From: Frank van Maarseveen <frankvm@frankvm.com>
To: linux-kernel@vger.kernel.org
Subject: 2.6.20*: PATA DMA timeout, hangs (2)
Date: Mon, 12 Mar 2007 12:24:14 +0100 [thread overview]
Message-ID: <20070312112414.GA12265@janus> (raw)
In-Reply-To: <20070312085447.GA10955@janus>
On Mon, Mar 12, 2007 at 09:54:47AM +0100, Frank van Maarseveen wrote:
>
> 2.6.19 is ok, 2.6.20.[12] hangs from the moment DMA is turned on (hdparm
> -d 1 /dev/hda):
>
> hda: dma_timer_expiry: dma status == 0x20
> hda: DMA timeout retry
> hda: timeout waiting for DMA
> hda: status error: status=0x58 {
> DriveReady
> SeekComplete
> DataRequest
> }
I have a totally different PATA based system (P4 HT) with similar symptoms
except that it seem to recover by switching DMA off during boot after
5 errors:
hda: dma_timer_expiry: dma status == 0x20
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: dma_timer_expiry: dma status == 0x20
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: dma_timer_expiry: dma status == 0x20
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: dma_timer_expiry: dma status == 0x20
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: dma_timer_expiry: dma status == 0x20
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
So in this case it doesn't hang but is not really usable either.
lspci:
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
02:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
This system has SATA but there's only one PATA disk
--
Frank
next prev parent reply other threads:[~2007-03-12 11:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-12 8:54 2.6.20*: PATA DMA timeout, hangs Frank van Maarseveen
2007-03-12 11:24 ` Frank van Maarseveen [this message]
2007-03-12 12:07 ` 2.6.20*: PATA DMA timeout, hangs (2) Alistair John Strachan
2007-03-12 13:25 ` Frank van Maarseveen
2007-03-12 13:52 ` Alistair John Strachan
2007-03-19 8:22 ` Tejun Heo
2007-03-12 12:21 ` Bartlomiej Zolnierkiewicz
2007-03-12 12:40 ` Frank van Maarseveen
2007-03-12 20:40 ` Bartlomiej Zolnierkiewicz
2007-03-13 9:19 ` Frank van Maarseveen
2007-03-13 11:04 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070312112414.GA12265@janus \
--to=frankvm@frankvm.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.