All of lore.kernel.org
 help / color / mirror / Atom feed
From: divy@chelsio.com
To: jeff@garzik.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	swise@opengridcomputing.com
Subject: [PATCH 2/7] cxgb3 - private ioctl cleanup
Date: Thu, 22 Feb 2007 03:59:25 -0800	[thread overview]
Message-ID: <20070222115925.10001.61276.stgit@localhost.localdomain> (raw)

From: Divy Le Ray <divy@chelsio.com>

Clean up some private ioctls.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
---

 drivers/net/cxgb3/cxgb3_ioctl.h |   21 ++++-------------
 drivers/net/cxgb3/cxgb3_main.c  |   48 +++------------------------------------
 2 files changed, 9 insertions(+), 60 deletions(-)

diff --git a/drivers/net/cxgb3/cxgb3_ioctl.h b/drivers/net/cxgb3/cxgb3_ioctl.h
index a942818..42d4bf6 100644
--- a/drivers/net/cxgb3/cxgb3_ioctl.h
+++ b/drivers/net/cxgb3/cxgb3_ioctl.h
@@ -36,28 +36,17 @@
  * Ioctl commands specific to this driver.
  */
 enum {
-	CHELSIO_SETREG = 1024,
-	CHELSIO_GETREG,
-	CHELSIO_SETTPI,
-	CHELSIO_GETTPI,
-	CHELSIO_GETMTUTAB,
+	CHELSIO_GETMTUTAB = 1024,
 	CHELSIO_SETMTUTAB,
-	CHELSIO_GETMTU,
-	CHELSIO_SET_PM,
-	CHELSIO_GET_PM,
-	CHELSIO_GET_TCAM,
-	CHELSIO_SET_TCAM,
-	CHELSIO_GET_TCB,
 	CHELSIO_GET_MEM,
 	CHELSIO_LOAD_FW,
-	CHELSIO_GET_PROTO,
-	CHELSIO_SET_PROTO,
 	CHELSIO_SET_TRACE_FILTER,
-	CHELSIO_SET_QSET_PARAMS,
 	CHELSIO_GET_QSET_PARAMS,
-	CHELSIO_SET_QSET_NUM,
+	CHELSIO_SET_QSET_PARAMS,
 	CHELSIO_GET_QSET_NUM,
-	CHELSIO_SET_PKTSCHED,
+	CHELSIO_SET_QSET_NUM,
+	CHELSIO_GET_PM,
+	CHELSIO_SET_PM,
 };
 
 struct ch_reg {
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 59f2b51..7ff834e 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1552,32 +1552,6 @@ static int cxgb_extension_ioctl(struct n
 		return -EFAULT;
 
 	switch (cmd) {
-	case CHELSIO_SETREG:{
-		struct ch_reg edata;
-
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		if (copy_from_user(&edata, useraddr, sizeof(edata)))
-			return -EFAULT;
-		if ((edata.addr & 3) != 0
-			|| edata.addr >= adapter->mmio_len)
-			return -EINVAL;
-		writel(edata.val, adapter->regs + edata.addr);
-		break;
-	}
-	case CHELSIO_GETREG:{
-		struct ch_reg edata;
-
-		if (copy_from_user(&edata, useraddr, sizeof(edata)))
-			return -EFAULT;
-		if ((edata.addr & 3) != 0
-			|| edata.addr >= adapter->mmio_len)
-			return -EINVAL;
-		edata.val = readl(adapter->regs + edata.addr);
-		if (copy_to_user(useraddr, &edata, sizeof(edata)))
-			return -EFAULT;
-		break;
-	}
 	case CHELSIO_SET_QSET_PARAMS:{
 		int i;
 		struct qset_params *q;
@@ -1841,10 +1815,10 @@ static int cxgb_extension_ioctl(struct n
 			return -EINVAL;
 
 		/*
-			* Version scheme:
-			* bits 0..9: chip version
-			* bits 10..15: chip revision
-			*/
+		 * Version scheme:
+		 * bits 0..9: chip version
+		 * bits 10..15: chip revision
+		 */
 		t.version = 3 | (adapter->params.rev << 10);
 		if (copy_to_user(useraddr, &t, sizeof(t)))
 			return -EFAULT;
@@ -1893,20 +1867,6 @@ static int cxgb_extension_ioctl(struct n
 						t.trace_rx);
 		break;
 	}
-	case CHELSIO_SET_PKTSCHED:{
-		struct ch_pktsched_params p;
-
-		if (!capable(CAP_NET_ADMIN))
-				return -EPERM;
-		if (!adapter->open_device_map)
-				return -EAGAIN;	/* uP and SGE must be running */
-		if (copy_from_user(&p, useraddr, sizeof(p)))
-				return -EFAULT;
-		send_pktsched_cmd(adapter, p.sched, p.idx, p.min, p.max,
-				  p.binding);
-		break;
-			
-	}
 	default:
 		return -EOPNOTSUPP;
 	}

             reply	other threads:[~2007-02-22 11:59 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-22 11:59 divy [this message]
2007-02-22 12:06 ` [PATCH 2/7] cxgb3 - private ioctl cleanup YOSHIFUJI Hideaki / 吉藤英明
2007-02-22 12:34   ` Divy Le Ray
2007-02-22 12:39     ` YOSHIFUJI Hideaki / 吉藤英明
2007-02-22 12:50       ` Divy Le Ray
2007-02-22 14:11         ` YOSHIFUJI Hideaki / 吉藤英明
  -- strict thread matches above, loose matches on Subject: below --
2007-02-25  0:43 divy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070222115925.10001.61276.stgit@localhost.localdomain \
    --to=divy@chelsio.com \
    --cc=jeff@garzik.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=swise@opengridcomputing.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.