From: Adrian Bunk <bunk@stusta.de>
To: Giridhar Pemmasani <pgiri@yahoo.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Jaroslav Kysela <perex@suse.cz>,
Clemens Ladisch <clemens@ladisch.de>,
Takashi Iwai <tiwai@suse.de>
Subject: Re: Boot failure with 2.6.21 with snd-maestro3
Date: Sun, 29 Apr 2007 19:35:59 +0200 [thread overview]
Message-ID: <20070429173559.GP3468@stusta.de> (raw)
In-Reply-To: <944251.71448.qm@web32407.mail.mud.yahoo.com>
[-- Attachment #1: Type: text/plain, Size: 1034 bytes --]
On Sun, Apr 29, 2007 at 09:55:18AM -0700, Giridhar Pemmasani wrote:
> When snd-maestro3 (ESS Maestro 3 driver) is enabled, kernel 2.6.21 fails to
> boot - it seems to stop at various points depending on what other modules are
> enabled. Disabling snd-maestro3 fixes all issues. Moreover, with everything
> else being same, using maestro3.c from 2.6.20 kernel and using it in 2.6.21
> kernel also works - i.e., system boots fine. I will try to isolate the issue
> and follow up.
Thanks for your report.
There were only the two attached patches between 2.6.20 and 2.6.21 to
this driver:
- maestro3: add request_firmware()
- maestro3 - Use quirk list helper function
2.6.21 + 2.6.20 maestro3.c works for you.
Does 2.6.21 + 2.6.20 maestro3.c + patch-maestro3-1 work?
> Giri
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
[-- Attachment #2: patch-maestro3-1 --]
[-- Type: text/plain, Size: 4998 bytes --]
commit 81d7724a8ee84693befbd60d730199ffb3988f29
Author: Clemens Ladisch <clemens@ladisch.de>
Date: Mon Nov 6 09:26:41 2006 +0100
[ALSA] maestro3: add request_firmware()
Load the ASSP codes using request_firmware(), if possible, instead of
using the built-in blobs.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 7573997..1bcfb3a 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -587,6 +587,7 @@ config SND_KORG1212
config SND_MAESTRO3
tristate "ESS Allegro/Maestro3"
depends on SND
+ select FW_LOADER
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on ESS Maestro 3
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 6efe6d5..053ea4f 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -41,6 +41,7 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/moduleparam.h>
+#include <linux/firmware.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
@@ -48,6 +49,7 @@
#include <sound/mpu401.h>
#include <sound/ac97_codec.h>
#include <sound/initval.h>
+#include <asm/byteorder.h>
MODULE_AUTHOR("Zach Brown <zab@zabbo.net>, Takashi Iwai <tiwai@suse.de>");
MODULE_DESCRIPTION("ESS Maestro3 PCI");
@@ -864,6 +866,9 @@ struct snd_m3 {
#ifdef CONFIG_PM
u16 *suspend_mem;
#endif
+
+ const struct firmware *assp_kernel_image;
+ const struct firmware *assp_minisrc_image;
};
/*
@@ -2132,6 +2137,10 @@ static int __devinit snd_m3_mixer(struct snd_m3 *chip)
}
+#define FIRMWARE_IN_THE_KERNEL
+
+#ifdef FIRMWARE_IN_THE_KERNEL
+
/*
* DSP Code images
*/
@@ -2260,6 +2269,30 @@ static const u16 assp_minisrc_image[] = {
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
};
+static const struct firmware assp_kernel = {
+ .data = (u8 *)assp_kernel_image,
+ .size = sizeof assp_kernel_image
+};
+static const struct firmware assp_minisrc = {
+ .data = (u8 *)assp_minisrc_image,
+ .size = sizeof assp_minisrc_image
+};
+
+#endif /* FIRMWARE_IN_THE_KERNEL */
+
+#ifdef __LITTLE_ENDIAN
+static inline void snd_m3_convert_from_le(const struct firmware *fw) { }
+#else
+static void snd_m3_convert_from_le(const struct firmware *fw)
+{
+ int i;
+ u16 *data = (u16 *)fw->data;
+
+ for (i = 0; i < fw->size / 2; ++i)
+ le16_to_cpus(&data[i]);
+}
+#endif
+
/*
* initialize ASSP
@@ -2274,6 +2307,7 @@ static const u16 minisrc_lpf[MINISRC_LPF_LEN] = {
static void snd_m3_assp_init(struct snd_m3 *chip)
{
unsigned int i;
+ u16 *data;
/* zero kernel data */
for (i = 0; i < (REV_B_DATA_MEMORY_UNIT_LENGTH * NUM_UNITS_KERNEL_DATA) / 2; i++)
@@ -2291,10 +2325,10 @@ static void snd_m3_assp_init(struct snd_m3 *chip)
KDATA_DMA_XFER0);
/* write kernel into code memory.. */
- for (i = 0 ; i < ARRAY_SIZE(assp_kernel_image); i++) {
+ data = (u16 *)chip->assp_kernel_image->data;
+ for (i = 0 ; i * 2 < chip->assp_kernel_image->size; i++) {
snd_m3_assp_write(chip, MEMTYPE_INTERNAL_CODE,
- REV_B_CODE_MEMORY_BEGIN + i,
- assp_kernel_image[i]);
+ REV_B_CODE_MEMORY_BEGIN + i, data[i]);
}
/*
@@ -2303,10 +2337,10 @@ static void snd_m3_assp_init(struct snd_m3 *chip)
* drop it there. It seems that the minisrc doesn't
* need vectors, so we won't bother with them..
