From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Bob Puff" <bob@nleaudio.com>
Date: Sun, 18 Feb 2007 23:32:09 +0000
Subject: [LARTC] prio not seeming to work
Message-Id: <20070218232851.M8467@nleaudio.com>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Hello,

I am trying to mess with a prio type qdisc, and must be missing something. 
Here's my sample code:

tc qdisc add dev eth0 root handle 1: prio
tc filter add dev eth0 parent 1:0 prio 1 protocol ip u32 \
  match ip dst 208.0.0.0/8 flowid 1:1
tc filter add dev eth0 parent 1:0 prio 3 protocol ip u32 \
  match ip dst 0.0.0.0/0 flowid 1:3

I would assume that any traffic going to 208.x.x.x should be getting priority
over all other traffic.  But when I set up two simultaneous FTP uploads, one
to a server in the 208.x.x.x block and one to another not in that block, both
end up at the same transfer rate.. This is going into an ADSL line.

What am I missing?

Bob
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc