From: Alexey Dobriyan <adobriyan@openvz.org>
To: akpm@osdl.org
Cc: dev@sw.ru, linux-kernel@vger.kernel.org, devel@openvz.org,
linux-arch@vger.kernel.org
Subject: [PATCH 1/2] Consolidate bust_spinlocks()
Date: Thu, 18 Jan 2007 14:16:26 +0300 [thread overview]
Message-ID: <20070118111626.GA6040@localhost.sw.ru> (raw)
From: Kirill Korotaev <dev@sw.ru>
Part of long forgotten patch
http://groups.google.com/group/fa.linux.kernel/msg/e98e941ce1cf29f6?dmode=source
Since then, m32r grabbed two copies.
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
---
arch/i386/mm/fault.c | 26 --------------------------
arch/ia64/kernel/traps.c | 30 ------------------------------
arch/m32r/mm/fault-nommu.c | 26 --------------------------
arch/m32r/mm/fault.c | 26 --------------------------
arch/s390/mm/fault.c | 26 --------------------------
arch/x86_64/mm/fault.c | 21 ---------------------
lib/Makefile | 4 ++--
lib/bust_spinlocks.c | 2 +-
8 files changed, 3 insertions(+), 158 deletions(-)
--- a/arch/i386/mm/fault.c
+++ b/arch/i386/mm/fault.c
@@ -60,32 +60,6 @@ static inline int notify_page_fault(enum
}
/*
- * Unlock any spinlocks which will prevent us from getting the
- * message out
- */
-void bust_spinlocks(int yes)
-{
- int loglevel_save = console_loglevel;
-
- if (yes) {
- oops_in_progress = 1;
- return;
- }
-#ifdef CONFIG_VT
- unblank_screen();
-#endif
- oops_in_progress = 0;
- /*
- * OK, the message is on the console. Now we call printk()
- * without oops_in_progress set so that printk will give klogd
- * a poke. Hold onto your hats...
- */
- console_loglevel = 15; /* NMI oopser may have shut the console up */
- printk(" ");
- console_loglevel = loglevel_save;
-}
-
-/*
* Return EIP plus the CS segment base. The segment limit is also
* adjusted, clamped to the kernel/user address space (whichever is
* appropriate), and returned in *eip_limit.
--- a/arch/ia64/kernel/traps.c
+++ b/arch/ia64/kernel/traps.c
@@ -24,8 +24,6 @@ #include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/kdebug.h>
-extern spinlock_t timerlist_lock;
-
fpswa_interface_t *fpswa_interface;
EXPORT_SYMBOL(fpswa_interface);
@@ -53,34 +51,6 @@ trap_init (void)
fpswa_interface = __va(ia64_boot_param->fpswa);
}
-/*
- * Unlock any spinlocks which will prevent us from getting the message out (timerlist_lock
- * is acquired through the console unblank code)
- */
-void
-bust_spinlocks (int yes)
-{
- int loglevel_save = console_loglevel;
-
- if (yes) {
- oops_in_progress = 1;
- return;
- }
-
-#ifdef CONFIG_VT
- unblank_screen();
-#endif
- oops_in_progress = 0;
- /*
- * OK, the message is on the console. Now we call printk() without
- * oops_in_progress set so that printk will give klogd a poke. Hold onto
- * your hats...
- */
- console_loglevel = 15; /* NMI oopser may have shut the console up */
- printk(" ");
- console_loglevel = loglevel_save;
-}
-
void
die (const char *str, struct pt_regs *regs, long err)
{
--- a/arch/m32r/mm/fault-nommu.c
+++ b/arch/m32r/mm/fault-nommu.c
@@ -46,32 +46,6 @@ #define tlb_entry_i tlb_entry_i_dat[smp_
#define tlb_entry_d tlb_entry_d_dat[smp_processor_id()]
#endif
-/*
- * Unlock any spinlocks which will prevent us from getting the
- * message out
- */
-void bust_spinlocks(int yes)
-{
- int loglevel_save = console_loglevel;
-
- if (yes) {
- oops_in_progress = 1;
- return;
- }
-#ifdef CONFIG_VT
- unblank_screen();
-#endif
- oops_in_progress = 0;
- /*
- * OK, the message is on the console. Now we call printk()
- * without oops_in_progress set so that printk will give klogd
- * a poke. Hold onto your hats...
- */
- console_loglevel = 15; /* NMI oopser may have shut the console up */
- printk(" ");
- console_loglevel = loglevel_save;
-}
-
void do_BUG(const char *file, int line)
{
bust_spinlocks(1);
--- a/arch/m32r/mm/fault.c
+++ b/arch/m32r/mm/fault.c
@@ -49,32 +49,6 @@ #endif
extern void init_tlb(void);
-/*
- * Unlock any spinlocks which will prevent us from getting the
- * message out
- */
-void bust_spinlocks(int yes)
-{
- int loglevel_save = console_loglevel;
-
- if (yes) {
- oops_in_progress = 1;
- return;
- }
-#ifdef CONFIG_VT
- unblank_screen();
-#endif
- oops_in_progress = 0;
- /*
- * OK, the message is on the console. Now we call printk()
- * without oops_in_progress set so that printk will give klogd
- * a poke. Hold onto your hats...
- */
- console_loglevel = 15; /* NMI oopser may have shut the console up */
- printk(" ");
- console_loglevel = loglevel_save;
-}
-
/*======================================================================*
* do_page_fault()
*======================================================================*
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -83,32 +83,6 @@ static inline int notify_page_fault(enum
}
#endif
-extern spinlock_t timerlist_lock;
-
-/*
- * Unlock any spinlocks which will prevent us from getting the
- * message out (timerlist_lock is acquired through the
- * console unblank code)
- */
-void bust_spinlocks(int yes)
-{
- if (yes) {
- oops_in_progress = 1;
- } else {
- int loglevel_save = console_loglevel;
- console_unblank();
- oops_in_progress = 0;
- /*
- * OK, the message is on the console. Now we call printk()
- * without oops_in_progress set so that printk will give klogd
- * a poke. Hold onto your hats...
- */
- console_loglevel = 15;
- printk(" ");
- console_loglevel = loglevel_save;
- }
-}
-
/*
* Check which address space is addressed by the access
* register in S390_lowcore.exc_access_id.
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86_64/mm/fault.c
@@ -69,27 +69,6 @@ static inline int notify_page_fault(enum
return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args);
}
-void bust_spinlocks(int yes)
-{
- int loglevel_save = console_loglevel;
- if (yes) {
- oops_in_progress = 1;
- } else {
-#ifdef CONFIG_VT
- unblank_screen();
-#endif
- oops_in_progress = 0;
- /*
- * OK, the message is on the console. Now we call printk()
- * without oops_in_progress set so that printk will give klogd
- * a poke. Hold onto your hats...
- */
- console_loglevel = 15; /* NMI oopser may have shut the console up */
- printk(" ");
- console_loglevel = loglevel_save;
- }
-}
-
/* Sometimes the CPU reports invalid exceptions on prefetch.
Check that here and ignore.
Opcode checker based on code by Richard Brunner */
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -3,7 +3,7 @@ # Makefile for some libs needed in the k
#
lib-y := ctype.o string.o vsprintf.o cmdline.o \
- bust_spinlocks.o rbtree.o radix-tree.o dump_stack.o \
+ rbtree.o radix-tree.o dump_stack.o \
idr.o div64.o int_sqrt.o bitmap.o extable.o prio_tree.o \
sha1.o irq_regs.o reciprocal_div.o
@@ -12,7 +12,7 @@ lib-$(CONFIG_SMP) += cpumask.o
lib-y += kobject.o kref.o kobject_uevent.o klist.o
-obj-y += sort.o parser.o halfmd4.o debug_locks.o random32.o
+obj-y += sort.o parser.o halfmd4.o debug_locks.o random32.o bust_spinlocks.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
--- a/lib/bust_spinlocks.c
+++ b/lib/bust_spinlocks.c
@@ -14,7 +14,7 @@ #include <linux/wait.h>
#include <linux/vt_kern.h>
-void bust_spinlocks(int yes)
+void __attribute__((weak)) bust_spinlocks(int yes)
{
if (yes) {
oops_in_progress = 1;
next reply other threads:[~2007-01-18 11:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-18 11:16 Alexey Dobriyan [this message]
2007-01-18 11:39 ` [PATCH 1/2] Consolidate bust_spinlocks() Martin Schwidefsky
2007-01-18 16:26 ` Alexey Dobriyan
2007-01-19 9:27 ` Martin Schwidefsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070118111626.GA6040@localhost.sw.ru \
--to=adobriyan@openvz.org \
--cc=akpm@osdl.org \
--cc=dev@sw.ru \
--cc=devel@openvz.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.