[PATCH 0/4] skge/sky2 patches for 2.6.21

[PATCH 0/4] skge/sky2 patches for 2.6.21

[Stephen Hemminger]

These are little bug fixes found on skge/sky2 driver.
I based these on netdev-2.6#upstream-fixes

--

[PATCH 1/4] skge: turn carrier off when down

[Stephen Hemminger]

[-- Attachment #1: skge-carrier.patch --]
[-- Type: text/plain, Size: 627 bytes --]

Driver needs to turn off carrier when down, otherwise it can
confuse bonding and bridging and looks like carrier is on immediately
when it is brought back up.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

--- netdev-2.6.orig/drivers/net/skge.c	2007-04-07 15:09:13.000000000 -0700
+++ netdev-2.6/drivers/net/skge.c	2007-04-07 15:09:58.000000000 -0700
@@ -2535,6 +2535,7 @@
 		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
 
 	netif_stop_queue(dev);
+	netif_carrier_off(dev);
 	if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC)
 		del_timer_sync(&skge->link_timer);
 

--

Re: [PATCH 1/4] skge: turn carrier off when down

[Jeff Garzik]

Stephen Hemminger wrote:
> Driver needs to turn off carrier when down, otherwise it can
> confuse bonding and bridging and looks like carrier is on immediately
> when it is brought back up.
> 
> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
> 
> --- netdev-2.6.orig/drivers/net/skge.c	2007-04-07 15:09:13.000000000 -0700
> +++ netdev-2.6/drivers/net/skge.c	2007-04-07 15:09:58.000000000 -0700
> @@ -2535,6 +2535,7 @@
>  		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
>  
>  	netif_stop_queue(dev);
> +	netif_carrier_off(dev);
>  	if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC)
>  		del_timer_sync(&skge->link_timer);
>  
> 


applied 1-4

[PATCH 2/4] sky2: turn carrier off when down

[Stephen Hemminger]

[-- Attachment #1: sky2-carrier.patch --]
[-- Type: text/plain, Size: 445 bytes --]

Driver needs to turn off carrier when down.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

--- netdev-2.6.orig/drivers/net/sky2.c	2007-04-07 15:11:02.000000000 -0700
+++ netdev-2.6/drivers/net/sky2.c	2007-04-07 15:11:21.000000000 -0700
@@ -1561,6 +1561,7 @@
 
 	/* Stop more packets from being queued */
 	netif_stop_queue(dev);
+	netif_carrier_off(dev);
 
 	/* Disable port IRQ */
 	imask = sky2_read32(hw, B0_IMSK);

--

[PATCH 3/4] sky2: turn on clocks when doing resume

[Stephen Hemminger]

[-- Attachment #1: sky2-ec-clocks-resume.patch --]
[-- Type: text/plain, Size: 636 bytes --]

Some of these chips are disabled until clock is enabled.
This fixes:
     http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=404107

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>


--- netdev-2.6.orig/drivers/net/sky2.c	2007-04-07 15:11:48.000000000 -0700
+++ netdev-2.6/drivers/net/sky2.c	2007-04-07 15:12:31.000000000 -0700
@@ -3770,6 +3770,11 @@
 		goto out;
 
 	pci_enable_wake(pdev, PCI_D0, 0);
+
+	/* Re-enable all clocks */
+	if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U)
+		sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+
 	sky2_reset(hw);
 
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);

--

[PATCH 4/4] sky2: phy workarounds for Yukon EC-U A1

[Stephen Hemminger]

[-- Attachment #1: sky2-ec-u-a1.patch --]
[-- Type: text/plain, Size: 1079 bytes --]

The workaround Yukon EC-U wasn't comparing with correct
version and wasn't doing correct setup. Without it, 88e8056
throws all sorts of errors.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

--- netdev-2.6.orig/drivers/net/sky2.c	2007-04-07 15:12:55.000000000 -0700
+++ netdev-2.6/drivers/net/sky2.c	2007-04-07 15:13:31.000000000 -0700
@@ -510,9 +510,9 @@
 		ledover &= ~PHY_M_LED_MO_RX;
 	}
 
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
+	    hw->chip_rev == CHIP_REV_YU_EC_U_A1) {
 		/* apply fixes in PHY AFE */
-		pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
 
 		/* increase differential signal amplitude in 10BASE-T */
@@ -524,7 +524,7 @@
 		gm_phy_write(hw, port, 0x17, 0x2002);
 
 		/* set page register to 0 */
-		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
 	} else if (hw->chip_id != CHIP_ID_YUKON_EX) {
 		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
 

--

[PATCH 0/4] skge and sky2 patches

[Stephen Hemminger]

These match the recent patches submitted for 2.6.21

--

[PATCH 1/4] skge: turn carrier off when down

[Stephen Hemminger]

[-- Attachment #1: skge-carrier.patch --]
[-- Type: text/plain, Size: 650 bytes --]

Driver needs to turn off carrier when down, otherwise it can
confuse bonding and bridging and looks like carrier is on immediately
when it is brought back up.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

--- linux-2.6.20.y.orig/drivers/net/skge.c	2007-04-07 15:36:05.000000000 -0700
+++ linux-2.6.20.y/drivers/net/skge.c	2007-04-07 15:54:36.000000000 -0700
@@ -2462,6 +2462,7 @@
 		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
 
 	netif_stop_queue(dev);
+	netif_carrier_off(dev);
 	if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC)
 		cancel_rearming_delayed_work(&skge->link_thread);
 

--