From: Adrian Bunk <bunk@stusta.de>
To: James.Bottomley@SteelEye.com
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [2.6 patch] drivers/scsi/nsp32.c: remove kernel 2.4 code
Date: Mon, 26 Mar 2007 06:08:38 +0200 [thread overview]
Message-ID: <20070326040838.GY16477@stusta.de> (raw)
This patch removes kernel 2.4 code.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
drivers/scsi/nsp32.c | 109 +++++--------------------------------------
1 file changed, 13 insertions(+), 96 deletions(-)
--- linux-2.6.21-rc4-mm1/drivers/scsi/nsp32.c.old 2007-03-25 20:27:34.000000000 +0200
+++ linux-2.6.21-rc4-mm1/drivers/scsi/nsp32.c 2007-03-25 20:31:59.000000000 +0200
@@ -49,10 +49,6 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_ioctl.h>
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
-# include <linux/blk.h>
-#endif
-
#include "nsp32.h"
@@ -199,17 +195,9 @@
static void __exit exit_nsp32 (void);
/* struct struct scsi_host_template */
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
static int nsp32_proc_info (struct Scsi_Host *, char *, char **, off_t, int, int);
-#else
-static int nsp32_proc_info (char *, char **, off_t, int, int, int);
-#endif
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
static int nsp32_detect (struct pci_dev *pdev);
-#else
-static int nsp32_detect (struct scsi_host_template *);
-#endif
static int nsp32_queuecommand(struct scsi_cmnd *,
void (*done)(struct scsi_cmnd *));
static const char *nsp32_info (struct Scsi_Host *);
@@ -296,15 +284,7 @@
.eh_abort_handler = nsp32_eh_abort,
.eh_bus_reset_handler = nsp32_eh_bus_reset,
.eh_host_reset_handler = nsp32_eh_host_reset,
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,74))
- .detect = nsp32_detect,
- .release = nsp32_release,
-#endif
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,2))
- .use_new_eh_code = 1,
-#else
/* .highmem_io = 1, */
-#endif
};
#include "nsp32_io.h"
@@ -1210,13 +1190,9 @@
unsigned long flags;
int ret;
int handled = 0;
-
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
struct Scsi_Host *host = data->Host;
+
spin_lock_irqsave(host->host_lock, flags);
-#else
- spin_lock_irqsave(&io_request_lock, flags);
-#endif
/*
* IRQ check, then enable IRQ mask
@@ -1480,11 +1456,7 @@
nsp32_write2(base, IRQ_CONTROL, 0);
out2:
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
spin_unlock_irqrestore(host->host_lock, flags);
-#else
- spin_unlock_irqrestore(&io_request_lock, flags);
-#endif
nsp32_dbg(NSP32_DEBUG_INTR, "exit");
@@ -1499,28 +1471,15 @@
nsp32_dbg(NSP32_DEBUG_PROC, "buffer=0x%p pos=0x%p length=%d %d\n", buffer, pos, length, length - (pos - buffer));\
} \
} while(0)
-static int nsp32_proc_info(
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
- struct Scsi_Host *host,
-#endif
- char *buffer,
- char **start,
- off_t offset,
- int length,
-#if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
- int hostno,
-#endif
- int inout)
+
+static int nsp32_proc_info(struct Scsi_Host *host, char *buffer, char **start,
+ off_t offset, int length, int inout)
{
char *pos = buffer;
int thislength;
unsigned long flags;
nsp32_hw_data *data;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
int hostno;
-#else
- struct Scsi_Host *host;
-#endif
unsigned int base;
unsigned char mode_reg;
int id, speed;
@@ -1531,15 +1490,7 @@
return -EINVAL;
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
hostno = host->host_no;
-#else
- /* search this HBA host */
- host = scsi_host_hn_get(hostno);
- if (host == NULL) {
- return -ESRCH;
- }
-#endif
data = (nsp32_hw_data *)host->hostdata;
base = host->io_port;
@@ -2674,17 +2625,7 @@
* 0x900-0xbff: (map same 0x800-0x8ff I/O port image repeatedly)
* 0xc00-0xfff: CardBus status registers
*/
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
-#define DETECT_OK 0
-#define DETECT_NG 1
-#define PCIDEV pdev
static int nsp32_detect(struct pci_dev *pdev)
-#else
-#define DETECT_OK 1
-#define DETECT_NG 0
-#define PCIDEV (data->Pci)
-static int nsp32_detect(struct scsi_host_template *sht)
-#endif
{
struct Scsi_Host *host; /* registered host structure */
struct resource *res;
@@ -2697,11 +2638,7 @@
/*
* register this HBA as SCSI device
*/
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
host = scsi_host_alloc(&nsp32_template, sizeof(nsp32_hw_data));
-#else
- host = scsi_register(sht, sizeof(nsp32_hw_data));
-#endif
if (host == NULL) {
nsp32_msg (KERN_ERR, "failed to scsi register");
goto err;
@@ -2719,9 +2656,6 @@
host->unique_id = data->BaseAddress;
host->n_io_port = data->NumAddress;
host->base = (unsigned long)data->MmioAddress;
-#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,63))
- scsi_set_pci_device(host, PCIDEV);
-#endif
data->Host = host;
spin_lock_init(&(data->Lock));
@@ -2776,7 +2710,7 @@
/*
* setup DMA
*/
- if (pci_set_dma_mask(PCIDEV, DMA_32BIT_MASK) != 0) {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) {
nsp32_msg (KERN_ERR, "failed to set PCI DMA mask");
goto scsi_unregister;
}
@@ -2784,7 +2718,7 @@
/*
* allocate autoparam DMA resource.
