From: Dominique Michel <dominique.michel@citycable.ch>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: 2.6.21-rc3-rt0 hang randomely + usb can't set config #1, error -62
Date: Sun, 25 Mar 2007 09:05:52 +0200 [thread overview]
Message-ID: <20070325090552.4f759b68@localhost> (raw)
Hi all,
My system hang randomly with a 2.6.21-rc3-rt0. I also have a
2.6.19.1-rt15 that is working fine. I googled a lot and find at I missed the
shift to the APIC timer with such rt kernels with the 2.6.19-rt15. I try to
enable it in the 2.6.21-rc3-rt0, but it continue to hang from time to time.
/proc/version:
Linux version 2.6.21-rc3-rt0 (root@localhost) (gcc version 4.1.1 (Gentoo
4.1.1-r3)) #1 PREEMPT Fri Mar 23 15:48:12 CET 2007
I get no Oops.
ver_linux:
Linux localhost 2.6.21-rc3-rt0 #1 PREEMPT Fri Mar 23 15:48:12 CET 2007 i686
Intel(R) Pentium(R) 4 CPU 2.40GHz GenuineIntel GNU/Linux
Gnu C 4.1.1
Gnu make 3.81
binutils 2.16.1
util-linux 2.12r
mount 2.12r
module-init-tools 3.2.2
e2fsprogs 1.39
reiserfsprogs 3.6.19
xfsprogs 2.8.11
Linux C Library > libc.2.5
Dynamic linker (ldd) 2.5
Procps 3.2.7
Net-tools 1.60
Kbd 1.12
Sh-utils 6.4
udev 104
Modules Loaded af_packet snd_seq_midi snd_emu10k1_synth snd_emux_synth
snd_seq_midi_emul snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_seq_oss
snd_virmidi snd_seq_virmidi snd_seq_midi_event snd_seq sd_mod sg genrtc lp ipv6
realcap commoncap mousedev usbhid snd_usb_audio snd_usb_lib pwc eth1394
usb_storage scsi_mod psmouse serio_raw parport_pc parport tuner bttv video_buf
ir_common compat_ioctl32 i2c_algo_bit btcx_risc tveeprom videodev v4l2_common
v4l1_compat rtc_cmos rtc_core rtc_lib snd_emu10k1 snd_rawmidi firmware_class
snd_ac97_codec ac97_bus snd_pcm snd_seq_device snd_timer snd_page_alloc
snd_util_mem snd_hwdep snd soundcore pcspkr emu10k1_gp gameport sis_agp ide_cd
cdrom ohci1394 ieee1394 ehci_hcd sis900 mii ohci_hcd usbcore i2c_sis96x
i2c_core unix
Note: all the modules are from the kernel, no external modules at all.
/proc/cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.40GHz
stepping : 7
cpu MHz : 2400.260
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips :
4801.53 clflush size : 64
/proc/modules:
af_packet 16548 2 - Live 0xf8c4c000
snd_seq_midi 5664 0 - Live 0xf8c19000
snd_emu10k1_synth 5120 0 - Live 0xf8c11000
snd_emux_synth 25088 1 snd_emu10k1_synth, Live 0xf8c44000
snd_seq_midi_emul 4480 1 snd_emux_synth, Live 0xf8c0e000
snd_pcm_oss 31904 0 - Live 0xf8c3b000
snd_mixer_oss 12672 1 snd_pcm_oss, Live 0xf8c14000
snd_seq_dummy 2180 0 - Live 0xf8be8000
snd_seq_oss 22912 0 - Live 0xf8c27000
snd_virmidi 3136 0 - Live 0xf8bfa000
snd_seq_virmidi 4608 2 snd_emux_synth,snd_virmidi, Live 0xf8bea000
snd_seq_midi_event 3968 3 snd_seq_midi,snd_seq_oss,snd_seq_virmidi, Live
0xf8b96000 snd_seq 32400 12
snd_seq_midi,snd_emux_synth,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_virmidi,snd_seq_midi_event,
Live 0xf8c1e000 sd_mod 15816 4 - Live 0xf8bed000 sg 28216 0 - Live 0xf8bf2000
genrtc 6628 0 - Live 0xf8b91000
lp 9092 0 - Live 0xf8ba3000
ipv6 201440 14 - Live 0xf8c56000
realcap 3464 0 - Live 0xf8b94000
commoncap 3072 1 realcap, Live 0xf8aee000
snd_usb_audio 51296 0 - Live 0xf8c00000
snd_usb_lib 11136 1 snd_usb_audio, Live 0xf8b9f000
eth1394 14980 0 - Live 0xf8b72000
mousedev 8760 1 - Live 0xf8b63000
usbhid 20576 0 - Live 0xf8b98000
pwc 74496 0 - Live 0xf8ba7000
usb_storage 24964 3 - Live 0xf8b6a000
scsi_mod 100200 3 sd_mod,sg,usb_storage, Live 0xf8bbb000
parport_pc 26564 1 - Live 0xf8b87000
parport 26400 2 lp,parport_pc, Live 0xf8b7f000
psmouse 27912 0 - Live 0xf8b77000
serio_raw 4868 0 - Live 0xf8b67000
tuner 49192 0 - Live 0xf8b19000
bttv 161652 0 - Live 0xf8b30000
video_buf 15364 1 bttv, Live 0xf8b00000
ir_common 23556 1 bttv, Live 0xf8af9000
compat_ioctl32 768 2 pwc,bttv, Live 0xf8aec000
i2c_algo_bit 6152 1 bttv, Live 0xf8ae1000
btcx_risc 2952 1 bttv, Live 0xf8ae4000
tveeprom 12048 1 bttv, Live 0xf8ae8000
videodev 23680 2 pwc,bttv, Live 0xf8ad6000
v4l2_common 11136 3 tuner,bttv,videodev, Live 0xf8add000
v4l1_compat 13060 2 bttv,videodev, Live 0xf8ab8000
rtc_cmos 5908 0 - Live 0xf8ac0000
rtc_core 5448 1 rtc_cmos, Live 0xf8abd000
rtc_lib 2176 1 rtc_core, Live 0xf8963000
ide_cd 32672 0 - Live 0xf8acd000
cdrom 30016 1 ide_cd, Live 0xf8ac4000
ohci1394 29616 0 - Live 0xf8aa5000
ieee1394 63288 2 eth1394,ohci1394, Live 0xf8a69000
sis_agp 5892 1 - Live 0xf8926000
snd_emu10k1 107200 4 snd_emu10k1_synth, Live 0xf8993000
snd_rawmidi 15264 4 snd_seq_midi,snd_seq_virmidi,snd_usb_lib,snd_emu10k1, Live
0xf8967000 firmware_class 6400 2 bttv,snd_emu10k1, Live 0xf8921000
snd_ac97_codec 72736 1 snd_emu10k1, Live 0xf893b000
ac97_bus 1536 1 snd_ac97_codec, Live 0xf8924000
snd_pcm 47136 6 snd_pcm_oss,snd_usb_audio,snd_emu10k1,snd_ac97_codec, Live
0xf8951000 snd_seq_device 4748 8
snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,
Live 0xf88f7000 snd_timer 15644 3 snd_seq,snd_emu10k1,snd_pcm, Live 0xf8929000
snd_page_alloc 6408 2 snd_emu10k1,snd_pcm, Live 0xf88da000 snd_util_mem 2048 2
snd_emux_synth,snd_emu10k1, Live 0xf88dd000 snd_hwdep 6148 3
snd_emux_synth,snd_usb_audio,snd_emu10k1, Live 0xf88f0000 snd 32260 20
snd_emux_synth,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_virmidi,snd_seq_virmidi,snd_seq,snd_usb_audio,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_hwdep,
Live 0xf8932000 soundcore 4448 1 snd, Live 0xf88e1000 pcspkr 2072 0 - Live
0xf891f000 i2c_sis96x 4484 0 - Live 0xf88f4000
i2c_core 12584 5 tuner,bttv,i2c_algo_bit,tveeprom,i2c_sis96x, Live 0xf891a000
ehci_hcd 27276 0 - Live 0xf8912000
emu10k1_gp 2688 0 - Live 0xf88df000
gameport 9760 2 emu10k1_gp, Live 0xf88ea000
sis900 18048 0 - Live 0xf88e4000
mii 3328 1 sis900, Live 0xf88cb000
ohci_hcd 17028 0 - Live 0xf88d4000
usbcore 91212 8
snd_usb_audio,snd_usb_lib,usbhid,pwc,usb_storage,ehci_hcd,ohci_hcd, Live
0xf88fa000 unix 21296 374 - Live 0xf88cd000
/proc/ioports:
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0073 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:02.5
0170-0177 : ide1
01f0-01f7 : 0000:00:02.5
01f0-01f7 : ide0
0295-0296 : pnp 00:0c
0376-0376 : 0000:00:02.5
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : 0000:00:02.5
03f6-03f6 : ide0
0480-048f : pnp 00:02
0778-077a : parport0
0cf8-0cff : PCI conf1
9000-9007 : 0000:00:0a.1
9000-9007 : emu10k1-gp
9400-943f : 0000:00:0a.0
9400-943f : EMU10K1
9800-98ff : 0000:00:04.0
9800-98ff : sis900
b400-b40f : 0000:00:02.5
b400-b407 : ide0
b408-b40f : ide1
e400-e47f : pnp 00:02
e400-e403 : ACPI PM1a_EVT_BLK
e404-e405 : ACPI PM1a_CNT_BLK
e408-e40b : ACPI PM_TMR
e420-e423 : ACPI GPE0_BLK
e430-e433 : ACPI GPE1_BLK
e480-e4ff : pnp 00:02
e600-e61f : 0000:00:02.1
e600-e61f : pnp 00:02
e600-e61f : sis96x_smbus
/proc/iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cefff : Video ROM
000f0000-000fffff : System ROM
00100000-5fffbfff : System RAM
00100000-002c0009 : Kernel code
002c000a-0033a2af : Kernel data
5fffc000-5fffefff : ACPI Tables
5ffff000-5fffffff : ACPI Non-volatile Storage
e3000000-e3003fff : 0000:00:0a.2
e3800000-e38007ff : 0000:00:0a.2
e3800000-e38007ff : ohci1394
e4000000-e4000fff : 0000:00:04.0
e4000000-e4000fff : sis900
e4800000-e4800fff : 0000:00:03.3
e4800000-e4800fff : ehci_hcd
e5000000-e5000fff : 0000:00:03.2
e5000000-e5000fff : ohci_hcd
e5800000-e5800fff : 0000:00:03.1
e5800000-e5800fff : ohci_hcd
e6000000-e6000fff : 0000:00:03.0
e6000000-e6000fff : ohci_hcd
e7000000-e7ffffff : PCI Bus #01
e7000000-e7ffffff : 0000:01:00.0
e8000000-ebffffff : 0000:00:00.0
ee000000-ee000fff : 0000:00:0d.1
ee800000-ee800fff : 0000:00:0d.0
ee800000-ee800fff : bttv0
ef6c0000-ef6dffff : 0000:00:04.0
ef700000-febfffff : PCI Bus #01
ef7e0000-ef7fffff : 0000:01:00.0
ef800000-ef87ffff : 0000:01:00.0
