From: Claus Klein <claus.klein@arcormail.de>
To: buildroot@busybox.net
Subject: [Buildroot] buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/bfd.info: build error
Date: Sat, 20 Jan 2007 14:10:05 +0100 [thread overview]
Message-ID: <200701201410.06047.claus.klein@arcormail.de> (raw)
In-Reply-To: <200701192249.57232.claus.klein@arcormail.de>
On Friday 19 January 2007 22:49, Claus Klein wrote:
> Hi,
>
> I got a Warning: `makeinfo' is missing on your system.
> and the make failed?
>
> Is this a known problem?
>
> Best Regards,
>
> Claus
I stop at this point!
I'm not able to build any toolchain under OpenSuse 10.1 without `makeinfo'
What is the stable toolchain combination today?
I expected the 'make defconfig' would work.
It seems not?
I really appreciate your help.
Thank you
Claus
----------------------- my errors from tody ------------------------------
===================================
Date: Sa Jan 20 10:30:15 CET 2007
===================================
from uClibc nightly tests: http://www.uclibc.org/~vapier/
STAMP: snapshot 20070120 svn r17394
STAMP: toolchain used 'i386-gentoo-linux-uclibc'
STAMP: cross-i386-gentoo-linux-uclibc/binutils-2.17
STAMP: cross-i386-gentoo-linux-uclibc/gcc-4.1.1-r1
STAMP: cross-i386-gentoo-linux-uclibc/linux-headers-2.6.19
STAMP: cross-i386-gentoo-linux-uclibc/uclibc-0.9.28
i386 | i386 | Compile | PASS
claus at P3linux:~/src/buildroot> grep '^[^#]' .config | egrep -v 'BR2_PACKAGE_|BR2_TARGET_ROOTFS'
BR2_HAVE_DOT_CONFIG=y
BR2_i386=y
BR2_x86_i686=y
BR2_ARCH="i686"
BR2_ENDIAN="LITTLE"
BR2_WGET="wget --passive-ftp"
BR2_SVN="svn co"
BR2_ZCAT="zcat"
BR2_BZCAT="bzcat"
BR2_TAR_OPTIONS="--exclude=CVS --exclude=.svn"
BR2_DL_DIR="$(BASE_DIR)/dl"
BR2_SOURCEFORGE_MIRROR="surfnet"
BR2_STAGING_DIR="/tools/Linuxi386CDK"
BR2_TOPDIR_PREFIX=""
BR2_TOPDIR_SUFFIX=""
BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
BR2_GNU_TARGET_SUFFIX="linux-uclibc"
BR2_JLEVEL=1
BR2_KERNEL_HEADERS_2_6_19_2=y
BR2_DEFAULT_KERNEL_HEADERS="2.6.19.2"
BR2_UCLIBC_VERSION_0_9_28=y
BR2_PTHREADS_OLD=y
BR2_BINUTILS_VERSION_2_17=y
BR2_BINUTILS_VERSION="2.17"
BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
BR2_GCC_VERSION_4_1_1=y
BR2_GCC_VERSION="4.1.1"
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
BR2_INSTALL_LIBSTDCPP=y
BR2_GCC_SHARED_LIBGCC=y
BR2_CCACHE=y
BR2_MKLIBS=y
BR2_ENABLE_MULTILIB=y
BR2_LARGEFILE=y
BR2_TARGET_OPTIMIZATION="-Os -pipe"
BR2_BUSYBOX_VERSION_1_2_2_1=y
BR2_NETWORK_SUPPORT=y
claus at P3linux:~/src/buildroot>
##################################################################################
===================================
Date: Sa Jan 20 10:30:15 CET 2007
===================================
with: toolchain_build_i686/binutils-2.16.1
and: toolchain_build_i686/gcc-3.4.2
toolchain_build_i686/gcc-3.3.6
FIXME: gcc-3.3.6 failed too!
claus at P3linux:~/src/buildroot> make
Checking build system dependencies:
CC clean: Ok
CXX clean: Ok
CPP clean: Ok
CFLAGS clean: Ok
CXXFLAGS clean: Ok
sed works: Ok
which installed: Ok
GNU make version '3.80': Ok
C compiler '/usr/bin/gcc'
C compiler version '4.1.0': Ok
bison installed: Ok
flex installed: Ok
gettext installed: Ok
Build system dependencies: Ok
...
/home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2-initial/gcc/xgcc -B/home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2-initial/gcc/ -B/tools/Linuxi386CDK/i686-linux-uclibc/bin/ -B/tools/Linuxi386CDK/i686-linux-uclibc/lib/ -isystem /tools/Linuxi386CDK/i686-linux-uclibc/include -isystem /tools/Linuxi386CDK/i686-linux-uclibc/sys-include -O2 -DIN_GCC -DCROSS_COMPILE -DUSE_UCLIBC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -I. -I. -I/home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2/gcc -I/home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2/gcc/. -I/home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2/gcc/../include -g0 -finhibit-size-directive -fno-inline-functions -fno-exceptions -fno-zero-initialized-in-bss -fno-unit-at-a-time -fno-omit-frame-pointer \
-c /home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2/gcc/crtstuff.c -DCRT_BEGIN \
-o crtbegin.o
In file included from /home/claus/src/buildroot/toolchain_build_i686/uClibc_dev//usr/include/bits/posix1_lim.h:153,
from /home/claus/src/buildroot/toolchain_build_i686/uClibc_dev//usr/include/limits.h:144,
from /home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2-initial/gcc/include/limits.h:122,
from /home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2-initial/gcc/include/syslimits.h:7,
from /home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2-initial/gcc/include/limits.h:11,
from /home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2/gcc/tsystem.h:97,
from /home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2/gcc/crtstuff.c:62:
/home/claus/src/buildroot/toolchain_build_i686/uClibc_dev//usr/include/bits/local_lim.h:36:26: linux/limits.h: No such file or directory
make[2]: *** [crtbegin.o] Fehler 1
make[2]: Leaving directory `/home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2-initial/gcc'
make[1]: *** [all-gcc] Fehler 2
make[1]: Leaving directory `/home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2-initial'
make: *** [/home/claus/src/buildroot/toolchain_build_i686/gcc-3.4.2-initial/.compiled] Fehler 2
claus at P3linux:~/src/buildroot>
##################################################################################
with: toolchain_build_i686/binutils-2.16.91.0.7
and: toolchain_build_i686/binutils-2.17.50.0.9
make[5]: Leaving directory `/home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7-build/bfd/doc'
./chew -f /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/doc.str </home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/../mmo.c >mmo.tmp
/bin/sh /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/../../move-if-change mmo.tmp mmo.texi
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && cd /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc && \
rm -rf $backupdir && mkdir $backupdir && \
for f in /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/bfd.info /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/bfd.info-[0-9] /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/bfd.info-[0-9][0-9] /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/bfd.i[0-9] /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/bfd.i[0-9][0-9]; do \
if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
done; \
cd "$am__cwd"; \
if /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/missing makeinfo --split-size=5000000 --split-size=5000000 -I /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc \
-o /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/bfd.info /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/bfd.texinfo; \
then \
rc=0; \
cd /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc; \
else \
rc=$?; \
cd /home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc && \
$restore $backupdir/* `echo ".//home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/bfd.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
WARNING: `makeinfo' is missing on your system. You should only need it if
you modified a `.texi' or `.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy `make' (AIX,
DU, IRIX). You might want to install the `Texinfo' package or
the `GNU make' package. Grab either from any GNU archive site.
make[4]: *** [/home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/bfd.info] Fehler 1
make[4]: Leaving directory `/home/claus/src/buildroot/toolchain_build_i686/binutils-2.16.91.0.7-build/bfd/doc'
next prev parent reply other threads:[~2007-01-20 13:10 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-19 21:49 [Buildroot] buildroot/toolchain_build_i686/binutils-2.16.91.0.7/bfd/doc/bfd.info: build error Claus Klein
2007-01-20 13:10 ` Claus Klein [this message]
2007-01-20 17:34 ` Bernhard Fischer
2007-01-20 17:42 ` Claus Klein
2007-01-20 17:55 ` Claus Klein
2007-01-20 20:18 ` Bernhard Fischer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200701201410.06047.claus.klein@arcormail.de \
--to=claus.klein@arcormail.de \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.