From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Thu, 19 Apr 2007 09:44:45 +0000 Subject: Re: [lm-sensors] lmsensors in 2.6.16 on a Tyan 2882-D motherboard, Message-Id: <20070419114445.0daa82ad@hyperion.delvare> List-Id: References: <44325498.8060805@corky.net> In-Reply-To: <44325498.8060805@corky.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Wed, 18 Apr 2007 13:46:26 +0100, Just Marc wrote: > I'm still getting these weird reading with the latest versions: > lmsensors 2.10.3 kernel: 2.6.20.7 > > Hopefully someone can shed some light. Current output below. > > Thanks! > > > box:~/lm_sensors-2.10.3# /usr/local/bin/sensors -v > sensors version 2.10.3 with libsensors version 2.10.3 > box:~/lm_sensors-2.10.3# /usr/local/bin/sensors > w83627hf-isa-0290 > Adapter: ISA adapter > CPU2 Volt: +1.42 V (min = +1.33 V, max = +1.47 V) > CPU1 Volt: +1.44 V (min = +1.33 V, max = +1.47 V) > 3.3V: +3.30 V (min = +3.14 V, max = +3.47 V) > DDR VTT: +1.30 V (min = +2.85 V, max = +3.47 V) ALARM > DDR 2.5V: +2.56 V (min = +0.34 V, max = +0.80 V) ALARM > CPU2 Fan: 3924 RPM (min = 7670 RPM, div = 8) ALARM > CPU1 Fan: 3443 RPM (min = 1430 RPM, div = 8) > Fan5: 0 RPM (min = 730 RPM, div = 8) ALARM > vid: +1.400 V (VRM Version 2.4) > alarms: > beep_enable: > Sound alarm enabled I don't see anything weird here. Just the limits of the two DDR voltages and fans 1 and 3 need to be set to sensible values, and you're done. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors