From: khali@linux-fr.org (Jean Delvare)
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH] ad7418 driver
Date: Wed, 21 Mar 2007 15:24:45 +0000 [thread overview]
Message-ID: <20070321162445.653fcec6.khali@linux-fr.org> (raw)
In-Reply-To: <20061112153724.3e630d32@inspiron>
Hi Alessandro,
On Mon, 19 Mar 2007 23:35:33 +0100, Alessandro Zummo wrote:
> On Sun, 24 Dec 2006 14:53:59 +0100, Jean Delvare wrote:
> > After reading the datasheet once more, I realize I was confused here:
> > you actually support the AD7417 (4 voltage inputs), and not the AD7418
> > (1 voltage input). My comment still holds, though.
>
> I took a bit of time and started applying your suggestions.
> I tested the driver against both 18 and 17 and they look the same.
> I haven't found a way to distinguish between them.
Well, what does the AD7418 return when you read a non-existing channel?
If these devices are used in embedded designs, you will be able to use
the new code contributed by David Brownell to explicitly instantiate
the devices, without hardware probing. This will solve the problem.
--
Jean Delvare
prev parent reply other threads:[~2007-03-21 15:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-12 14:37 [lm-sensors] [PATCH] ad7418 driver Alessandro Zummo
2006-12-24 11:41 ` Jean Delvare
2006-12-24 13:53 ` Jean Delvare
2006-12-24 14:09 ` Jean Delvare
2007-03-21 15:24 ` Jean Delvare [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070321162445.653fcec6.khali@linux-fr.org \
--to=khali@linux-fr.org \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.