*/
- data->autoparam = pci_alloc_consistent(PCIDEV, sizeof(nsp32_autoparam), &(data->auto_paddr));
+ data->autoparam = pci_alloc_consistent(pdev, sizeof(nsp32_autoparam), &(data->auto_paddr));
if (data->autoparam == NULL) {
nsp32_msg(KERN_ERR, "failed to allocate DMA memory");
goto scsi_unregister;
@@ -2793,7 +2727,7 @@
/*
* allocate scatter-gather DMA resource.
*/
- data->sg_list = pci_alloc_consistent(PCIDEV, NSP32_SG_TABLE_SIZE,
+ data->sg_list = pci_alloc_consistent(pdev, NSP32_SG_TABLE_SIZE,
&(data->sg_paddr));
if (data->sg_list == NULL) {
nsp32_msg(KERN_ERR, "failed to allocate DMA memory");
@@ -2883,16 +2817,14 @@
goto free_irq;
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
- ret = scsi_add_host(host, &PCIDEV->dev);
+ ret = scsi_add_host(host, &pdev->dev);
if (ret) {
nsp32_msg(KERN_ERR, "failed to add scsi host");
goto free_region;
}
scsi_scan_host(host);
-#endif
- pci_set_drvdata(PCIDEV, host);
- return DETECT_OK;
+ pci_set_drvdata(pdev, host);
+ return 0;
free_region:
release_region(host->io_port, host->n_io_port);
@@ -2901,22 +2833,19 @@
free_irq(host->irq, data);
free_sg_list:
- pci_free_consistent(PCIDEV, NSP32_SG_TABLE_SIZE,
+ pci_free_consistent(pdev, NSP32_SG_TABLE_SIZE,
data->sg_list, data->sg_paddr);
free_autoparam:
- pci_free_consistent(PCIDEV, sizeof(nsp32_autoparam),
+ pci_free_consistent(pdev, sizeof(nsp32_autoparam),
data->autoparam, data->auto_paddr);
scsi_unregister:
scsi_host_put(host);
err:
- return DETECT_NG;
+ return 1;
}
-#undef DETECT_OK
-#undef DETECT_NG
-#undef PCIDEV
static int nsp32_release(struct Scsi_Host *host)
{
@@ -3525,11 +3454,7 @@
pci_set_master(pdev);
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
ret = nsp32_detect(pdev);
-#else
- ret = scsi_register_host(&nsp32_template);
-#endif
nsp32_msg(KERN_INFO, "irq: %i mmio: %p+0x%lx slot: %s model: %s",
pdev->irq,
@@ -3544,25 +3469,17 @@
static void __devexit nsp32_remove(struct pci_dev *pdev)
{
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
struct Scsi_Host *host = pci_get_drvdata(pdev);
-#endif
nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
scsi_remove_host(host);
nsp32_release(host);
scsi_host_put(host);
-#else
- scsi_unregister_host(&nsp32_template);
-#endif
}
-
-
static struct pci_driver nsp32_driver = {
.name = "nsp32",
.id_table = nsp32_pci_table,
next reply other threads:[~2007-03-26 4:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-26 4:08 Adrian Bunk [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-04-26 23:47 [2.6 patch] drivers/scsi/nsp32.c: remove kernel 2.4 code Adrian Bunk
2007-04-26 23:59 ` Robert P. J. Day
2007-04-27 0:13 ` Adrian Bunk
2007-04-27 0:30 ` James Bottomley
2007-04-27 4:26 ` GOTO Masanori
2007-04-27 14:55 ` Robert P. J. Day
2007-04-27 15:01 ` Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070326040838.GY16477@stusta.de \
--to=bunk@stusta.de \
--cc=James.Bottomley@SteelEye.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.