000002
+#define OHCI1394_ARRQ 0x00000004
+#define OHCI1394_ARRS 0x00000008
+#define OHCI1394_RQPkt 0x00000010
+#define OHCI1394_RSPkt 0x00000020
+#define OHCI1394_isochTx 0x00000040
+#define OHCI1394_isochRx 0x00000080
+#define OHCI1394_postedWriteErr 0x00000100
+#define OHCI1394_lockRespErr 0x00000200
+#define OHCI1394_selfIDComplete 0x00010000
+#define OHCI1394_busReset 0x00020000
+#define OHCI1394_phy 0x00080000
+#define OHCI1394_cycleSynch 0x00100000
+#define OHCI1394_cycle64Seconds 0x00200000
+#define OHCI1394_cycleLost 0x00400000
+#define OHCI1394_cycleInconsistent 0x00800000
+#define OHCI1394_unrecoverableError 0x01000000
+#define OHCI1394_cycleTooLong 0x02000000
+#define OHCI1394_phyRegRcvd 0x04000000
+#define OHCI1394_masterIntEnable 0x80000000
+
+#define OHCI1394_evt_no_status 0x0
+#define OHCI1394_evt_long_packet 0x2
+#define OHCI1394_evt_missing_ack 0x3
+#define OHCI1394_evt_underrun 0x4
+#define OHCI1394_evt_overrun 0x5
+#define OHCI1394_evt_descriptor_read 0x6
+#define OHCI1394_evt_data_read 0x7
+#define OHCI1394_evt_data_write 0x8
+#define OHCI1394_evt_bus_reset 0x9
+#define OHCI1394_evt_timeout 0xa
+#define OHCI1394_evt_tcode_err 0xb
+#define OHCI1394_evt_reserved_b 0xc
+#define OHCI1394_evt_reserved_c 0xd
+#define OHCI1394_evt_unknown 0xe
+#define OHCI1394_evt_flushed 0xf
+
+#define OHCI1394_phy_tcode 0xe
+
+#endif /* __fw_ohci_h */
--
1.4.2.4
next reply other threads:[~2006-12-20 0:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-20 0:58 Kristian Høgsberg [this message]
[not found] <fa.4xX+iXSBwItlW4ONHWvAYR6m5+c@ifi.uio.no>
2006-12-20 4:20 ` [PATCH 3/4] Add driver for OHCI firewire host controllers Robert Hancock
2006-12-20 8:10 ` Stefan Richter
2006-12-20 18:10 ` Kristian Høgsberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061220005835.GE11746@devserv.devel.redhat.com \
--to=krh@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux1394-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.