f0000000-f7ffffff : 0000:01:00.0
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffee0000-ffefffff : pnp 00:02
ffff0000-ffffffff : reserved
lspci -vvv:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device 8086
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64-
64bit- FW- Rate=<none>
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge
(AGP) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF-
FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency:
64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e7000000-e7ffffff
Prefetchable memory behind bridge: ef700000-febfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset-
FastB2B-
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO]
(rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed
to IRQ 0 Region 4: I/O ports at e600 [size=32]
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80
[Master]) Subsystem: ASUSTeK Computer Inc. Unknown device 8087
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128
Interrupt: pin ? routed to IRQ 11
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170
(32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at
00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at
b400 [size=16]
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device
8087 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns
max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 3
Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device
8087 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns
max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 5
Region 0: Memory at e5800000 (32-bit, non-prefetchable) [size=4K]
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device
8087 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns
max), Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 6
Region 0: Memory at e5000000 (32-bit, non-prefetchable) [size=4K]
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
(prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 8087
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max)
Interrupt: pin D routed to IRQ 6
Region 0: Memory at e4800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast
Ethernet (rev 91) Subsystem: ASUSTeK Computer Inc. Unknown device 80a7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (13000ns
min, 2750ns max) Interrupt: pin A routed to IRQ 4
Region 0: I/O ports at 9800 [size=256]
Region 1: Memory at e4000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at ef6c0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
Subsystem: Creative Labs SB0240 Audigy 2 Platinum 6.1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min,
5000ns max) Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 9400 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
Subsystem: Creative Labs SB Audigy MIDI/Game Port
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32
Region 0: I/O ports at 9000 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
(prog-if 10 [OHCI]) Subsystem: Creative Labs SB Audigy FireWire Port
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min,
1000ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 4
Region 0: Memory at e3800000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e3000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture
(rev 11) Subsystem: Scion Corporation Unknown device 0012
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min,
10000ns max) Interrupt: pin A routed to IRQ 10
Region 0: Memory at ee800000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev
11) Subsystem: Scion Corporation Unknown device 0012
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min,
63750ns max) Interrupt: pin A routed to IRQ 10
Region 0: Memory at ee000000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti 4200]
(rev a3) (prog-if 00 [VGA]) Subsystem: Micro-Star International Co., Ltd.
Unknown device 8700 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1250ns min,
250ns max) Interrupt: pin A routed to IRQ 11
Region 0: Memory at e7000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at ef800000 (32-bit, prefetchable) [size=512K]
Expansion ROM at ef7e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64-
64bit- FW- Rate=<none>
/proc/scsi/scsi:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SAMSUNG Model: SP2014N Rev: VC10
Type: Direct-Access ANSI SCSI revision: 00
####################
I don't see anything wrong in the above messages, but dmesg found more iomem
could not be reserved messages as with the 2.6.19, and also a usb error (I get
the same with the 2.6.19-rt15):
es, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP 000F5810, 0014 (r0 ASUS )
ACPI: RSDT 5FFFC000, 002C (r1 ASUS P4S8X 42302E31 MSFT 31313031)
ACPI: FACP 5FFFC0BC, 0074 (r1 ASUS P4S8X 42302E31 MSFT 31313031)
ACPI: DSDT 5FFFC130, 2A21 (r1 ASUS P4S8X 1000 MSFT 100000B)
ACPI: FACS 5FFFF000, 0040
ACPI: T��_ 5FFFC02C, 0028 (r1 ASUS P4S8X 42302E31 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Built 1 zonelists. Total pages: 390141
Kernel command line: root=/dev/hdb1 ro X_DRIVER=nv
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
WARNING: experimental RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2400.260 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1555944k/1572848k available (1792k kernel code, 15860k reserved, 488k
data, 184k init, 655344k highmem) virtual kernel memory layout:
fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc033e000 - 0xc036c000 ( 184 kB)
.data : 0xc02c000a - 0xc033a2b0 ( 488 kB)
.text : 0xc0100000 - 0xc02c000a (1792 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4801.53 BogoMIPS (lpj=2400765)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400
00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00000400
00000000 00000000 Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0e78)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf11b0, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
0000:00:02.5: trying to change BAR0 from D800 to 01F0
0000:00:02.5: trying to change BAR1 from D400 to 03F4
0000:00:02.5: trying to change BAR2 from D000 to 0170
0000:00:02.5: trying to change BAR3 from B800 to 0374
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
######################## ???
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0x5fffffff could not be reserved
pnp: 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
pnp: 00:02: ioport range 0xe400-0xe47f has been reserved
pnp: 00:02: ioport range 0xe480-0xe4ff has been reserved
pnp: 00:02: ioport range 0xe600-0xe61f has been reserved
Time: tsc clocksource has been installed.
pnp: 00:02: ioport range 0x480-0x48f has been reserved
pnp: 00:02: iomem range 0xffee0000-0xffefffff has been reserved
pnp: 00:03: iomem range 0xfffe0000-0xffffffff could not be reserved
pnp: 00:0c: ioport range 0x295-0x296 has been reserved
PCI: Bridge: 0000:00:01.0
############### ???
IO window: disabled.
MEM window: e7000000-e7ffffff
PREFETCH window: ef700000-febfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
TCP bind hash table entries: 65536 (order: 8, 1835008 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 1 RAM disks of 12228K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.5[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11 SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: IC35L040AVER07-0, ATA DISK drive
hdb: IBM-DTLA-307030, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: DVD-RW IDE1004, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 >
hdb: max request size: 128KiB
hdb: 60036480 sectors (30738 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(100)
hdb: cache flushes not supported
hdb: hdb1
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
TCP cubic registered
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input0
ReiserFS: hdb1: found reiserfs format "3.6" with standard journal
ReiserFS: hdb1: using ordered data mode
ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdb1: checking transaction log (hdb1) ReiserFS: hdb1: Using r5 hash
to sort names VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 184k freed
NET: Registered protocol family 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 3 (level, low) -> IRQ
3 ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 3, io mem 0xe6000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 5 (level, low) -> IRQ
5 ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 5, io mem 0xe5800000
sis900.c: v1.08.10 Apr. 2 2006
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI Interrupt 0000:00:03.2[C] -> Link [LNKG] -> GSI 6 (level, low) -> IRQ
6 ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
input: PC Speaker as /class/input/input1
ohci_hcd 0000:00:03.2: irq 6, io mem 0xe5000000
usb 1-2: new low speed USB device using ohci_hcd and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 4 (level, low) -> IRQ
4 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 4, 00:e0:18:aa:c7:e9.
gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0x9000, speed 1455kHz
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 6
ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 6 (level, low) -> IRQ
6 ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 6, io mem 0xe4800000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-2: configuration #1 chosen from 1 choice
############## error here:
usb 1-2: can't set config #1, error -62
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
usb 1-2: USB disconnect, address 2
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) ->
IRQ 10 Installing spdif_bug patch: Audigy 2 [SB0240]
agpgart: Detected SiS 648 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:00:0a.2[B] -> Link [LNKD] -> GSI 4 (level, low) -> IRQ
4 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[4] MMIO=[e3800000-e38007ff]
Max Packet=[2048] IR/IT contexts=[4/8] usb 4-3: new high speed USB device
using ehci_hcd and address 3 usb 4-3: configuration #1 chosen from 1 choice
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
usb 2-1: new full speed USB device using ohci_hcd and address 2
Linux video capture interface: v2.00
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: pci latency fixup [32]
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10 bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq: 10, latency: 32, mmio:
0xee800000 bttv0: subsystem: 11ff:0012 (UNKNOWN)
please mail id, board name and the correct card= insmod option to
video4linux-list@redhat.com bttv0: using: Pinnacle PCTV Studio/Rave
[card=39,insmod option] bttv0: setting pci timer to 32
bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init]
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: bt878 #0 [sw] passed test.
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tuner 1-0043: chip found @ 0x86 (bt878 #0 [sw])
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0060: Chip ID is not zero. It is not a TEA5767
tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 1-0060: microtune: companycode=4d54 part=04 rev=04
usb 2-1: configuration #1 chosen from 1 choice
tuner 1-0060: microtune MT2032 found, OK
tuner 1-0060: microtune: companycode=4d54 part=04 rev=04
tuner 1-0060: microtune MT2032 found, OK
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c010102585a]
usb 1-2: new low speed USB device using ohci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
pwc: Philips webcam module version 10.0.12 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 &
PCVC830/840. pwc: Also supports the Askey VC010, various Logitech Quickcams,
Samsung MPC-C10 and MPC-C30, pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina
Eye and Visionite VCS-UC300 and VCS-UM100. pwc: Logitech QuickCam 4000 Pro USB
webcam detected. pwc: Registered as /dev/video1.
usbcore: registered new interface driver Philips webcam
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:03.0-2 usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usbcore: registered new interface driver snd-usb-audio
Realtime LSM initialized (group 18, mlock=1)
NET: Registered protocol family 10
lp0: using parport0 (interrupt-driven).
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1196800k swap on /dev/hda5. Priority:-1 extents:1 across:1196800k
rtc: I/O resource 70 is not free.
Generic RTC Driver v1.07
scsi 0:0:0:0: Direct-Access SAMSUNG SP2014N VC10 PQ: 0 ANSI: 0 CCS
usb-storage: device scan complete
scsi 0:0:0:0: Attached scsi generic sg0 type 0
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
sda: Write Protect is off
sda: Mode Sense: 00 14 00 00
sda: assuming drive cache: write through
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
sda: Write Protect is off
sda: Mode Sense: 00 14 00 00
sda: assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
Do you have any clue on how to solve this? I also try the 2.6.20-r8 before the
2.6.21, but the pc was hanging the same.
Last, /proc/interrupts:
CPU0
0: 270 XT-PIC-XT timer
1: 176 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
3: 5982 XT-PIC-XT ohci_hcd:usb1
4: 1669 XT-PIC-XT ohci1394, eth0
5: 98 XT-PIC-XT ohci_hcd:usb2
6: 783 XT-PIC-XT ohci_hcd:usb3, ehci_hcd:usb4
7: 1 XT-PIC-XT parport0
8: 2 XT-PIC-XT rtc
9: 0 XT-PIC-XT acpi
10: 4 XT-PIC-XT bttv0
11: 427702 XT-PIC-XT EMU10K1
12: 4 XT-PIC-XT i8042
14: 21349 XT-PIC-XT ide0
15: 6951 XT-PIC-XT ide1
NMI: 0
LOC: 477708
ERR: 0
MIS: 0
Cheers,
Dominique
reply other threads:[~2007-03-25 15:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070325090552.4f759b68@localhost \
--to=dominique.michel@citycable.ch \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.