From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Neil Brown <neilb@suse.de>,
Jeff Garzik <jeff@garzik.org>,
linux-ide@vger.kernel.org, Jens Axboe <jens.axboe@oracle.com>
Subject: Re: 2.6.20-mm2
Date: Mon, 19 Feb 2007 00:25:48 +0100 [thread overview]
Message-ID: <200702190025.49273.rjw@sisk.pl> (raw)
In-Reply-To: <20070218114326.35d7645b.akpm@linux-foundation.org>
On Sunday, 18 February 2007 20:43, Andrew Morton wrote:
> On Sun, 18 Feb 2007 13:44:54 +0100 "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
>
> > On Sunday, 18 February 2007 06:51, Andrew Morton wrote:
> > >
> > > Temporarily at
> > >
> > > http://userweb.kernel.org/~akpm/2.6.20-mm2/
> > >
> > > Will appear later at
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20/2.6.20-mm2/
> >
> > Two problems:
> >
> > 1) A showstopper with the root partition on RAID1:
> >
> > md: raid1 personality registered for level 1
> > [--snip--]
> > md: multipath personality registered for level -4
> > register_blkdev: failed to get major for mdp
> > [--snip--]
> > VFS: Cannot open root device "md1" or unknown-block(0,0)
>
> Someone else reported that against mainline. Can you please debug it a bit?
Sure, tomorrow I will.
> I'd suggested reverting the recent changes in there:
>
> --- a/block/genhd.c~a
> +++ a/block/genhd.c
> @@ -61,14 +61,6 @@ int register_blkdev(unsigned int major,
> /* temporary */
> if (major == 0) {
> for (index = ARRAY_SIZE(major_names)-1; index > 0; index--) {
> - /*
> - * Disallow the LANANA-assigned LOCAL/EXPERIMENTAL
> - * majors
> - */
> - if ((60 <= index && index <= 63) ||
> - (120 <= index && index <= 127) ||
> - (240 <= index && index <= 254))
> - continue;
> if (major_names[index] == NULL)
> break;
> }
> _
>
> but I don't see how they could cause this.
>
>
> > At the moment I have no serial console attached to the box, so I had to rewrite
> > the messages manually.
>
> netconsole is good.
I know. :-)
In the meantime, I've got something worse on another x86_64 box:
Asus Laptop ACPI Extras version 0.30
L5D model detected, supported
audit(1171831698.918:2): audit_pid=4281 old=0 by auid=4294967295
general protection fault: 0000 [2] PREEMPT
last sysfs file: /class/net/eth2/carrier
CPU 0
Modules linked in: af_packet ipv6 snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device asus_acpi backlight button battery ac dm_mod pcmr
Pid: 178, comm: pdflush Not tainted 2.6.20-mm2 #1
RIP: 0010:[<ffffffff8034bce4>] [<ffffffff8034bce4>] __make_request+0x134/0x370
RSP: 0000:ffff81005ed659a0 EFLAGS: 00010297
RAX: 00000000ffffffff RBX: 6b6b6b6b6b6b6b6b RCX: 000000000203396a
RDX: 0000000100000000 RSI: ffff810037b4dbb0 RDI: ffff81004683d8c0
RBP: ffff81005ed659f0 R08: ffff81004683d070 R09: ffff81003d333cc0
R10: 0000000000000000 R11: 0000000000000000 R12: ffff810037b4dbb0
R13: ffff81005daba3f0 R14: ffff810037daca90 R15: ffff81005daba3d0
FS: 00002ad4a29e6d00(0000) GS:ffffffff805db000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00002b6a345aa000 CR3: 0000000056585000 CR4: 00000000000006e0
Process pdflush (pid: 178, threadinfo ffff81005ed64000, task ffff810037b060c0)
Stack: ffff810002852540 0000000000000001 ffff810037b4dbb0 ffffffff8026be21
ffff81005ed65a40 0000000000000008 ffff810037b4dbb0 0000000000000800
0000000000000008 ffff8100021d94e0 ffff81005ed65a40 ffffffff80348e7c
Call Trace:
[<ffffffff8026be21>] mempool_alloc_slab+0x11/0x20
[<ffffffff80348e7c>] generic_make_request+0x1ec/0x230
[<ffffffff8034b7e6>] submit_bio+0xf6/0x110
[<ffffffff802b60f0>] submit_bh+0x100/0x130
[<ffffffff802b788a>] __block_write_full_page+0x1ca/0x2e0
[<ffffffff802bc040>] blkdev_get_block+0x0/0x70
[<ffffffff802bc040>] blkdev_get_block+0x0/0x70
[<ffffffff802b7a93>] block_write_full_page+0xf3/0x110
[<ffffffff802baeb3>] blkdev_writepage+0x13/0x20
[<ffffffff8026eb85>] __writepage+0x15/0x40
[<ffffffff8026f1e3>] write_cache_pages+0x1f3/0x360
[<ffffffff8026eb70>] __writepage+0x0/0x40
[<ffffffff8026f372>] generic_writepages+0x22/0x30
[<ffffffff8026f3c6>] do_writepages+0x46/0x80
[<ffffffff802b1f67>] __writeback_single_inode+0x1d7/0x370
[<ffffffff802b2355>] generic_sync_sb_inodes+0x35/0x2b0
[<ffffffff802b24f9>] generic_sync_sb_inodes+0x1d9/0x2b0
[<ffffffff802b29f2>] writeback_inodes+0x82/0x100
[<ffffffff802b25f5>] sync_sb_inodes+0x25/0x30
[<ffffffff802b2a08>] writeback_inodes+0x98/0x100
[<ffffffff8026fd40>] pdflush+0x0/0x1e0
[<ffffffff8026f934>] wb_kupdate+0x94/0x110
[<ffffffff8026fe68>] pdflush+0x128/0x1e0
[<ffffffff8026f8a0>] wb_kupdate+0x0/0x110
[<ffffffff8026fd40>] pdflush+0x0/0x1e0
[<ffffffff80240863>] kthread+0xd3/0x110
[<ffffffff80240700>] keventd_create_kthread+0x0/0x90
[<ffffffff8020a3f8>] child_rip+0xa/0x12
[<ffffffff80483e5b>] _spin_unlock_irq+0x2b/0x60
[<ffffffff80209fb0>] restore_args+0x0/0x30
[<ffffffff80240790>] kthread+0x0/0x110
[<ffffffff8020a3ee>] child_rip+0x0/0x12
Code: 48 8b 43 08 0f 18 08 49 39 dd 75 a2 49 8b be 38 02 00 00 e8
RIP [<ffffffff8034bce4>] __make_request+0x134/0x370
RSP <ffff81005ed659a0>
PM: Adding info for No Bus:vcs10
PM: Adding info for No Bus:vcsa10
It looks _really_ bad to me. :-(
> > 2) On HPC nx6325 I get the following 100% of the time during the resume from
> > disk:
> >
> > BUG: at drivers/pci/pci.c:823 pcim_enable_device()
> >
> > Call Trace:
> > [<ffffffff80325ff8>] pcim_enable_device+0x93/0xb3
> > [<ffffffff803a974a>] ata_pci_device_do_resume+0x21/0x5e
> > [<ffffffff803b5e6c>] sil_pci_device_resume+0x1c/0x51
> > [<ffffffff8032800d>] pci_device_resume+0x22/0x53
> > [<ffffffff8039ae58>] resume_device+0xca/0x131
> > [<ffffffff8039af40>] dpm_resume+0x81/0xd3
> > [<ffffffff8039afc2>] device_resume+0x30/0x45
> > [<ffffffff802a0792>] snapshot_ioctl+0x245/0x63e
> > [<ffffffff8023cfcc>] do_ioctl+0x5e/0x77
> > [<ffffffff8022d2b3>] vfs_ioctl+0x25c/0x279
> > [<ffffffff80246a80>] sys_ioctl+0x5f/0x82
> > [<ffffffff80215586>] sys_write+0x47/0x70
> > [<ffffffff8025711e>] system_call+0x7e/0x83
> >
> > Nevertheless, the system seems to be fully functional after the resume.
> >
> > [I've been observing it since 2.6.20-git10 and have reported it for a couple
> > of times, but apparently nobody cares. :-(]
>
> This is a Tejun thing - apparently it's due to swsusp calling suspend once
> and resume twice (or is it vice versa). He'll be looking into it soon.
OK
next prev parent reply other threads:[~2007-02-18 23:31 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-18 5:51 2.6.20-mm2 Andrew Morton
2007-02-18 6:18 ` 2.6.20-mm2 Dave Airlie
2007-02-18 6:34 ` 2.6.20-mm2 Andrew Morton
2007-02-18 12:44 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-18 19:43 ` 2.6.20-mm2 Andrew Morton
2007-02-18 23:25 ` Rafael J. Wysocki [this message]
2007-02-18 23:39 ` 2.6.20-mm2 Michal Piotrowski
2007-02-19 0:00 ` 2.6.20-mm2 Andrew Morton
2007-02-19 11:28 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-19 11:45 ` 2.6.20-mm2 Michal Piotrowski
2007-02-20 0:04 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-20 21:16 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-20 21:46 ` 2.6.20-mm2 Jeff Garzik
2007-02-20 0:43 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-20 1:20 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-20 6:31 ` 2.6.20-mm2 Andrew Morton
2007-02-20 22:12 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-18 13:06 ` 2.6.20-mm2: Oops in generic_make_request Laurent Riffard
2007-02-18 17:58 ` Mattia Dongili
2007-02-18 19:49 ` Andrew Morton
2007-02-18 20:05 ` Michal Piotrowski
2007-02-20 13:04 ` [-mm patch] fix locking in __make_request (was Re: 2.6.20-mm2: Oops in generic_make_request) Frederik Deweerdt
2007-02-19 13:34 ` Jens Axboe
2007-02-20 14:29 ` Frederik Deweerdt
2007-02-19 13:52 ` Michal Piotrowski
2007-02-19 14:08 ` Michal Piotrowski
2007-02-20 14:32 ` Frederik Deweerdt
2007-02-18 18:20 ` 2.6.20-mm2 Michal Piotrowski
2007-02-18 23:32 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-19 0:28 ` 2.6.20-mm2 Andrew Morton
2007-02-19 5:13 ` 2.6.20-mm2 David Brownell
2007-02-20 22:07 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-22 3:57 ` 2.6.20-mm2 David Brownell
2007-02-22 8:33 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-22 22:17 ` 2.6.20-mm2 David Brownell
2007-02-23 16:36 ` 2.6.20-mm2 David Brownell
2007-03-04 22:36 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-19 18:28 ` 2.6.20-mm2 Rafael J. Wysocki
2007-02-18 23:33 ` 2.6.20-mm2: compilation fix Rafael J. Wysocki
2007-02-19 0:29 ` Andrew Morton
2007-02-19 11:33 ` Rafael J. Wysocki
2007-02-20 0:07 ` [-mm patch] fs/9p/vfs_addr.c: make 2 functions static Adrian Bunk
2007-02-20 0:54 ` Eric Van Hensbergen
2007-02-20 0:07 ` [-mm patch] drivers/mmc/Kconfig source drivers/mmc/card/Kconfig Adrian Bunk
2007-02-20 6:45 ` Pierre Ossman
2007-02-20 0:08 ` [-mm patch] drivers/video/sm501fb.c: make 4 functions static Adrian Bunk
2007-02-20 0:08 ` 2.6.20-mm2: BLOCK=n compile error Adrian Bunk
2007-02-20 0:08 ` [-mm patch] UNION_FS must depend on SLAB Adrian Bunk
2007-02-20 6:37 ` Pekka Enberg
2007-02-20 15:13 ` Josef Sipek
2007-02-21 3:07 ` [Unionfs] " hooanon05
2007-02-21 22:19 ` Andrew Morton
2007-02-22 2:00 ` Josef Sipek
2007-02-22 2:26 ` Andrew Morton
2007-02-22 3:10 ` Josef Sipek
2007-02-22 6:17 ` Pekka Enberg
2007-02-22 6:18 ` Pekka Enberg
2007-02-22 6:28 ` Josef Sipek
2007-02-22 6:42 ` Christoph Lameter
2007-02-22 2:33 ` [Unionfs] " Erez Zadok
2007-02-21 5:19 ` Josef Sipek
2007-02-20 7:39 ` 2.6.20-mm2 KAMEZAWA Hiroyuki
2007-02-20 10:06 ` 2.6.20-mm2 Andy Whitcroft
2007-02-20 11:14 ` 2.6.20-mm2 Maciej Rutecki
2007-02-20 11:38 ` 2.6.20-mm2 Maciej Rutecki
2007-02-20 21:23 ` 2.6.20-mm2: possible recursive locking detected (reiserfs-related) Rafael J. Wysocki
2007-02-20 22:48 ` Tilman Schmidt
2007-02-21 10:52 ` [-mm patch] MTD_UBI_DEBUG must depend on SYSFS Adrian Bunk
2007-02-21 10:52 ` Adrian Bunk
2007-02-21 11:57 ` [-mm patch] i386 mpparse.c: remove an unused variable Adrian Bunk
2007-02-25 13:15 ` 2.6.20-mm2 Jean Delvare
2007-02-27 20:25 ` 2.6.20-mm2 Andrew Morton
2007-02-28 9:07 ` 2.6.20-mm2 Jean Delvare
2007-02-26 22:23 ` [-mm patch] LGUEST must depend on NET Adrian Bunk
2007-02-26 23:42 ` Rusty Russell
2007-03-01 10:48 ` [-mm patch] arch/i386/xen/: possible cleanups Adrian Bunk
2007-03-01 10:53 ` Jeremy Fitzhardinge
2007-03-01 11:55 ` Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200702190025.49273.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=akpm@linux-foundation.org \
--cc=jeff@garzik.org \
--cc=jens.axboe@oracle.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.