From: andy@warmcat.com
To: linux-wireless@vger.kernel.org
Cc: Andy Green <andy@warmcat.com>
Subject: [PATCH 7/7] mac80211: Monitor mode radiotap-based packet injection
Date: Sat, 07 Apr 2007 11:51:05 +0100 [thread overview]
Message-ID: <20070407105139.767353805@warmcat.com> (raw)
In-Reply-To: 20070407105058.762762192@warmcat.com
From: Andy Green <andy@warmcat.com>
Try #6
- Accounted for various comments from Johannes Berg
- Radiotap parsing is moved to cfg80211 as requested in a separate patch
Try #5
- De-indent last few indented comments
Try #4
- All from Michael Wu's feedback: further style heresies removed
- took account of radiotap arg alignment requirement. n-byte arg must be
placed on n-byte boundary using padding where necessary
Try #3
- moved to Michael Wu's method of tracking if we came in on a
monitor interface by using ifindex
- removed older proposed monitor interface tracking method and flags
- style fixes
- removed duped #include that is present in Michael Wu's patch already
Try #2
- took Michael Wu's advice about better tools and basing on wireless-dev
- took Luis Rodriguez's advice about coding style makeover
- took Pavel Roskin's advice about little-endian radiotap
Signed-off-by: Andy Green <andy@warmcat.com>
diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
index e6a0a0e..95b041e 100644
--- a/net/mac80211/ieee80211.c
+++ b/net/mac80211/ieee80211.c
@@ -1070,7 +1070,111 @@ ieee80211_tx_h_ps_buf(struct ieee80211_txrx_data *tx)
}
-static void inline
+/* deal with packet injection down monitor interface
+ * with Radiotap Header -- only called for monitor mode interface
+ */
+
+static ieee80211_txrx_result
+__ieee80211_convert_radiotap_to_control_and_remove(
+ struct ieee80211_txrx_data *tx,
+ struct sk_buff *skb, struct ieee80211_tx_control *control)
+{
+ /* this is the moment to interpret and discard the radiotap header that
+ * must be at the start of the packet injected in Monitor mode
+ *
+ * Need to take some care with endian-ness since radiotap
+ * args are little-endian
+ */
+
+ struct ieee80211_radiotap_iterator iterator;
+ struct ieee80211_radiotap_header *rthdr =
+ (struct ieee80211_radiotap_header *) skb->data;
+ struct ieee80211_hw_mode *hw_mode=tx->local->hw.conf.mode;
+
+ /* this can fail some sanity checks, drop packet if it does so */
+
+ if (ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len) < 0)
+ return TXRX_DROP;
+
+ /* default control situation for all injected packets
+ * FIXME: this does not suit all usage cases, expand to allow control
+ */
+
+ control->retry_limit = 1; /* no retry */
+ control->key_idx = -1; /* no encryption key */
+ control->flags &= ~(IEEE80211_TXCTL_USE_RTS_CTS |
+ IEEE80211_TXCTL_USE_CTS_PROTECT);
+ control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT |
+ IEEE80211_TXCTL_NO_ACK;
+ control->antenna_sel_tx = 0; /* default to default antenna */
+
+ /* for every radiotap entry that is present (returns -ve on end or
+ * on error)
+ */
+
+ while (ieee80211_radiotap_iterator_next(&iterator) >= 0) {
+ int i, target_rate;
+
+ /* see if this argument is something we can use */
+
+ switch (iterator.this_arg_index) {
+
+ case IEEE80211_RADIOTAP_RATE:
+ /* radiotap "rate" u8 is in
+ * 500kbps units, eg, 0x02=1Mbps
+ * ieee80211 "rate" int is
+ * in 100kbps units, eg, 0x0a=1Mbps
