[U-Boot-Users] U-Boot-1.1.4 using STUART

[kontakt at download-privat.de <kontakt@download-privat.de>]

Hi Charles,

I think the same as you about my problem.Is this problem only on my PXA-based board schematic or is it a PXA problem?

Thank you for your request!


> Dear Kontakt:
> 
> If I recall, there is something slightly unusual about the 
> STUART compared with the FFUART in the PXA. You might look carefully at 
> the hardware differences in the PXA pdf file from Intel and see if you 
> can discern that difference.
> 
> Charles
> 
>> Hi all,
>> 
>> my System is a PXA based board. First i used the FFUart Port for
>> bootmessages from bootloader and i can then display the 
>> kernelbootmessages on FFUART und STUART. 
>> But if i use STUART for Bootloader bootmessages then my Kernel is not
>> starting.
>> 
>> What is the problem with the STUART?
>> 
>> Thank you for you help!

-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer