From: "Ahmed S. Darwish" <darwish.07@gmail.com>
To: uclinux-v850@lsi.nec.co.jp
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 2.6.20] arch V850: user ARRAY_SIZE macro when appropriate
Date: Mon, 5 Feb 2007 04:42:37 +0200 [thread overview]
Message-ID: <20070205024237.GL18118@Ahmed> (raw)
In-Reply-To: <20070205023935.GG18118@Ahmed>
Hi all,
A patch to use ARRAY_SIZE macro already defined in linux/kernel.h
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
---
Patch isn't compile checked cause I have no V850 board at hand.
Thanks,
diff --git a/arch/v850/kernel/anna.c b/arch/v850/kernel/anna.c
index 40892d3..0e42904 100644
--- a/arch/v850/kernel/anna.c
+++ b/arch/v850/kernel/anna.c
@@ -114,7 +114,7 @@ static struct v850e_intc_irq_init irq_inits[] = {
{ "ST", IRQ_INTST(0), IRQ_INTST_NUM, 3, 5 },
{ 0 }
};
-#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1)
+#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
diff --git a/arch/v850/kernel/as85ep1.c b/arch/v850/kernel/as85ep1.c
index 5352f8a..18437bc 100644
--- a/arch/v850/kernel/as85ep1.c
+++ b/arch/v850/kernel/as85ep1.c
@@ -142,7 +142,7 @@ static struct v850e_intc_irq_init irq_inits[] = {
{ "ST", IRQ_INTST(0), IRQ_INTST_NUM, 3, 5 },
{ 0 }
};
-#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1)
+#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
diff --git a/arch/v850/kernel/fpga85e2c.c b/arch/v850/kernel/fpga85e2c.c
index cb04a69..5c49235 100644
--- a/arch/v850/kernel/fpga85e2c.c
+++ b/arch/v850/kernel/fpga85e2c.c
@@ -138,7 +138,7 @@ struct v850e_intc_irq_init irq_inits[] = {
{ "RPU", IRQ_RPU(0), IRQ_RPU_NUM, 1, 6 },
{ 0 }
};
-#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1)
+#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
diff --git a/arch/v850/kernel/gbus_int.c b/arch/v850/kernel/gbus_int.c
index 25d636e..b2bcc25 100644
--- a/arch/v850/kernel/gbus_int.c
+++ b/arch/v850/kernel/gbus_int.c
@@ -16,6 +16,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/signal.h>
+#include <linux/kernel.h>
#include <asm/machdep.h>
@@ -36,7 +37,7 @@ struct used_gint {
{ 1, GBUS_INT_PRIORITY_HIGH },
{ 3, GBUS_INT_PRIORITY_LOW }
};
-#define NUM_USED_GINTS (sizeof used_gint / sizeof used_gint[0])
+#define NUM_USED_GINTS ARRAY_SIZE(used_gint)
/* A table of which GINT is used by each GBUS interrupts (they are
assigned based on priority). */
@@ -231,8 +232,7 @@ struct gbus_int_irq_init gbus_irq_inits[] __initdata = {
{ "GBUS_INT", IRQ_GBUS_INT(0), IRQ_GBUS_INT_NUM, 1, 6},
{ 0 }
};
-#define NUM_GBUS_IRQ_INITS \
- ((sizeof gbus_irq_inits / sizeof gbus_irq_inits[0]) - 1)
+#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1)
static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
diff --git a/arch/v850/kernel/ma.c b/arch/v850/kernel/ma.c
index 2aa8ab0..143774d 100644
--- a/arch/v850/kernel/ma.c
+++ b/arch/v850/kernel/ma.c
@@ -43,7 +43,7 @@ static struct v850e_intc_irq_init irq_inits[] = {
{ "ST", IRQ_INTST(0), IRQ_INTST_NUM, 4, 5 },
{ 0 }
};
-#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1)
+#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
diff --git a/arch/v850/kernel/me2.c b/arch/v850/kernel/me2.c
index 14b0c88..38be5c1 100644
--- a/arch/v850/kernel/me2.c
+++ b/arch/v850/kernel/me2.c
@@ -44,7 +44,7 @@ static struct v850e_intc_irq_init irq_inits[] = {
{ "UBTITO", IRQ_INTUBTITO(0), IRQ_INTUBTITO_NUM, 5, 4 },
{ 0 }
};
-#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1)
+#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
diff --git a/arch/v850/kernel/rte_cb.c b/arch/v850/kernel/rte_cb.c
index 0f7f6cd..43018e1 100644
--- a/arch/v850/kernel/rte_cb.c
+++ b/arch/v850/kernel/rte_cb.c
@@ -15,6 +15,7 @@
#include <linux/irq.h>
#include <linux/fs.h>
#include <linux/module.h>
+#include <linux/kernel.h>
#include <asm/machdep.h>
#include <asm/v850e_uart.h>
@@ -176,8 +177,7 @@ static struct gbus_int_irq_init gbus_irq_inits[] = {
#endif
{ 0 }
};
-#define NUM_GBUS_IRQ_INITS \
- ((sizeof gbus_irq_inits / sizeof gbus_irq_inits[0]) - 1)
+#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1)
static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
diff --git a/arch/v850/kernel/rte_mb_a_pci.c b/arch/v850/kernel/rte_mb_a_pci.c
index 35213fa..35a4bd5 100644
--- a/arch/v850/kernel/rte_mb_a_pci.c
+++ b/arch/v850/kernel/rte_mb_a_pci.c
@@ -70,8 +70,7 @@ static struct mb_pci_dev_irq mb_pci_dev_irqs[] = {
/* PCI slot 2 */
{ 9, IRQ_MB_A_PCI2(0), 1 }
};
-#define NUM_MB_PCI_DEV_IRQS \
- (sizeof mb_pci_dev_irqs / sizeof mb_pci_dev_irqs[0])
+#define NUM_MB_PCI_DEV_IRQS ARRAY_SIZE(mb_pci_dev_irqs)
\f
/* PCI configuration primitives. */
diff --git a/arch/v850/kernel/rte_me2_cb.c b/arch/v850/kernel/rte_me2_cb.c
index 3be355a..46803d4 100644
--- a/arch/v850/kernel/rte_me2_cb.c
+++ b/arch/v850/kernel/rte_me2_cb.c
@@ -170,8 +170,7 @@ static struct cb_pic_irq_init cb_pic_irq_inits[] = {
{ "CB_EXTTM2", IRQ_CB_EXTTM2, 1, 1, 6 },
{ 0 }
};
-#define NUM_CB_PIC_IRQ_INITS \
- ((sizeof cb_pic_irq_inits / sizeof cb_pic_irq_inits[0]) - 1)
+#define NUM_CB_PIC_IRQ_INITS (ARRAY_SIZE(cb_pic_irq_inits) - 1)
static struct hw_interrupt_type cb_pic_hw_itypes[NUM_CB_PIC_IRQ_INITS];
static unsigned char cb_pic_active_irqs = 0;
diff --git a/arch/v850/kernel/teg.c b/arch/v850/kernel/teg.c
index 290d506..699248f 100644
--- a/arch/v850/kernel/teg.c
+++ b/arch/v850/kernel/teg.c
@@ -43,7 +43,7 @@ static struct v850e_intc_irq_init irq_inits[] = {
{ "ST", IRQ_INTST(0), IRQ_INTST_NUM, 1, 5 },
{ 0 }
};
-#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1)
+#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
--
Ahmed S. Darwish
http://darwish-07.blogspot.com
next prev parent reply other threads:[~2007-02-05 2:42 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-05 2:39 [PATCH 00] A series of patches to use ARRAY_SIZE macro under arch/ Ahmed S. Darwish
2007-02-05 2:40 ` [PATCH 2.6.20] arch CRIS: user ARRAY_SIZE macro when appropriate Ahmed S. Darwish
2007-02-05 2:41 ` [PATCH 2.6.20] arch AVR32: Use " Ahmed S. Darwish
2007-02-05 8:19 ` Haavard Skinnemoen
2007-02-05 2:41 ` [PATCH 2.6.20] arch M68KNOMMU: user " Ahmed S. Darwish
2007-02-05 5:40 ` Greg Ungerer
2007-02-05 2:42 ` [PATCH 2.6.20] arch MIPS: " Ahmed S. Darwish
2007-02-05 18:28 ` Ralf Baechle
2007-02-05 2:42 ` Ahmed S. Darwish [this message]
2007-02-05 2:42 ` [PATCH 2.6.20] arch PowerPC: " Ahmed S. Darwish
2007-02-05 2:43 ` [PATCH 2.6.20] arch PPC: " Ahmed S. Darwish
2007-02-05 2:43 ` [PATCH 2.6.20] arch M68K: " Ahmed S. Darwish
2007-02-05 20:15 ` Geert Uytterhoeven
2007-02-05 2:43 ` [PATCH 2.6.20] arch ARM: Use " Ahmed S. Darwish
2007-02-05 9:24 ` Ian Molton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070205024237.GL18118@Ahmed \
--to=darwish.07@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-v850@lsi.nec.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.