From: Folkert van Heusden <folkert@vanheusden.com>
To: linux-kernel@vger.kernel.org
Subject: [2.6.20] BUG: workqueue leaked lock
Date: Tue, 13 Mar 2007 17:50:14 +0100 [thread overview]
Message-ID: <20070313165014.GE31960@vanheusden.com> (raw)
...
[ 1756.728209] BUG: workqueue leaked lock or atomic: nfsd4/0x00000000/3577
[ 1756.728271] last function: laundromat_main+0x0/0x69 [nfsd]
[ 1756.728392] 2 locks held by nfsd4/3577:
[ 1756.728435] #0: (client_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 1756.728679] #1: (&inode->i_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 1756.728923] [<c1003d57>] show_trace_log_lvl+0x1a/0x30
[ 1756.729015] [<c1003d7f>] show_trace+0x12/0x14
[ 1756.729103] [<c1003e79>] dump_stack+0x16/0x18
[ 1756.729187] [<c102c2e8>] run_workqueue+0x167/0x170
[ 1756.729276] [<c102c437>] worker_thread+0x146/0x165
[ 1756.729368] [<c102f797>] kthread+0x97/0xc4
[ 1756.729456] [<c1003bdb>] kernel_thread_helper+0x7/0x10
[ 1756.729547] =======================
[ 1792.436492] svc: unknown version (0 for prog 100003, nfsd)
[ 1846.683648] BUG: workqueue leaked lock or atomic: nfsd4/0x00000000/3577
[ 1846.683701] last function: laundromat_main+0x0/0x69 [nfsd]
[ 1846.683832] 2 locks held by nfsd4/3577:
[ 1846.683885] #0: (client_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 1846.683980] #1: (&inode->i_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 1846.683988] [<c1003d57>] show_trace_log_lvl+0x1a/0x30
[ 1846.683994] [<c1003d7f>] show_trace+0x12/0x14
[ 1846.683997] [<c1003e79>] dump_stack+0x16/0x18
[ 1846.684001] [<c102c2e8>] run_workqueue+0x167/0x170
[ 1846.684006] [<c102c437>] worker_thread+0x146/0x165
[ 1846.684012] [<c102f797>] kthread+0x97/0xc4
[ 1846.684023] [<c1003bdb>] kernel_thread_helper+0x7/0x10
[ 1846.684027] =======================
[ 1936.638930] BUG: workqueue leaked lock or atomic: nfsd4/0x00000000/3577
[ 1936.638992] last function: laundromat_main+0x0/0x69 [nfsd]
[ 1936.639141] 2 locks held by nfsd4/3577:
[ 1936.639195] #0: (client_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 1936.639292] #1: (&inode->i_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 1936.639301] [<c1003d57>] show_trace_log_lvl+0x1a/0x30
[ 1936.639306] [<c1003d7f>] show_trace+0x12/0x14
[ 1936.639311] [<c1003e79>] dump_stack+0x16/0x18
[ 1936.639314] [<c102c2e8>] run_workqueue+0x167/0x170
[ 1936.639321] [<c102c437>] worker_thread+0x146/0x165
[ 1936.639325] [<c102f797>] kthread+0x97/0xc4
[ 1936.639329] [<c1003bdb>] kernel_thread_helper+0x7/0x10
[ 1936.639332] =======================
this repeats several times
also:
[ 137.324255] =======================================================
[ 137.324359] [ INFO: possible circular locking dependency detected ]
[ 137.324412] 2.6.20 #2
[ 137.324457] -------------------------------------------------------
[ 137.324510] tor/4857 is trying to acquire lock:
[ 137.324559] (tty_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 137.324765]
[ 137.324766] but task is already holding lock:
[ 137.324859] (&s->s_dquot.dqptr_sem){----}, at: [<c1099403>] dquot_alloc_space+0x50/0x189
[ 137.325067]
[ 137.325069] which lock already depends on the new lock.
