Re: [BUG] eth0 appers many times in /proc/interrupts after resume

[Frederik Deweerdt <deweerdt@free.fr>]

On Sun, Jan 21, 2007 at 09:17:41PM +0200, Andrei Popa wrote:
> It's the 10th resume and in /proc/interrupts eth0 appers 10 times.
> 
Hi,

The e100_resume() function should be calling netif_device_detach and
free_irq. Could you try the following (compile tested) patch?

Regards,
Frederik

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>

diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 2fe0445..0c376e4 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2671,6 +2671,7 @@ static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
 	del_timer_sync(&nic->watchdog);
 	netif_carrier_off(nic->netdev);
 
+	netif_device_detach(netdev);
 	pci_save_state(pdev);
 
 	if ((nic->flags & wol_magic) | e100_asf(nic)) {
@@ -2682,6 +2683,7 @@ static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
 	}
 
 	pci_disable_device(pdev);
+	free_irq(pdev->irq, netdev);
 	pci_set_power_state(pdev, PCI_D3hot);
 
 	return 0;