All of lore.kernel.org
 help / color / mirror / Atom feed
From: "ris" <ris@elsat.net.pl>
To: linux-kernel@vger.kernel.org
Subject: High CPU usage with sata_nv
Date: Mon, 15 Jan 2007 18:54:50 +0200	[thread overview]
Message-ID: <20070115165432.M87238@elsat.net.pl> (raw)
In-Reply-To: <20070115164541.M22367@elsat.net.pl>

I have motherboard with nforce 590 SLI (MCP55) chipset.
On other systems all its ok.

But i tried a lot o kernels, configurations and always get cpu at 100% when
copying files.
I use SATA II samsung hard drive.

There is my lspci

00:0c.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) (prog-if 8a [Master
 SecP PriP])
        Subsystem: Unknown device f043:8223
        Flags: bus master, 66MHz, fast devsel, latency 0
        I/O ports at f400 [size=16]
        Capabilities: [44] Power Management version 2

00:0d.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) (prog-i
f 85 [Master SecO PriO])
        Subsystem: ASUSTeK Computer Inc. Unknown device 8223
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        I/O ports at 09f0 [size=8]
        I/O ports at 0bf0 [size=4]
        I/O ports at 0970 [size=8]
        I/O ports at 0b70 [size=4]
        I/O ports at e000 [size=16]
        Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2
Enable-
        Capabilities: [cc] HyperTransport: MSI Mapping

00:0d.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) (prog-i
f 85 [Master SecO PriO])
        Subsystem: ASUSTeK Computer Inc. Unknown device 8223
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        I/O ports at 09e0 [size=8]
        I/O ports at 0be0 [size=4]
        I/O ports at 0960 [size=8]
        I/O ports at 0b60 [size=4]
        I/O ports at cc00 [size=16]
        Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2
Enable-
        Capabilities: [cc] HyperTransport: MSI Mapping

00:0d.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) (prog-i
f 85 [Master SecO PriO])
        Subsystem: ASUSTeK Computer Inc. Unknown device 8223
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        I/O ports at c800 [size=8]
        I/O ports at c400 [size=4]
        I/O ports at c000 [size=8]
        I/O ports at bc00 [size=4]
        I/O ports at b800 [size=16]
        Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2
Enable-
        Capabilities: [cc] HyperTransport: MSI Mapping
------- End of Forwarded Message -------




       reply	other threads:[~2007-01-15 17:29 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20070115164541.M22367@elsat.net.pl>
2007-01-15 16:54 ` ris [this message]
2007-01-15 18:26   ` High CPU usage with sata_nv Frederik Deweerdt
2007-01-15 22:28     ` ris
2007-01-22  3:40       ` Tejun Heo
2007-02-11 22:31         ` ris
2007-02-12  6:49           ` Tejun Heo
2007-02-12 14:11             ` ris
2007-02-12 16:18               ` Tejun Heo
2007-02-12 20:02             ` Matthew Fredrickson
2007-02-12 20:09               ` Tejun Heo
     [not found] <fa.1OWRIIUBXsZOXflsGLA+7d4YCc0@ifi.uio.no>
     [not found] ` <fa.A0XBTh7eCfsh11d3AhMO71/4xQU@ifi.uio.no>
     [not found]   ` <fa.fCm35VohC2wt9vlkg94Ru7me4ic@ifi.uio.no>
     [not found]     ` <fa.qDqCne4pXntL0PolSS2j8t4py3g@ifi.uio.no>
     [not found]       ` <fa.8TboLRab6f7zzIWFr/JPM6q04Zo@ifi.uio.no>
     [not found]         ` <fa.PMqnzxUBiShkWV4h9SiztNIwYc0@ifi.uio.no>
2007-02-21  3:43           ` Robert Hancock
2007-02-21 15:28             ` Matthew Fredrickson
2007-02-21 18:04               ` Lee Revell
2007-02-22  2:34               ` Robert Hancock

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070115165432.M87238@elsat.net.pl \
    --to=ris@elsat.net.pl \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.