+ */
+ target_rate = (*iterator.this_arg) * 5;
+ for (i = 0; i < hw_mode->num_rates; i++) {
+ struct ieee80211_rate *r = &hw_mode->rates[i];
+
+ if (r->rate > target_rate)
+ continue;
+
+ control->rate = r;
+
+ if (r->flags & IEEE80211_RATE_PREAMBLE2)
+ control->tx_rate = r->val2;
+ else
+ control->tx_rate = r->val;
+
+ /* end on exact match */
+ if (r->rate == target_rate)
+ i = hw_mode->num_rates;
+
+ }
+ break;
+
+ case IEEE80211_RADIOTAP_ANTENNA:
+ /* radiotap uses 0 for 1st ant,
+ * mac80211 is 1 for 1st ant
+ * absence of IEEE80211_RADIOTAP_ANTENNA
+ * gives default/diversity
+ */
+ control->antenna_sel_tx = (*iterator.this_arg) + 1;
+ break;
+
+ case IEEE80211_RADIOTAP_DBM_TX_POWER:
+ control->power_level = *iterator.this_arg;
+ break;
+
+ default:
+ break;
+ }
+
+ }
+
+ /* remove the radiotap header
+ * rthdr->it_len was sanity-checked against skb->len by iterator init
+ */
+ skb_pull(skb, le16_to_cpu(rthdr->it_len));
+
+ return TXRX_CONTINUE;
+}
+
+
+static ieee80211_txrx_result inline
__ieee80211_tx_prepare(struct ieee80211_txrx_data *tx,
struct sk_buff *skb,
struct net_device *dev,
@@ -1078,6 +1182,9 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx,
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_sub_if_data *sdata;
+ ieee80211_txrx_result res = TXRX_CONTINUE;
+
int hdrlen;
memset(tx, 0, sizeof(*tx));
@@ -1087,7 +1194,32 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx,
tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev);
tx->sta = sta_info_get(local, hdr->addr1);
tx->fc = le16_to_cpu(hdr->frame_control);
+
+ /* set defaults for things that can be set by
+ * injected radiotap headers
+ */
+
control->power_level = local->hw.conf.power_level;
+ control->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
+ if (local->sta_antenna_sel != STA_ANTENNA_SEL_AUTO && tx->sta)
+ control->antenna_sel_tx = tx->sta->antenna_sel_tx;
+
+ /* process and remove the injection radiotap header */
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ if (unlikely(sdata->type == IEEE80211_IF_TYPE_MNTR)) {
+ if (__ieee80211_convert_radiotap_to_control_and_remove(
+ tx, skb, control) == TXRX_DROP) {
+ return TXRX_DROP;
+ }
+ /* we removed the radiotap header after this point,
+ * we filled control with what we could use
+ * set to the actual ieee header now
+ */
+ hdr = (struct ieee80211_hdr *) skb->data;
+ res = TXRX_QUEUED; /* indication it was monitor packet */
+ }
+
tx->u.tx.control = control;
tx->u.tx.unicast = !is_multicast_ether_addr(hdr->addr1);
if (is_multicast_ether_addr(hdr->addr1))
@@ -1104,9 +1236,6 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx,
control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK;
tx->sta->clear_dst_mask = 0;
}
- control->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
- if (local->sta_antenna_sel != STA_ANTENNA_SEL_AUTO && tx->sta)
- control->antenna_sel_tx = tx->sta->antenna_sel_tx;
hdrlen = ieee80211_get_hdrlen(tx->fc);
if (skb->len > hdrlen + sizeof(rfc1042_header) + 2) {
u8 *pos = &skb->data[hdrlen + sizeof(rfc1042_header)];
@@ -1114,6 +1243,7 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx,
}
control->flags |= IEEE80211_TXCTL_FIRST_FRAGMENT;
+ return res;
}
static int inline is_ieee80211_device(struct net_device *dev,
@@ -1221,7 +1351,7 @@ static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb,
struct sta_info *sta;
ieee80211_tx_handler *handler;
struct ieee80211_txrx_data tx;
- ieee80211_txrx_result res = TXRX_DROP;
+ ieee80211_txrx_result res = TXRX_DROP, res_prepare;
int ret, i;
WARN_ON(__ieee80211_queue_pending(local, control->queue));
@@ -1231,15 +1361,26 @@ static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb,
return 0;
}
- __ieee80211_tx_prepare(&tx, skb, dev, control);
+ res_prepare = __ieee80211_tx_prepare(&tx, skb, dev, control);
+
+ if (res_prepare == TXRX_DROP) {
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
sta = tx.sta;
tx.u.tx.mgmt_interface = mgmt;
tx.u.tx.mode = local->hw.conf.mode;
- for (handler = local->tx_handlers; *handler != NULL; handler++) {
- res = (*handler)(&tx);
- if (res != TXRX_CONTINUE)
- break;
+ if (res_prepare == TXRX_QUEUED) { /* if it was an injected packet */
+ res = TXRX_CONTINUE;
+ } else {
+ for (handler = local->tx_handlers; *handler != NULL;
+ handler++) {
+ res = (*handler)(&tx);
+ if (res != TXRX_CONTINUE)
+ break;
+ }
}
skb = tx.skb; /* handlers are allowed to change skb */
@@ -1473,6 +1614,51 @@ static int ieee80211_subif_start_xmit(struct sk_buff *skb,
goto fail;
}
+ if (unlikely(sdata->type == IEEE80211_IF_TYPE_MNTR)) {
+ struct ieee80211_radiotap_header * prthdr =
+ (struct ieee80211_radiotap_header *)skb->data;
+
+ /* there must be a radiotap header at the
+ * start in this case
+ */
+
+ if (unlikely(prthdr->it_version)) {
+ /* only version 0 is supported */
+ ret = 0;
+ goto fail;
+ }
+
+ skb->dev = local->mdev;
+
+ pkt_data = (struct ieee80211_tx_packet_data *)skb->cb;
+ memset(pkt_data, 0, sizeof(struct ieee80211_tx_packet_data));
+ pkt_data->ifindex = sdata->dev->ifindex;
+ pkt_data->mgmt_iface = 0;
+ pkt_data->do_not_encrypt = 1;
+
+ /* above needed because we set skb device to master */
+
+ /* fix up the pointers accounting for the radiotap
+ * header still being in there. We are being given
+ * a precooked IEEE80211 header so no need for
+ * normal processing
+ */
+
+ skb->mac.raw = skb->data+prthdr->it_len;
+ skb->nh.raw = skb->data+prthdr->it_len+
+ sizeof(struct ieee80211_hdr);
+ skb->h.raw = skb->data+prthdr->it_len+
+ sizeof(struct ieee80211_hdr);
+
+ /* pass the radiotap header up to
+ * the next stage intact
+ */
+
+ dev_queue_xmit(skb);
+
+ return 0;
+ }
+
nh_pos = skb->nh.raw - skb->data;
h_pos = skb->h.raw - skb->data;
--
prev parent reply other threads:[~2007-04-07 10:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-07 10:50 [PATCH 0/7] Try #7: Radiotap on Monitor Mode interfaces for rx and tx andy
2007-04-07 10:50 ` [PATCH 1/7] sync wireless-dev with radiotap header in wireless-2.6 andy
2007-04-07 10:51 ` [PATCH 2/7] mac80211: Add radiotap support andy
2007-04-07 10:51 ` [PATCH 3/7] mac80211: Radiotap rx to use fallback rate calc if ieee80211_get_rate fails andy
2007-04-07 19:25 ` Michael Wu
2007-04-07 10:51 ` [PATCH 4/7] mac80211: Monitor mode radiotap injection docs andy
2007-04-07 10:51 ` [PATCH 5/7] mac80211: Define present bitmap extend bit mask andy
2007-04-07 10:51 ` [PATCH 6/7] cfg80211: Radiotap parser andy
2007-04-07 10:51 ` andy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070407105139.767353805@warmcat.com \
--to=andy@warmcat.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.