From: olof@lixom.net (Olof Johansson)
To: jgarzik@pobox.com
Cc: netdev@vger.kernel.org
Subject: [PATCH v3] [4/10] pasemi_mac: Timer and interrupt fixes
Date: Sat, 28 Apr 2007 15:37:16 -0500 [thread overview]
Message-ID: <20070428203716.GE4331@lixom.net> (raw)
In-Reply-To: <20070428203624.GA4331@lixom.net>
Timer and interrupt fixes:
* Be pickier with what kind of interrupts are acked to avoid the device to
get out of sync with the driver state
* Set RX count threshhold to 1 (for NAPI interrupted mode), TX count
threshold to 32.
* Set timer thresholds to current max (~16ms).
Signed-off-by: Olof Johansson <olof@lixom.net>
Index: netdev-2.6/drivers/net/pasemi_mac.c
===================================================================
--- netdev-2.6.orig/drivers/net/pasemi_mac.c
+++ netdev-2.6/drivers/net/pasemi_mac.c
@@ -526,18 +526,28 @@ static irqreturn_t pasemi_mac_rx_intr(in
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int reg;
- if (!(*mac->rx_status & PAS_STATUS_INT))
+ if (!(*mac->rx_status & PAS_STATUS_CAUSE_M))
return IRQ_NONE;
- netif_rx_schedule(dev);
- pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_COM_TIMEOUTCFG,
- PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0));
+ if (*mac->rx_status & PAS_STATUS_ERROR)
+ printk("rx_status reported error\n");
+
+ /* Don't reset packet count so it won't fire again but clear
+ * all others.
+ */
+
+ pci_read_config_dword(mac->dma_pdev, PAS_DMA_RXINT_RCMDSTA(mac->dma_if), ®);
- reg = PAS_IOB_DMA_RXCH_RESET_PINTC | PAS_IOB_DMA_RXCH_RESET_SINTC |
- PAS_IOB_DMA_RXCH_RESET_DINTC;
+ reg = 0;
+ if (*mac->rx_status & PAS_STATUS_SOFT)
+ reg |= PAS_IOB_DMA_RXCH_RESET_SINTC;
+ if (*mac->rx_status & PAS_STATUS_ERROR)
+ reg |= PAS_IOB_DMA_RXCH_RESET_DINTC;
if (*mac->rx_status & PAS_STATUS_TIMER)
reg |= PAS_IOB_DMA_RXCH_RESET_TINTC;
+ netif_rx_schedule(dev);
+
pci_write_config_dword(mac->iob_pdev,
PAS_IOB_DMA_RXCH_RESET(mac->dma_rxch), reg);
@@ -551,14 +561,17 @@ static irqreturn_t pasemi_mac_tx_intr(in
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int reg;
- if (!(*mac->tx_status & PAS_STATUS_INT))
+ if (!(*mac->tx_status & PAS_STATUS_CAUSE_M))
return IRQ_NONE;
pasemi_mac_clean_tx(mac);
- reg = PAS_IOB_DMA_TXCH_RESET_PINTC | PAS_IOB_DMA_TXCH_RESET_SINTC;
- if (*mac->tx_status & PAS_STATUS_TIMER)
- reg |= PAS_IOB_DMA_TXCH_RESET_TINTC;
+ reg = PAS_IOB_DMA_TXCH_RESET_PINTC;
+
+ if (*mac->tx_status & PAS_STATUS_SOFT)
+ reg |= PAS_IOB_DMA_TXCH_RESET_SINTC;
+ if (*mac->tx_status & PAS_STATUS_ERROR)
+ reg |= PAS_IOB_DMA_TXCH_RESET_DINTC;
pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_TXCH_RESET(mac->dma_txch),
reg);
@@ -593,14 +606,18 @@ static int pasemi_mac_open(struct net_de
flags |= PAS_MAC_CFG_PCFG_TSR_1G | PAS_MAC_CFG_PCFG_SPD_1G;
pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_RXCH_CFG(mac->dma_rxch),
- PAS_IOB_DMA_RXCH_CFG_CNTTH(30));
+ PAS_IOB_DMA_RXCH_CFG_CNTTH(1));
+
+ pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_TXCH_CFG(mac->dma_txch),
+ PAS_IOB_DMA_TXCH_CFG_CNTTH(32));
/* Clear out any residual packet count state from firmware */
pasemi_mac_restart_rx_intr(mac);
pasemi_mac_restart_tx_intr(mac);
+ /* 0xffffff is max value, about 16ms */
pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_COM_TIMEOUTCFG,
- PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(1000000));
+ PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0xffffff));
pci_write_config_dword(mac->pdev, PAS_MAC_CFG_PCFG, flags);
Index: netdev-2.6/drivers/net/pasemi_mac.h
===================================================================
--- netdev-2.6.orig/drivers/net/pasemi_mac.h
+++ netdev-2.6/drivers/net/pasemi_mac.h
@@ -299,6 +299,7 @@ enum {
#define PAS_STATUS_DCNT_S 16
#define PAS_STATUS_BPCNT_M 0x0000ffff00000000ull
#define PAS_STATUS_BPCNT_S 32
+#define PAS_STATUS_CAUSE_M 0xf000000000000000ull
#define PAS_STATUS_TIMER 0x1000000000000000ull
#define PAS_STATUS_ERROR 0x2000000000000000ull
#define PAS_STATUS_SOFT 0x4000000000000000ull
next prev parent reply other threads:[~2007-04-28 20:36 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-28 20:36 [PATCH v3] [0/10] pasemi_mac: fixes and enhancements Olof Johansson
2007-04-28 20:36 ` [PATCH v3] [1/10] pasemi_mac: A couple of minor bugfixes Olof Johansson
2007-05-08 5:02 ` Jeff Garzik
2007-04-28 20:36 ` [PATCH v3] [2/10] pasemi_mac: Move the IRQ mapping from the PCI layer to the driver Olof Johansson
2007-04-28 20:57 ` [PATCH v3] [2/10] [REAL 2/10] " Olof Johansson
2007-05-08 5:02 ` Jeff Garzik
2007-05-08 5:32 ` Olof Johansson
2007-04-28 20:37 ` [PATCH v3] [3/10] pasemi_mac: Abstract and fix up interrupt restart routines Olof Johansson
2007-04-28 20:37 ` Olof Johansson [this message]
2007-04-28 20:37 ` [PATCH v3] [5/10] pasemi_mac: Add SKB reuse / copy-break Olof Johansson
2007-04-28 20:37 ` [PATCH v3] [6/10] pasemi_mac: Minor cleanup / define fixes Olof Johansson
2007-04-28 20:37 ` [PATCH v3] [2/10] pasemi_mac: Move the IRQ mapping from the PCI layer to the driver[PATCH v3] [7/10] pasemi_mac: Logic cleanup / rx performance improvements Olof Johansson
2007-04-28 20:38 ` [PATCH v3] [8/10] pasemi_mac: Add msglevel support and "pasemi_mac_debug" module param Olof Johansson
2007-05-08 5:03 ` Jeff Garzik
2007-05-08 5:33 ` Olof Johansson
2007-04-28 20:38 ` [PATCH v3] [9/10] pasemi_mac: PHY support Olof Johansson
2007-05-08 5:03 ` Jeff Garzik
2007-04-28 20:38 ` [PATCH v3] [10/10] pasemi_mac: Use local-mac-address instead of mac-address if available Olof Johansson
2007-04-28 20:58 ` [PATCH v3] [7/10] pasemi_mac: Logic cleanup / rx performance improvements Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070428203716.GE4331@lixom.net \
--to=olof@lixom.net \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.