From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mo-p07-ob.rzone.de (mo-p07-ob.rzone.de [81.169.146.190]) by ozlabs.org (Postfix) with ESMTP id 419C3DDECA for ; Sat, 17 Mar 2007 01:38:31 +1100 (EST) From: Stefan Roese To: "Bart Van Assche" Subject: Re: + ocotea-board-ntpd-complains-that-the-frequency-error-exceeds-the-tolerance.patch added to -mm tree Date: Fri, 16 Mar 2007 15:40:42 +0100 References: <200703161052.l2GAqIRV009441@shell0.pdx.osdl.net> In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Message-Id: <200703161540.44334.sr@denx.de> Cc: "linuxppc-dev@ozlabs.org ML" , Paul Mackerras , Andrew Morton List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Friday 16 March 2007 15:34, Bart Van Assche wrote: > > I asked Stefan & Josh to look at this and Stefan believes its a > > 33.33Mhz clock. So should this really be 33330000? > > I have measured the clock frequency on the two Ocotea boards I have on > my desk, and both have a clock crystal of 33.3 MHz, not 33.33 MHz. > What I don't know is whether the same clock crystal is mounted on all > Ocotea boards. Hmmm. From what I could read from the schematics, it should be 33.33MHz. But here is always a gray zone. I'll ask AMCC, what is equipped right now. Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk Office: Kirchenstr. 5, D-82194 Groebenzell, Germany =====================================================================