[ 137.325071]
[ 137.325206]
[ 137.325208] the existing dependency chain (in reverse order) is:
[ 137.325300]
[ 137.325301] -> #4 (&s->s_dquot.dqptr_sem){----}:
[ 137.325501] [<c10354b8>] check_prev_add+0x154/0x206
[ 137.325852] [<c10355d4>] check_prevs_add+0x6a/0xd5
[ 137.326197] [<c1036dd2>] __lock_acquire+0x61c/0xa05
[ 137.326538] [<c1037624>] lock_acquire+0x62/0x81
[ 137.326887] [<c1032b5f>] down_read+0x2b/0x3d
[ 137.327241] [<c1099403>] dquot_alloc_space+0x50/0x189
[ 137.327588] [<c10a98e6>] ext3_new_blocks+0x44b/0x5a2
[ 137.327935] [<c10abe78>] ext3_alloc_blocks+0x40/0xdf
[ 137.328280] [<c10abf67>] ext3_alloc_branch+0x50/0x21b
[ 137.328622] [<c10ac445>] ext3_get_blocks_handle+0x1b8/0x367
[ 137.328980] [<c10ac76e>] ext3_getblk+0x97/0x228
[ 137.329330] [<c10ac919>] ext3_bread+0x1a/0x78
[ 137.329672] [<c10b1bc2>] ext3_mkdir+0xf4/0x270
[ 137.330022] [<c1072a6a>] vfs_mkdir+0xb3/0x161
[ 137.330368] [<c1072ba4>] sys_mkdirat+0x8c/0xc4
[ 137.330714] [<c1072bfc>] sys_mkdir+0x20/0x22
[ 137.331063] [<c1002f78>] syscall_call+0x7/0xb
[ 137.331406] [<ffffffff>] 0xffffffff
[ 137.331771]
[ 137.331772] -> #3 (&ei->truncate_mutex){--..}:
[ 137.331979] [<c10354b8>] check_prev_add+0x154/0x206
[ 137.332332] [<c10355d4>] check_prevs_add+0x6a/0xd5
[ 137.332676] [<c1036dd2>] __lock_acquire+0x61c/0xa05
[ 137.333025] [<c1037624>] lock_acquire+0x62/0x81
[ 137.333370] [<c1205c09>] __mutex_lock_slowpath+0x75/0x28c
[ 137.333930] [<c1205b88>] mutex_lock+0x8/0xa
[ 137.334271] [<c10ae14f>] ext3_truncate+0x170/0x468
[ 137.334613] [<c1058e72>] vmtruncate+0xa6/0x116
[ 137.334949] [<c107d587>] inode_setattr+0x145/0x16c
[ 137.334613] [<c1058e72>] vmtruncate+0xa6/0x116
[ 137.334949] [<c107d587>] inode_setattr+0x145/0x16c
[ 137.335286] [<c10af071>] ext3_setattr+0x150/0x22f
[ 137.335627] [<c107d909>] notify_change+0x35b/0x392
[ 137.335968] [<c10679d2>] do_truncate+0x52/0x75
[ 137.336305] [<c1071f5e>] may_open+0x1ec/0x231
[ 137.336642] [<c107211c>] open_namei+0xda/0x59b
[ 137.336975] [<c106863a>] do_filp_open+0x2c/0x53
[ 137.337310] [<c106896f>] do_sys_open+0x52/0xd8
[ 137.337645] [<c1068a11>] sys_open+0x1c/0x1e
[ 137.337980] [<c1002f78>] syscall_call+0x7/0xb
[ 137.338315] [<ffffffff>] 0xffffffff
[ 137.338665]
[ 137.338666] -> #2 (&inode->i_alloc_sem){--..}:
[ 137.338864] [<c10354b8>] check_prev_add+0x154/0x206
[ 137.339200] [<c10355d4>] check_prevs_add+0x6a/0xd5
[ 137.339535] [<c1036dd2>] __lock_acquire+0x61c/0xa05
[ 137.339874] [<c1037624>] lock_acquire+0x62/0x81
[ 137.340207] [<c1032bf5>] down_write+0x2b/0x45
[ 137.340545] [<c107d890>] notify_change+0x2e2/0x392
[ 137.340886] [<c10679d2>] do_truncate+0x52/0x75
