From: Ivo van Doorn <ivdoorn@gmail.com>
To: Michael Buesch <mb@bu3sch.de>
Cc: Jiri Benc <jbenc@suse.cz>,
"John W. Linville" <linville@tuxdriver.com>,
linux-wireless@vger.kernel.org
Subject: Re: [PATCH 1/3] d80211: Split antenna selection into TX and RX antenna
Date: Wed, 21 Feb 2007 17:27:54 +0100 [thread overview]
Message-ID: <200702211727.55015.IvDoorn@gmail.com> (raw)
In-Reply-To: <200702211712.54089.mb@bu3sch.de>
On Wednesday 21 February 2007 17:12, Michael Buesch wrote:
> On Wednesday 21 February 2007 17:02, Ivo van Doorn wrote:
> > Currently d80211 only uses a single variable for antenna selection,
> > some devices (rt2x00) can configure the TX and RX antenna
> > seperately from eachother.
> > Assuming that antenna_sel is only for tx, and rx is "the other antenna"
> > is flawed and does hinder possible switching of RX antenna based
> > on RSSI results. And configuring the wrong antenna also impacts
> > transfer rates and link quality.
> >
> > This patch will remove the usage of the IOCTL call:
> > PRISM2_PARAM_ANTENNA_SEL but will restore the usage of
> > (the already excisting) IOCTL calls PRISM2_PARAM_ANTSEL_TX and
> > PRISM2_PARAM_ANTSEL_RX.
> >
> > Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
> >
> > ---
> >
> > diff --git a/include/net/d80211.h b/include/net/d80211.h
> > index 551fe46..68c8c8a 100644
> > --- a/include/net/d80211.h
> > +++ b/include/net/d80211.h
> > @@ -196,7 +196,8 @@ struct ieee80211_tx_control {
> > * above */
> > u8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. */
> > u8 power_level; /* per-packet transmit power level, in dBm */
> > - u8 antenna_sel; /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */
> > + u8 antenna_sel_tx; /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */
> > + u8 antenna_sel_rx; /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */
>
> This doesn't make sense to me.
> Why should we want to set the RX antenna on TXing a packet?
Good point. :)
Here is the new version, I have kep the rename form antenna_sel to
antenna_sel_tx since I think this rename would make some sense since
the configuration structure also defines 2 different antenna_sel fields.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
diff --git a/include/net/d80211.h b/include/net/d80211.h
index 551fe46..af26661 100644
--- a/include/net/d80211.h
+++ b/include/net/d80211.h
@@ -196,7 +196,7 @@ struct ieee80211_tx_control {
* above */
u8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. */
u8 power_level; /* per-packet transmit power level, in dBm */
- u8 antenna_sel; /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */
+ u8 antenna_sel_tx; /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */
s8 key_idx; /* -1 = do not encrypt, >= 0 keyidx from
* hw->set_key() */
u8 icv_len; /* length of the ICV/MIC field in octets */
@@ -285,10 +285,9 @@ struct ieee80211_conf {
u8 antenna_max; /* maximum antenna gain */
short tx_power_reduction; /* in 0.1 dBm */
- int antenna_sel; /* default antenna conf:
- * 0 = default/diversity,
- * 1 = Ant0,
- * 2 = Ant1 */
+ /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */
+ u8 antenna_sel_tx;
+ u8 antenna_sel_rx;
int antenna_def;
int antenna_mode;
diff --git a/net/d80211/ieee80211.c b/net/d80211/ieee80211.c
index 273cba1..72f1935 100644
--- a/net/d80211/ieee80211.c
+++ b/net/d80211/ieee80211.c
@@ -1075,9 +1075,9 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx,
control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK;
tx->sta->clear_dst_mask = 0;
}
- control->antenna_sel = local->hw.conf.antenna_sel;
+ control->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
if (local->sta_antenna_sel != STA_ANTENNA_SEL_AUTO && tx->sta)
- control->antenna_sel = tx->sta->antenna_sel;
+ control->antenna_sel_tx = tx->sta->antenna_sel_tx;
hdrlen = ieee80211_get_hdrlen(tx->fc);
if (skb->len > hdrlen + sizeof(rfc1042_header) + 2) {
u8 *pos = &skb->data[hdrlen + sizeof(rfc1042_header)];
@@ -1788,7 +1788,7 @@ struct sk_buff * ieee80211_beacon_get(struct ieee80211_hw *hw, int if_id,
control->tx_rate = (local->short_preamble &&
(rate->flags & IEEE80211_RATE_PREAMBLE2)) ?
rate->val2 : rate->val;
- control->antenna_sel = local->hw.conf.antenna_sel;
+ control->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
control->power_level = local->hw.conf.power_level;
control->flags |= IEEE80211_TXCTL_NO_ACK;
control->retry_limit = 1;
diff --git a/net/d80211/ieee80211_ioctl.c b/net/d80211/ieee80211_ioctl.c
index cad4d54..20a200a 100644
--- a/net/d80211/ieee80211_ioctl.c
+++ b/net/d80211/ieee80211_ioctl.c
@@ -2480,6 +2480,18 @@ static int ieee80211_ioctl_prism2_param(struct net_device *dev,
"for low-level driver\n", dev->name, value);
break;
+ case PRISM2_PARAM_ANTSEL_TX:
+ local->hw.conf.antenna_sel_tx = value;
+ if (ieee80211_hw_config(local))
+ ret = -EINVAL;
+ break;
+
+ case PRISM2_PARAM_ANTSEL_RX:
+ local->hw.conf.antenna_sel_rx = value;
+ if (ieee80211_hw_config(local))
+ ret = -EINVAL;
+ break;
+
case PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES:
local->cts_protect_erp_frames = value;
break;
@@ -2532,12 +2544,6 @@ static int ieee80211_ioctl_prism2_param(struct net_device *dev,
ret = ieee80211_ioctl_set_radio_enabled(dev, value);
break;
- case PRISM2_PARAM_ANTENNA_SEL:
- local->hw.conf.antenna_sel = value;
- if (ieee80211_hw_config(local))
- ret = -EINVAL;
- break;
-
case PRISM2_PARAM_ANTENNA_MODE:
local->hw.conf.antenna_mode = value;
if (ieee80211_hw_config(local))
@@ -2712,6 +2718,14 @@ static int ieee80211_ioctl_get_prism2_param(struct net_device *dev,
*param = sdata->ieee802_1x;
break;
+ case PRISM2_PARAM_ANTSEL_TX:
+ *param = local->hw.conf.antenna_sel_tx;
+ break;
+
+ case PRISM2_PARAM_ANTSEL_RX:
+ *param = local->hw.conf.antenna_sel_rx;
+ break;
+
case PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES:
*param = local->cts_protect_erp_frames;
break;
@@ -2735,10 +2749,6 @@ static int ieee80211_ioctl_get_prism2_param(struct net_device *dev,
*param = local->next_mode;
break;
- case PRISM2_PARAM_ANTENNA_SEL:
- *param = local->hw.conf.antenna_sel;
- break;
-
case PRISM2_PARAM_ANTENNA_MODE:
*param = local->hw.conf.antenna_mode;
break;
diff --git a/net/d80211/ieee80211_sta.c b/net/d80211/ieee80211_sta.c
index f5dd80f..9f36ba6 100644
--- a/net/d80211/ieee80211_sta.c
+++ b/net/d80211/ieee80211_sta.c
@@ -2220,7 +2220,7 @@ static int ieee80211_sta_join_ibss(struct net_device *dev,
control.tx_rate = (local->short_preamble &&
(rate->flags & IEEE80211_RATE_PREAMBLE2)) ?
rate->val2 : rate->val;
- control.antenna_sel = local->hw.conf.antenna_sel;
+ control.antenna_sel_tx = local->hw.conf.antenna_sel_tx;
control.power_level = local->hw.conf.power_level;
control.flags |= IEEE80211_TXCTL_NO_ACK;
control.retry_limit = 1;
diff --git a/net/d80211/ieee80211_sysfs.c b/net/d80211/ieee80211_sysfs.c
index b9d0973..4c44c73 100644
--- a/net/d80211/ieee80211_sysfs.c
+++ b/net/d80211/ieee80211_sysfs.c
@@ -153,7 +153,8 @@ static ssize_t ieee80211_local_show_##name(struct class_device *cd, \
IEEE80211_LOCAL_SHOW(channel, hw.conf.channel, "%d");
IEEE80211_LOCAL_SHOW(frequency, hw.conf.freq, "%d");
IEEE80211_LOCAL_SHOW(radar_detect, hw.conf.radar_detect, "%d");
-IEEE80211_LOCAL_SHOW(antenna_sel, hw.conf.antenna_sel, "%d");
+IEEE80211_LOCAL_SHOW(antenna_sel_tx, hw.conf.antenna_sel_tx, "%d");
+IEEE80211_LOCAL_SHOW(antenna_sel_rx, hw.conf.antenna_sel_rx, "%d");
IEEE80211_LOCAL_SHOW(bridge_packets, bridge_packets, "%d");
IEEE80211_LOCAL_SHOW(key_tx_rx_threshold, key_tx_rx_threshold, "%d");
IEEE80211_LOCAL_SHOW(rts_threshold, rts_threshold, "%d");
@@ -216,7 +217,8 @@ static struct class_device_attribute ieee80211_class_dev_attrs[] = {
__ATTR(channel, S_IRUGO, ieee80211_local_show_channel, NULL),
__ATTR(frequency, S_IRUGO, ieee80211_local_show_frequency, NULL),
__ATTR(radar_detect, S_IRUGO, ieee80211_local_show_radar_detect, NULL),
- __ATTR(antenna_sel, S_IRUGO, ieee80211_local_show_antenna_sel, NULL),
+ __ATTR(antenna_sel_tx, S_IRUGO, ieee80211_local_show_antenna_sel_tx, NULL),
+ __ATTR(antenna_sel_rx, S_IRUGO, ieee80211_local_show_antenna_sel_rx, NULL),
__ATTR(bridge_packets, S_IRUGO, ieee80211_local_show_bridge_packets, NULL),
__ATTR(key_tx_rx_threshold, S_IRUGO, ieee80211_local_show_key_tx_rx_threshold, NULL),
__ATTR(rts_threshold, S_IRUGO, ieee80211_local_show_rts_threshold, NULL),
diff --git a/net/d80211/rc80211_simple.c b/net/d80211/rc80211_simple.c
index 3634d00..bdf93a8 100644
--- a/net/d80211/rc80211_simple.c
+++ b/net/d80211/rc80211_simple.c
@@ -137,12 +137,13 @@ static void rate_control_simple_tx_status(void *priv, struct net_device *dev,
srctrl = sta->rate_ctrl_priv;
srctrl->tx_num_xmit++;
if (status->excessive_retries) {
- sta->antenna_sel = sta->antenna_sel == 1 ? 2 : 1;
+ sta->antenna_sel_tx = sta->antenna_sel_tx == 1 ? 2 : 1;
+ sta->antenna_sel_rx = sta->antenna_sel_rx == 1 ? 2 : 1;
if (local->sta_antenna_sel == STA_ANTENNA_SEL_SW_CTRL_DEBUG) {
printk(KERN_DEBUG "%s: " MAC_FMT " TX antenna --> %d "
- "(@%lu)\n",
+ "RX antenna --> %d (@%lu)\n",
dev->name, MAC_ARG(hdr->addr1),
- sta->antenna_sel, jiffies);
+ sta->antenna_sel_tx, sta->antenna_sel_rx, jiffies);
}
srctrl->tx_num_failures++;
sta->tx_retry_failed++;
diff --git a/net/d80211/sta_info.h b/net/d80211/sta_info.h
index ad000a2..4622902 100644
--- a/net/d80211/sta_info.h
+++ b/net/d80211/sta_info.h
@@ -89,7 +89,8 @@ struct sta_info {
int channel_use;
int channel_use_raw;
- int antenna_sel;
+ int antenna_sel_tx;
+ int antenna_sel_rx;
int key_idx_compression; /* key table index for compression and TX
next prev parent reply other threads:[~2007-02-21 16:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-21 16:02 [PATCH 1/3] d80211: Split antenna selection into TX and RX antenna Ivo van Doorn
2007-02-21 16:12 ` Michael Buesch
2007-02-21 16:27 ` Ivo van Doorn [this message]
2007-02-21 16:36 ` Michael Buesch
2007-02-21 17:06 ` Ivo van Doorn
2007-02-23 16:53 ` Jiri Benc
2007-02-22 18:46 ` Dan Williams
2007-02-22 18:45 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200702211727.55015.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=jbenc@suse.cz \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mb@bu3sch.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.