[PATCH 16/19] sis5513: sis5513_config_xfer_rate() cleanup

[Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>]

[PATCH] sis5513: sis5513_config_xfer_rate() cleanup

* remove bogus comment for sis5513_config_xfer_rate()
* there is no need to call config_drive_art_rwp() because
  it is called by config_art_rwp_pio()
* remove needless wrapper
* remove stale "TODO" comment
  (IDE core should provide generic tuning code)

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

---
 drivers/ide/pci/sis5513.c |   41 +++--------------------------------------
 1 file changed, 3 insertions(+), 38 deletions(-)

Index: a/drivers/ide/pci/sis5513.c
===================================================================
--- a.orig/drivers/ide/pci/sis5513.c
+++ a/drivers/ide/pci/sis5513.c
@@ -667,11 +667,13 @@ static int config_chipset_for_dma (ide_d
 	return ide_dma_enable(drive);
 }
 
-static int sis5513_config_drive_xfer_rate (ide_drive_t *drive)
+static int sis5513_config_xfer_rate(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct hd_driveid *id	= drive->id;
 
+	config_art_rwp_pio(drive, 5);
+
 	drive->init_speed = 0;
 
 	if (id && (id->capability & 1) && drive->autodma) {
@@ -692,43 +694,6 @@ fast_ata_pio:
 	return 0;
 }
 
-/* initiates/aborts (U)DMA read/write operations on a drive. */
-static int sis5513_config_xfer_rate (ide_drive_t *drive)
-{
-	config_drive_art_rwp(drive);
-	config_art_rwp_pio(drive, 5);
-	return sis5513_config_drive_xfer_rate(drive);
-}
-
-/*
-  Future simpler config_xfer_rate :
-   When ide_find_best_mode is made bad-drive aware
-   - remove config_drive_xfer_rate and config_chipset_for_dma,
-   - replace config_xfer_rate with the following
-
-static int sis5513_config_xfer_rate (ide_drive_t *drive)
-{
-	u16 w80 = HWIF(drive)->udma_four;
-	u16 speed;
-
-	config_drive_art_rwp(drive);
-	config_art_rwp_pio(drive, 5);
-
-	speed = ide_find_best_mode(drive,
-		XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
-		(chipset_family >= ATA_33 ? XFER_UDMA : 0) |
-		(w80 && chipset_family >= ATA_66 ? XFER_UDMA_66 : 0) |
-		(w80 && chipset_family >= ATA_100a ? XFER_UDMA_100 : 0) |
-		(w80 && chipset_family >= ATA_133a ? XFER_UDMA_133 : 0));
-
-	sis5513_tune_chipset(drive, speed);
-
-	if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
-		return HWIF(drive)->ide_dma_on(drive);
-	return HWIF(drive)->ide_dma_off_quietly(drive);
-}
-*/
-
 /* Chip detection and general config */
 static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const char *name)
 {