*/
- for (i = 0; i < ARRAY_SIZE(assp_minisrc_image); i++) {
+ data = (u16 *)chip->assp_minisrc_image->data;
+ for (i = 0; i * 2 < chip->assp_minisrc_image->size; i++) {
snd_m3_assp_write(chip, MEMTYPE_INTERNAL_CODE,
- 0x400 + i,
- assp_minisrc_image[i]);
+ 0x400 + i, data[i]);
}
/*
@@ -2553,6 +2587,15 @@ static int snd_m3_free(struct snd_m3 *chip)
if (chip->iobase)
pci_release_regions(chip->pci);
+#ifdef FIRMWARE_IN_THE_KERNEL
+ if (chip->assp_kernel_image != &assp_kernel)
+#endif
+ release_firmware(chip->assp_kernel_image);
+#ifdef FIRMWARE_IN_THE_KERNEL
+ if (chip->assp_minisrc_image != &assp_minisrc)
+#endif
+ release_firmware(chip->assp_minisrc_image);
+
pci_disable_device(chip->pci);
kfree(chip);
return 0;
@@ -2744,6 +2787,30 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
return -ENOMEM;
}
+ err = request_firmware(&chip->assp_kernel_image,
+ "ess/maestro3_assp_kernel.fw", &pci->dev);
+ if (err < 0) {
+#ifdef FIRMWARE_IN_THE_KERNEL
+ chip->assp_kernel_image = &assp_kernel;
+#else
+ snd_m3_free(chip);
+ return err;
+#endif
+ } else
+ snd_m3_convert_from_le(chip->assp_kernel_image);
+
+ err = request_firmware(&chip->assp_minisrc_image,
+ "ess/maestro3_assp_minisrc.fw", &pci->dev);
+ if (err < 0) {
+#ifdef FIRMWARE_IN_THE_KERNEL
+ chip->assp_minisrc_image = &assp_minisrc;
+#else
+ snd_m3_free(chip);
+ return err;
+#endif
+ } else
+ snd_m3_convert_from_le(chip->assp_minisrc_image);
+
if ((err = pci_request_regions(pci, card->driver)) < 0) {
snd_m3_free(chip);
return err;
[-- Attachment #3: patch-maestro3-2 --]
[-- Type: text/plain, Size: 16705 bytes --]
commit 1061eeb44493176eb1d12b47d619e61c428c4395
Author: Takashi Iwai <tiwai@suse.de>
Date: Fri Nov 24 15:36:46 2006 +0100
[ALSA] maestro3 - Use quirk list helper function
Clean up maestro3 amp and GPIO quirks using snd_pci_quirk_lookup().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 053ea4f..4526904 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -770,21 +770,6 @@ MODULE_PARM_DESC(amp_gpio, "GPIO pin number for external amp. (default = -1)");
/*
*/
-/* quirk lists */
-struct m3_quirk {
- const char *name; /* device name */
- u16 vendor, device; /* subsystem ids */
- int amp_gpio; /* gpio pin # for external amp, -1 = default */
- int irda_workaround; /* non-zero if avoid to touch 0x10 on GPIO_DIRECTION
- (e.g. for IrDA on Dell Inspirons) */
-};
-
-struct m3_hv_quirk {
- u16 vendor, device, subsystem_vendor, subsystem_device;
- u32 config; /* ALLEGRO_CONFIG hardware volume bits */
- int is_omnibook; /* Do HP OmniBook GPIO magic? */
-};
-
struct m3_list {
int curlen;
int mem_addr;
@@ -832,8 +817,6 @@ struct snd_m3 {
struct snd_pcm *pcm;
struct pci_dev *pci;
- const struct m3_quirk *quirk;
- const struct m3_hv_quirk *hv_quirk;
int dacs_active;
int timer_users;
@@ -847,7 +830,11 @@ struct snd_m3 {
u8 reset_state;
int external_amp;
- int amp_gpio;
+ int amp_gpio; /* gpio pin # for external amp, -1 = default */
+ unsigned int hv_config; /* hardware-volume config bits */
+ unsigned irda_workaround :1; /* avoid to touch 0x10 on GPIO_DIRECTION
+ (e.g. for IrDA on Dell Inspirons) */
+ unsigned is_omnibook :1; /* Do HP OmniBook GPIO magic? */
/* midi */
struct snd_rawmidi *rmidi;
@@ -896,127 +883,104 @@ static struct pci_device_id snd_m3_ids[] = {
MODULE_DEVICE_TABLE(pci, snd_m3_ids);
-static const struct m3_quirk m3_quirk_list[] = {
- /* panasonic CF-28 "toughbook" */
- {
- .name = "Panasonic CF-28",
- .vendor = 0x10f7,
- .device = 0x833e,
- .amp_gpio = 0x0d,
- },
- /* panasonic CF-72 "toughbook" */
- {
- .name = "Panasonic CF-72",
- .vendor = 0x10f7,
- .device = 0x833d,
- .amp_gpio = 0x0d,
- },
- /* Dell Inspiron 4000 */
- {
- .name = "Dell Inspiron 4000",
- .vendor = 0x1028,
- .device = 0x00b0,
- .amp_gpio = -1,
- .irda_workaround = 1,
- },
- /* Dell Inspiron 8000 */
- {
- .name = "Dell Inspiron 8000",
- .vendor = 0x1028,
- .device = 0x00a4,
- .amp_gpio = -1,
- .irda_workaround = 1,
- },
- /* Dell Inspiron 8100 */
- {
- .name = "Dell Inspiron 8100",
- .vendor = 0x1028,
- .device = 0x00e6,
- .amp_gpio = -1,
- .irda_workaround = 1,
- },
- /* NEC LM800J/7 */
- {
- .name = "NEC LM800J/7",
- .vendor = 0x1033,
- .device = 0x80f1,
- .amp_gpio = 0x03,
- },
- /* LEGEND ZhaoYang 3100CF */