[ 137.341222] [<c1071f5e>] may_open+0x1ec/0x231
[ 137.341557] [<c107211c>] open_namei+0xda/0x59b
[ 137.341898] [<c106863a>] do_filp_open+0x2c/0x53
[ 137.342236] [<c106896f>] do_sys_open+0x52/0xd8
[ 137.342572] [<c1068a11>] sys_open+0x1c/0x1e
[ 137.343109] [<c1002f78>] syscall_call+0x7/0xb
[ 137.343444] [<ffffffff>] 0xffffffff
[ 137.343792]
[ 137.343793] -> #1 (&sysfs_inode_imutex_key){--..}:
[ 137.343988] [<c10354b8>] check_prev_add+0x154/0x206
[ 137.344320] [<c10355d4>] check_prevs_add+0x6a/0xd5
[ 137.344655] [<c1036dd2>] __lock_acquire+0x61c/0xa05
[ 137.344986] [<c1037624>] lock_acquire+0x62/0x81
[ 137.345321] [<c1205c09>] __mutex_lock_slowpath+0x75/0x28c
[ 137.345658] [<c1205b88>] mutex_lock+0x8/0xa
[ 137.345991] [<c10a5447>] sysfs_hash_and_remove+0x43/0x11c
[ 137.346328] [<c10a5ef7>] sysfs_remove_file+0xd/0x12
[ 137.346660] [<c114b00c>] device_remove_file+0x32/0x44
[ 137.346992] [<c114b6d9>] device_del+0x174/0x1d2
[ 137.347325] [<c114b742>] device_unregister+0xb/0x15
[ 137.347661] [<c114b93d>] device_destroy+0x8d/0x9a
[ 137.347994] [<c1137a38>] vcs_remove_sysfs+0x1c/0x38
[ 137.348328] [<c113e0d8>] con_close+0x5e/0x6b
[ 137.348661] [<c1130103>] release_dev+0x4c4/0x6ce
[ 137.348999] [<c113077b>] tty_release+0x12/0x1c
[ 137.349332] [<c106a471>] __fput+0x145/0x16e
[ 137.349671] [<c106a32a>] fput+0x19/0x1b
[ 137.350004] [<c1068a92>] filp_close+0x3c/0x75
[ 137.350338] [<c1068b34>] sys_close+0x69/0xb4
[ 137.350671] [<c1002f78>] syscall_call+0x7/0xb
[ 137.351003] [<ffffffff>] 0xffffffff
[ 137.351352]
[ 137.351354] -> #0 (tty_mutex){--..}:
[ 137.351544] [<c1035398>] check_prev_add+0x34/0x206
[ 137.352086] [<c10355d4>] check_prevs_add+0x6a/0xd5
[ 137.352421] [<c1036dd2>] __lock_acquire+0x61c/0xa05
[ 137.352759] [<c1037624>] lock_acquire+0x62/0x81
[ 137.353090] [<c1205c09>] __mutex_lock_slowpath+0x75/0x28c
[ 137.353426] [<c1205b88>] mutex_lock+0x8/0xa
[ 137.353761] [<c1098d79>] print_warning+0x8c/0x15d
[ 137.354096] [<c1099537>] dquot_alloc_space+0x184/0x189
[ 137.354434] [<c10a98e6>] ext3_new_blocks+0x44b/0x5a2
[ 137.354773] [<c10abe78>] ext3_alloc_blocks+0x40/0xdf
[ 137.355109] [<c10abf67>] ext3_alloc_branch+0x50/0x21b
[ 137.355446] [<c10ac445>] ext3_get_blocks_handle+0x1b8/0x367
[ 137.355783] [<c10ac66c>] ext3_get_block+0x78/0xe3
[ 137.356121] [<c108a239>] __block_prepare_write+0x168/0x3fd
[ 137.356459] [<c108ad10>] block_prepare_write+0x28/0x3b
[ 137.356800] [<c10acbcd>] ext3_prepare_write+0x3f/0x18d
[ 137.357138] [<c104dbe5>] generic_file_buffered_write+0x197/0x5e6
[ 137.357474] [<c104e2e2>] __generic_file_aio_write_nolock+0x2ae/0x5ad
