From: Dan Williams <dan.j.williams@intel.com>
To: gregkh@suse.de
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] iop13xx: msi support (rev6)
Date: Thu, 26 Apr 2007 18:21:43 -0700 [thread overview]
Message-ID: <20070427012143.30322.46778.stgit@dwillia2-linux.ch.intel.com> (raw)
In-Reply-To: <20070427012138.30322.850.stgit@dwillia2-linux.ch.intel.com>
From: Daniel Wolstenholme <daniel.e.wolstenholme@intel.com>
Enable devices to signal interrupts via PCI memory cycles.
rev6:
* fix enable/disable typo, Michael Ellerman
rev5:
* fix up ack, enable, and disable for iop13xx_msi_chip
rev4:
* move smp compile fix to separate patch
* use dynamic_irq_init in create_irq()
* hookup mask/unmask routines in iop13xx_msi_chip
rev3:
* change msi.c to use linux/smp.h instead of asm/smp.h
* call dynamic_irq_cleanup at destroy_irq time
rev2:
* destroy_irq did not take the full 128 bits of msi_irq_in_use into account
* added missing '&' for calls to test_and_set_bit and clear_bit
[ebiederm@xmission.com: review comments/suggestions]
[dan.j.williams@intel.com: cleanups/forward port to 2.6-git]
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Daniel Wolstenholme <daniel.e.wolstenholme@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
---
arch/arm/mach-iop13xx/Makefile | 1
arch/arm/mach-iop13xx/irq.c | 5 +
arch/arm/mach-iop13xx/msi.c | 194 ++++++++++++++++++++++++++++++++
arch/arm/mach-iop13xx/pci.c | 16 +++
include/asm-arm/arch-iop13xx/iop13xx.h | 29 +++++
include/asm-arm/arch-iop13xx/irqs.h | 8 +
include/asm-arm/arch-iop13xx/msi.h | 11 ++
7 files changed, 262 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile
index 4185e05..02bd511 100644
--- a/arch/arm/mach-iop13xx/Makefile
+++ b/arch/arm/mach-iop13xx/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_ARCH_IOP13XX) += pci.o
obj-$(CONFIG_ARCH_IOP13XX) += io.o
obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o
+obj-$(CONFIG_PCI_MSI) += msi.o
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index b2eb0b9..5791add 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -26,6 +26,7 @@
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/irqs.h>
+#include <asm/arch/msi.h>
/* INTCTL0 CP6 R0 Page 4
*/
@@ -258,7 +259,7 @@ void __init iop13xx_init_irq(void)
write_intbase(INTBASE);
write_intsize(INTSIZE_4);
- for(i = 0; i < NR_IOP13XX_IRQS; i++) {
+ for(i = 0; i <= IRQ_IOP13XX_HPI; i++) {
if (i < 32)
set_irq_chip(i, &iop13xx_irqchip1);
else if (i < 64)
@@ -271,4 +272,6 @@ void __init iop13xx_init_irq(void)
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
+
+ iop13xx_msi_init();
}
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
new file mode 100644
index 0000000..1b64eaa
--- /dev/null
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -0,0 +1,194 @@
+/*
+ * arch/arm/mach-iop13xx/msi.c
+ *
+ * PCI MSI support for the iop13xx processor
+ *
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/pci.h>
+#include <linux/msi.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+
+#define IOP13XX_NUM_MSI_IRQS 128
+static DECLARE_BITMAP(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
+
+/* IMIPR0 CP6 R8 Page 1
+ */
+static inline u32 read_imipr_0(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c8, c1, 0":"=r" (val));
+ return val;
+}
+static inline void write_imipr_0(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c8, c1, 0"::"r" (val));
+}
+
+/* IMIPR1 CP6 R9 Page 1
+ */
+static inline u32 read_imipr_1(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c9, c1, 0":"=r" (val));
+ return val;
+}
+static inline void write_imipr_1(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c9, c1, 0"::"r" (val));
+}
+
+/* IMIPR2 CP6 R10 Page 1
+ */
+static inline u32 read_imipr_2(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c10, c1, 0":"=r" (val));
+ return val;
+}
+static inline void write_imipr_2(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c10, c1, 0"::"r" (val));
