From: Mark Gross <mgross@linux.intel.com>
To: linux-kernel@vger.kernel.org
Cc: akpm@osdl.org, mgross@linux.intel.com
Subject: [PATCH] tlclk: bug fix + misc fixes
Date: Thu, 11 Jan 2007 15:34:53 -0800 [thread overview]
Message-ID: <20070111233453.GA25923@linux.intel.com> (raw)
The following patch fixes a few problems with the tlclk driver.
* bug in the select_amcb1_transmit_clock
* racy read sys call
* racy open sys call
* use of add_timer where mod_timer would be better
* change to the timer data parameter use
Signed-off-by: Mark Gross <mark.gross@intel.com>
thanks,
--mgross
diff -urN -X linux-2.6.20-rc2-mm1/Documentation/dontdiff linux-2.6.20-rc2-mm1/drivers/char/tlclk.c linux-2.6.20-rc2-mm1-tlclk/drivers/char/tlclk.c
--- linux-2.6.20-rc2-mm1/drivers/char/tlclk.c 2007-01-03 08:46:18.000000000 -0800
+++ linux-2.6.20-rc2-mm1-tlclk/drivers/char/tlclk.c 2007-01-11 13:37:30.000000000 -0800
@@ -186,6 +186,7 @@
static void switchover_timeout(unsigned long data);
static struct timer_list switchover_timer =
TIMER_INITIALIZER(switchover_timeout , 0, 0);
+static unsigned long tlclk_timer_data;
static struct tlclk_alarms *alarm_events;
@@ -197,10 +198,19 @@
static DECLARE_WAIT_QUEUE_HEAD(wq);
+static unsigned long useflags;
+static DEFINE_MUTEX(tlclk_mutex);
+
static int tlclk_open(struct inode *inode, struct file *filp)
{
int result;
+ if (test_and_set_bit(0, &useflags))
+ return -EBUSY;
+ /* this legacy device is always one per system and it doesn't
+ * know how to handle multiple concurrent clients.
+ */
+
/* Make sure there is no interrupt pending while
* initialising interrupt handler */
inb(TLCLK_REG6);
@@ -221,6 +231,7 @@
static int tlclk_release(struct inode *inode, struct file *filp)
{
free_irq(telclk_interrupt, tlclk_interrupt);
+ useflags &= ~0x1;
return 0;
}
@@ -230,26 +241,25 @@
{
if (count < sizeof(struct tlclk_alarms))
return -EIO;
+ if (mutex_lock_interruptible(&tlclk_mutex))
+ return -EINTR;
+
wait_event_interruptible(wq, got_event);
- if (copy_to_user(buf, alarm_events, sizeof(struct tlclk_alarms)))
+ if (copy_to_user(buf, alarm_events, sizeof(struct tlclk_alarms))) {
+ mutex_unlock(&tlclk_mutex);
return -EFAULT;
+ }
memset(alarm_events, 0, sizeof(struct tlclk_alarms));
got_event = 0;
+ mutex_unlock(&tlclk_mutex);
return sizeof(struct tlclk_alarms);
}
-static ssize_t tlclk_write(struct file *filp, const char __user *buf, size_t count,
- loff_t *f_pos)
-{
- return 0;
-}
-
static const struct file_operations tlclk_fops = {
.read = tlclk_read,
- .write = tlclk_write,
.open = tlclk_open,
.release = tlclk_release,
@@ -540,7 +550,7 @@
SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x7);
switch (val) {
case CLK_8_592MHz:
- SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
break;
case CLK_11_184MHz:
SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
@@ -549,7 +559,7 @@
SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
break;
case CLK_44_736MHz:
- SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
break;
}
} else
@@ -839,11 +849,13 @@
static void switchover_timeout(unsigned long data)
{
- if ((data & 1)) {
- if ((inb(TLCLK_REG1) & 0x08) != (data & 0x08))
+ unsigned long flags = *(unsigned long *) data;
+
+ if ((flags & 1)) {
+ if ((inb(TLCLK_REG1) & 0x08) != (flags & 0x08))
alarm_events->switchover_primary++;
} else {
- if ((inb(TLCLK_REG1) & 0x08) != (data & 0x08))
+ if ((inb(TLCLK_REG1) & 0x08) != (flags & 0x08))
alarm_events->switchover_secondary++;
}
@@ -901,8 +913,9 @@
/* TIMEOUT in ~10ms */
switchover_timer.expires = jiffies + msecs_to_jiffies(10);
- switchover_timer.data = inb(TLCLK_REG1);
- add_timer(&switchover_timer);
+ tlclk_timer_data = inb(TLCLK_REG1);
+ switchover_timer.data = (unsigned long) &tlclk_timer_data;
+ mod_timer(&switchover_timer, switchover_timer.expires);
} else {
got_event = 1;
wake_up(&wq);
reply other threads:[~2007-01-11 23:39 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070111233453.GA25923@linux.intel.com \
--to=mgross@linux.intel.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.