[ 137.357817] [<c104e6ea>] generic_file_aio_write+0x58/0xc4
[ 137.358156] [<c10aa723>] ext3_file_write+0x2d/0xba
[ 137.357817] [<c104e6ea>] generic_file_aio_write+0x58/0xc4
[ 137.358156] [<c10aa723>] ext3_file_write+0x2d/0xba
[ 137.358495] [<c1069441>] do_sync_write+0xc7/0x116
[ 137.358838] [<c1069612>] vfs_write+0x182/0x187
[ 137.359176] [<c10696b8>] sys_write+0x3d/0x64
[ 137.359513] [<c1002f78>] syscall_call+0x7/0xb
[ 137.359848] [<ffffffff>] 0xffffffff
[ 137.360200]
[ 137.360202] other info that might help us debug this:
[ 137.360204]
[ 137.360335] 3 locks held by tor/4857:
[ 137.360382] #0: (&inode->i_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 137.360625] #1: (&ei->truncate_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 137.361072] #2: (&s->s_dquot.dqptr_sem){----}, at: [<c1099403>] dquot_alloc_space+0x50/0x189
[ 137.361313]
[ 137.361314] stack backtrace:
[ 137.361401] [<c1003d57>] show_trace_log_lvl+0x1a/0x30
[ 137.361488] [<c1003d7f>] show_trace+0x12/0x14
[ 137.361571] [<c1003e79>] dump_stack+0x16/0x18
[ 137.361663] [<c1034d6d>] print_circular_bug_tail+0x6f/0x71
[ 137.361752] [<c1035398>] check_prev_add+0x34/0x206
[ 137.361838] [<c10355d4>] check_prevs_add+0x6a/0xd5
[ 137.362786] [<c1036dd2>] __lock_acquire+0x61c/0xa05
[ 137.362877] [<c1037624>] lock_acquire+0x62/0x81
[ 137.362960] [<c1205c09>] __mutex_lock_slowpath+0x75/0x28c
[ 137.363047] [<c1205b88>] mutex_lock+0x8/0xa
[ 137.363132] [<c1098d79>] print_warning+0x8c/0x15d
[ 137.363217] [<c1099537>] dquot_alloc_space+0x184/0x189
[ 137.363302] [<c10a98e6>] ext3_new_blocks+0x44b/0x5a2
[ 137.363391] [<c10abe78>] ext3_alloc_blocks+0x40/0xdf
[ 137.363476] [<c10abf67>] ext3_alloc_branch+0x50/0x21b
[ 137.363561] [<c10ac445>] ext3_get_blocks_handle+0x1b8/0x367
[ 137.363650] [<c10ac66c>] ext3_get_block+0x78/0xe3
[ 137.363735] [<c108a239>] __block_prepare_write+0x168/0x3fd
[ 137.363822] [<c108ad10>] block_prepare_write+0x28/0x3b
[ 137.363908] [<c10acbcd>] ext3_prepare_write+0x3f/0x18d
[ 137.363996] [<c104dbe5>] generic_file_buffered_write+0x197/0x5e6
[ 137.364084] [<c104e2e2>] __generic_file_aio_write_nolock+0x2ae/0x5ad
[ 137.364171] [<c104e6ea>] generic_file_aio_write+0x58/0xc4
[ 137.364254] [<c10aa723>] ext3_file_write+0x2d/0xba
[ 137.364340] [<c1069441>] do_sync_write+0xc7/0x116
[ 137.364425] [<c1069612>] vfs_write+0x182/0x187
[ 137.364511] [<c10696b8>] sys_write+0x3d/0x64
[ 137.364595] [<c1002f78>] syscall_call+0x7/0xb
[ 137.364682] =======================
[ 137.471738] BUG: workqueue leaked lock or atomic: nfsd4/0x00000000/3577
[ 137.471812] last function: laundromat_main+0x0/0x69 [nfsd]
[ 137.471923] 2 locks held by nfsd4/3577:
[ 137.471971] #0: (client_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 137.472209] #1: (&inode->i_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 137.472445] [<c1003d57>] show_trace_log_lvl+0x1a/0x30
[ 137.472528] [<c1003d7f>] show_trace+0x12/0x14
[ 137.472613] [<c1003e79>] dump_stack+0x16/0x18
[ 137.472695] [<c102c2e8>] run_workqueue+0x167/0x170
[ 137.472779] [<c102c437>] worker_thread+0x146/0x165
[ 137.472861] [<c102f797>] kthread+0x97/0xc4
[ 137.472943] [<c1003bdb>] kernel_thread_helper+0x7/0x10
[ 137.473026] =======================
Folkert van Heusden
--
MultiTail is a versatile tool for watching logfiles and output of
commands. Filtering, coloring, merging, diff-view, etc.
http://www.vanheusden.com/multitail/
----------------------------------------------------------------------
Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com
next reply other threads:[~2007-03-13 16:53 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-13 16:50 Folkert van Heusden [this message]
2007-03-15 19:06 ` [2.6.20] BUG: workqueue leaked lock Andrew Morton
2007-03-15 19:17 ` Folkert van Heusden
2007-03-16 14:49 ` Jarek Poplawski
2007-03-20 11:17 ` dquot.c: possible circular locking " Jarek Poplawski
2007-03-20 11:22 ` Jarek Poplawski
2007-03-20 11:31 ` Jarek Poplawski
2007-03-20 12:19 ` Jan Kara
2007-03-20 13:35 ` Arjan van de Ven
2007-03-20 14:21 ` Jan Kara
2007-03-20 14:18 ` Arjan van de Ven
2007-03-20 13:44 ` Jarek Poplawski
2007-03-20 14:00 ` Jan Kara
2007-03-16 8:41 ` Peter Zijlstra
2007-03-16 11:39 ` Andrew Morton
2007-03-19 6:24 ` Neil Brown
2007-03-20 9:37 ` [PATCH] " Jarek Poplawski
2007-03-20 16:07 ` Oleg Nesterov
2007-03-21 8:05 ` Jarek Poplawski
2007-03-21 14:46 ` Oleg Nesterov
2007-03-21 15:16 ` Jarek Poplawski
2007-03-21 15:17 ` Folkert van Heusden
2007-03-21 15:29 ` Oleg Nesterov
2007-03-21 18:16 ` Oleg Nesterov
2007-03-22 6:11 ` [PATCH] lockdep: lockdep_depth vs. debug_locks " Jarek Poplawski
2007-03-22 6:28 ` Andrew Morton
2007-03-22 7:06 ` Jarek Poplawski
2007-03-22 7:23 ` Jarek Poplawski
2007-03-22 7:13 ` Jarek Poplawski
2007-03-22 8:26 ` Jarek Poplawski
2007-03-22 6:57 ` [PATCH] lockdep: debug_show_all_locks & debug_show_held_locks vs. debug_locks Jarek Poplawski
2007-03-22 7:23 ` Peter Zijlstra
2007-03-22 9:06 ` Ingo Molnar
2007-03-22 7:22 ` [PATCH] lockdep: lockdep_depth vs. debug_locks Re: [2.6.20] BUG: workqueue leaked lock Peter Zijlstra
2007-03-22 9:06 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070313165014.GE31960@vanheusden.com \
--to=folkert@vanheusden.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.