+}
+
+/* IMIPR3 CP6 R11 Page 1
+ */
+static inline u32 read_imipr_3(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c11, c1, 0":"=r" (val));
+ return val;
+}
+static inline void write_imipr_3(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c11, c1, 0"::"r" (val));
+}
+
+static u32 (*read_imipr[])(void) = {
+ read_imipr_0,
+ read_imipr_1,
+ read_imipr_2,
+ read_imipr_3,
+};
+
+static void (*write_imipr[])(u32) = {
+ write_imipr_0,
+ write_imipr_1,
+ write_imipr_2,
+ write_imipr_3,
+};
+
+static void iop13xx_msi_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int i, j;
+ unsigned long status;
+
+ /* read IMIPR registers and find any active interrupts,
+ * then call ISR for each active interrupt
+ */
+ for (i = 0; i < ARRAY_SIZE(read_imipr); i++) {
+ status = (read_imipr[i])();
+ if (!status)
+ continue;
+
+ do {
+ j = find_first_bit(&status, 32);
+ (write_imipr[i])(1 << j); /* write back to clear bit */
+ desc = irq_desc + IRQ_IOP13XX_MSI_0 + j + (32*i);
+ desc_handle_irq(IRQ_IOP13XX_MSI_0 + j + (32*i), desc);
+ status = (read_imipr[i])();
+ } while (status);
+ }
+}
+
+void __init iop13xx_msi_init(void)
+{
+ set_irq_chained_handler(IRQ_IOP13XX_INBD_MSI, iop13xx_msi_handler);
+}
+
+/*
+ * Dynamic irq allocate and deallocation
+ */
+int create_irq(void)
+{
+ int irq, pos;
+
+again:
+ pos = find_first_zero_bit(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
+ irq = IRQ_IOP13XX_MSI_0 + pos;
+ if (irq > NR_IRQS)
+ return -ENOSPC;
+ /* test_and_set_bit operates on 32-bits at a time */
+ if (test_and_set_bit(pos, msi_irq_in_use))
+ goto again;
+
+ dynamic_irq_init(irq);
+
+ return irq;
+}
+
+void destroy_irq(unsigned int irq)
+{
+ int pos = irq - IRQ_IOP13XX_MSI_0;
+
+ dynamic_irq_cleanup(irq);
+
+ clear_bit(pos, msi_irq_in_use);
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+ destroy_irq(irq);
+}
+
+static void iop13xx_msi_nop(unsigned int irq)
+{
+ return;
+}
+
+static struct irq_chip iop13xx_msi_chip = {
+ .name = "PCI-MSI",
+ .ack = iop13xx_msi_nop,
+ .enable = unmask_msi_irq,
+ .disable = mask_msi_irq,
+ .mask = mask_msi_irq,
+ .unmask = unmask_msi_irq,
+};
+
+int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+{
+ int id, irq = create_irq();
+ struct msi_msg msg;
+
+ if (irq < 0)
+ return irq;
+
+ set_irq_msi(irq, desc);
+
+ msg.address_hi = 0x0;
+ msg.address_lo = IOP13XX_MU_MIMR_PCI;
+
+ id = iop13xx_cpu_id();
+ msg.data = (id << IOP13XX_MU_MIMR_CORE_SELECT) | (irq & 0x7f);
+
+ write_msi_msg(irq, &msg);
+ set_irq_chip_and_handler(irq, &iop13xx_msi_chip, handle_simple_irq);
+
+ return irq;
+}
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 89ec70e..bc3dcad 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -559,6 +559,14 @@ void __init iop13xx_atue_setup(void)
int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
u32 reg_val;
+#ifdef CONFIG_PCI_MSI
+ /* BAR 0 (inbound msi window) */
+ __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
+ __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUE_IALR0);
+ __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUE_IATVR0);
+ __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUE_IABAR0);
+#endif
+
/* BAR 1 (1:1 mapping with Physical RAM) */
/* Set limit and enable */
__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
@@ -720,6 +728,14 @@ void __init iop13xx_atux_setup(void)
else
atux_trhfa_timeout = jiffies;
+#ifdef CONFIG_PCI_MSI
+ /* BAR 0 (inbound msi window) */
+ __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
+ __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUX_IALR0);
+ __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUX_IATVR0);
+ __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUX_IABAR0);
+#endif
+
/* BAR 1 (1:1 mapping with Physical RAM) */
/* Set limit and enable */
__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h
index d26b755..9e15c34 100644
