From: Paolo Ornati <ornati@fastwebnet.it>
To: Robert Hancock <hancockr@shaw.ca>
Cc: "Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
"Björn Steinbrink" <B.Steinbrink@gmx.de>,
"Jens Axboe" <jens.axboe@oracle.com>,
"Jeff Garzik" <jeff@garzik.org>, "Tejun Heo" <htejun@gmail.com>
Subject: Re: SATA exceptions triggered by XFS (since 2.6.18)
Date: Sun, 21 Jan 2007 20:25:52 +0100 [thread overview]
Message-ID: <20070121202552.14cc29fe@localhost> (raw)
In-Reply-To: <45B3A392.6050609@shaw.ca>
On Sun, 21 Jan 2007 11:32:02 -0600
Robert Hancock <hancockr@shaw.ca> wrote:
> It looks like what you're getting is an actual NCQ write timing out.
> That makes the bisect result not very interesting since obviously it
> wouldn't have issued any NCQ writes before NCQ support was
> implemented. Seeing as how it's also an entirely different driver I
> imagine it's a different problem than what I've been looking at.
>
> Maybe that drive just has some issues with NCQ? I would be surprised
> at that with a Seagate though..
I don't know. It's a two years old ST380817AS.
# smartctl -a -d ata /dev/sda
smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST380817AS
Serial Number: 4MR08EK8
Firmware Version: 3.42
User Capacity: 80,026,361,856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Sun Jan 21 20:15:40 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 47) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 059 049 006 Pre-fail Always - 215927244
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2182
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 204305750
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 3494
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2541
194 Temperature_Celsius 0x0022 024 040 000 Old_age Always - 24 (Lifetime Min/Max 0/15)
195 Hardware_ECC_Recovered 0x001a 059 049 000 Old_age Always - 215927244
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 12 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 12 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0d 5b 9d 34 e1 Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 4e 9d 34 e1 00 00:03:03.851 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.848 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.846 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.843 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.839 READ DMA
Error 11 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0d 5b 9d 34 e1 Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 4e 9d 34 e1 00 00:03:03.851 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.848 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.846 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.843 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.839 READ DMA
Error 10 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0d 5b 9d 34 e1 Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 4e 9d 34 e1 00 00:03:03.851 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.848 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.846 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.843 READ DMA
c8 00 00 16 9c 34 e1 00 00:03:03.839 READ DMA
Error 9 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0d 5b 9d 34 e1 Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 4e 9d 34 e1 00 00:03:03.851 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.848 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.846 READ DMA
c8 00 00 16 9c 34 e1 00 00:03:03.843 READ DMA
c8 00 00 0e 9b 34 e1 00 00:03:03.839 READ DMA
Error 8 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0d 5b 9d 34 e1 Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 4e 9d 34 e1 00 00:03:03.851 READ DMA
c8 00 00 4e 9d 34 e1 00 00:03:03.848 READ DMA
c8 00 00 16 9c 34 e1 00 00:03:03.846 READ DMA
c8 00 00 0e 9b 34 e1 00 00:03:03.843 READ DMA
c8 00 00 8e 99 34 e1 00 00:03:03.839 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
Paolo Ornati
Linux 2.6.20-rc5 on x86_64
next prev parent reply other threads:[~2007-01-21 19:26 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-21 14:29 SATA exceptions triggered by XFS (since 2.6.18) Paolo Ornati
2007-01-21 16:40 ` Paolo Ornati
2007-01-21 17:32 ` Robert Hancock
2007-01-21 19:25 ` Paolo Ornati [this message]
2007-01-21 20:32 ` Chr
2007-01-22 0:54 ` Jiri Slaby
2007-01-22 8:16 ` Paolo Ornati
2007-01-22 2:46 ` Tejun Heo
2007-01-22 8:38 ` Paolo Ornati
2007-01-22 9:35 ` Tejun Heo
2007-01-22 10:02 ` Paolo Ornati
2007-01-22 10:21 ` Paolo Ornati
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070121202552.14cc29fe@localhost \
--to=ornati@fastwebnet.it \
--cc=B.Steinbrink@gmx.de \
--cc=hancockr@shaw.ca \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=jens.axboe@oracle.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.