--- a/include/asm-arm/arch-iop13xx/iop13xx.h
+++ b/include/asm-arm/arch-iop13xx/iop13xx.h
@@ -176,6 +176,7 @@ static inline int iop13xx_cpu_id(void)
#define IOP13XX_ADMA1_PMMR_OFFSET 0x00000200
#define IOP13XX_ADMA2_PMMR_OFFSET 0x00000400
#define IOP13XX_PBI_PMMR_OFFSET 0x00001580
+#define IOP13XX_MU_PMMR_OFFSET 0x00004000
#define IOP13XX_ESSR0_PMMR_OFFSET 0x00002188
#define IOP13XX_ESSR0 IOP13XX_REG_ADDR32(0x00002188)
@@ -407,6 +408,34 @@ static inline int iop13xx_cpu_id(void)
#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK (0x7)
/*=======================================================================*/
+/*============================MESSAGING UNIT=============================*/
+#define IOP13XX_MU_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_MU_PMMR_OFFSET +\
+ (ofs))
+
+#define IOP13XX_MU_IMR0 IOP13XX_MU_OFFSET(0x10)
+#define IOP13XX_MU_IMR1 IOP13XX_MU_OFFSET(0x14)
+#define IOP13XX_MU_OMR0 IOP13XX_MU_OFFSET(0x18)
+#define IOP13XX_MU_OMR1 IOP13XX_MU_OFFSET(0x1C)
+#define IOP13XX_MU_IDR IOP13XX_MU_OFFSET(0x20)
+#define IOP13XX_MU_IISR IOP13XX_MU_OFFSET(0x24)
+#define IOP13XX_MU_IIMR IOP13XX_MU_OFFSET(0x28)
+#define IOP13XX_MU_ODR IOP13XX_MU_OFFSET(0x2C)
+#define IOP13XX_MU_OISR IOP13XX_MU_OFFSET(0x30)
+#define IOP13XX_MU_OIMR IOP13XX_MU_OFFSET(0x34)
+#define IOP13XX_MU_IRCSR IOP13XX_MU_OFFSET(0x38)
+#define IOP13XX_MU_ORCSR IOP13XX_MU_OFFSET(0x3C)
+#define IOP13XX_MU_MIMR IOP13XX_MU_OFFSET(0x48)
+#define IOP13XX_MU_MUCR IOP13XX_MU_OFFSET(0x50)
+#define IOP13XX_MU_QBAR IOP13XX_MU_OFFSET(0x54)
+#define IOP13XX_MU_MUBAR IOP13XX_MU_OFFSET(0x84)
+
+#define IOP13XX_MU_WINDOW_SIZE (8 * 1024)
+#define IOP13XX_MU_BASE_PHYS (0xff000000)
+#define IOP13XX_MU_BASE_PCI (0xff000000)
+#define IOP13XX_MU_MIMR_PCI (IOP13XX_MU_BASE_PCI + 0x48)
+#define IOP13XX_MU_MIMR_CORE_SELECT (15)
+/*=======================================================================*/
+
/*==============================ADMA UNITS===============================*/
#define IOP13XX_ADMA_PHYS_BASE(chan) IOP13XX_REG_ADDR32_PHYS((chan << 9))
#define IOP13XX_ADMA_UPPER_PA(chan) (IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
diff --git a/include/asm-arm/arch-iop13xx/irqs.h b/include/asm-arm/arch-iop13xx/irqs.h
index 5c6fac2..054e7ac 100644
--- a/include/asm-arm/arch-iop13xx/irqs.h
+++ b/include/asm-arm/arch-iop13xx/irqs.h
@@ -168,7 +168,7 @@ static inline u32 read_intpnd_3(void)
#define IRQ_IOP13XX_ATUE_IMD (110) /* 14 */
#define IRQ_IOP13XX_MU_MSI_TB (111) /* 15 */
#define IRQ_IOP13XX_RSVD_112 (112) /* 16 */
-#define IRQ_IOP13XX_RSVD_113 (113) /* 17 */
+#define IRQ_IOP13XX_INBD_MSI (113) /* 17 */
#define IRQ_IOP13XX_RSVD_114 (114) /* 18 */
#define IRQ_IOP13XX_RSVD_115 (115) /* 19 */
#define IRQ_IOP13XX_RSVD_116 (116) /* 20 */
@@ -184,7 +184,13 @@ static inline u32 read_intpnd_3(void)
#define IRQ_IOP13XX_RSVD_126 (126) /* 30 */
#define IRQ_IOP13XX_HPI (127) /* 31 */
+#ifdef CONFIG_PCI_MSI
+#define IRQ_IOP13XX_MSI_0 (IRQ_IOP13XX_HPI + 1)
+#define NR_IOP13XX_IRQS (IRQ_IOP13XX_MSI_0 + 128)
+#else
#define NR_IOP13XX_IRQS (IRQ_IOP13XX_HPI + 1)
+#endif
+
#define NR_IRQS NR_IOP13XX_IRQS
#endif /* _IOP13XX_IRQ_H_ */
diff --git a/include/asm-arm/arch-iop13xx/msi.h b/include/asm-arm/arch-iop13xx/msi.h
new file mode 100644
index 0000000..b80c5ae
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/msi.h
@@ -0,0 +1,11 @@
+#ifndef _IOP13XX_MSI_H_
+#define _IOP13XX_MSI_H_
+#ifdef CONFIG_PCI_MSI
+void iop13xx_msi_init(void);
+#else
+static inline void iop13xx_msi_init(void)
+{
+ return;
+}
+#endif
+#endif
prev parent reply other threads:[~2007-04-27 1:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-27 1:21 [PATCH 1/2] msi: fix ARM compile Dan Williams
2007-04-27 1:21 ` Dan Williams [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070427012143.30322.46778.stgit@dwillia2-linux.ch.intel.com \
--to=dan.j.williams@intel.com \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.