- {
- .name = "LEGEND ZhaoYang 3100CF",
- .vendor = 0x1509,
- .device = 0x1740,
- .amp_gpio = 0x03,
- },
- /* END */
- { NULL }
+static struct snd_pci_quirk m3_amp_quirk_list[] __devinitdata = {
+ SND_PCI_QUIRK(0x10f7, 0x833e, "Panasonic CF-28", 0x0d),
+ SND_PCI_QUIRK(0x10f7, 0x833d, "Panasonic CF-72", 0x0d),
+ SND_PCI_QUIRK(0x1033, 0x80f1, "NEC LM800J/7", 0x03),
+ SND_PCI_QUIRK(0x1509, 0x1740, "LEGEND ZhaoYang 3100CF", 0x03),
+ { } /* END */
+};
+
+static struct snd_pci_quirk m3_irda_quirk_list[] __devinitdata = {
+ SND_PCI_QUIRK(0x1028, 0x00b0, "Dell Inspiron 4000", 1),
+ SND_PCI_QUIRK(0x1028, 0x00a4, "Dell Inspiron 8000", 1),
+ SND_PCI_QUIRK(0x1028, 0x00e6, "Dell Inspiron 8100", 1),
+ { } /* END */
};
-/* These values came from the Windows driver. */
-static const struct m3_hv_quirk m3_hv_quirk_list[] = {
+/* hardware volume quirks */
+static struct snd_pci_quirk m3_hv_quirk_list[] __devinitdata = {
/* Allegro chips */
- { 0x125D, 0x1988, 0x0E11, 0x002E, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x0E11, 0x0094, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x0E11, 0xB112, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x0E11, 0xB114, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x103C, 0x0012, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x103C, 0x0018, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x103C, 0x001C, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x103C, 0x001D, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x103C, 0x001E, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x107B, 0x3350, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x10F7, 0x8338, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x10F7, 0x833C, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x10F7, 0x833D, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x10F7, 0x833E, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x10F7, 0x833F, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x13BD, 0x1018, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x13BD, 0x1019, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x13BD, 0x101A, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x14FF, 0x0F03, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x14FF, 0x0F04, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x14FF, 0x0F05, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x156D, 0xB400, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x156D, 0xB795, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x156D, 0xB797, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x156D, 0xC700, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
- { 0x125D, 0x1988, 0x1033, 0x80F1, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x1988, 0x103C, 0x001A, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 }, /* HP OmniBook 6100 */
- { 0x125D, 0x1988, 0x107B, 0x340A, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x1988, 0x107B, 0x3450, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x1988, 0x109F, 0x3134, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x1988, 0x109F, 0x3161, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x1988, 0x144D, 0x3280, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x1988, 0x144D, 0x3281, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x1988, 0x144D, 0xC002, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x1988, 0x144D, 0xC003, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x1988, 0x1509, 0x1740, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x1988, 0x1610, 0x0010, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x1988, 0x1042, 0x1042, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1988, 0x107B, 0x9500, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1988, 0x14FF, 0x0F06, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1988, 0x1558, 0x8586, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1988, 0x161F, 0x2011, HV_CTRL_ENABLE, 0 },
+ SND_PCI_QUIRK(0x0E11, 0x002E, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x0E11, 0x0094, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x0E11, 0xB112, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x0E11, 0xB114, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x103C, 0x0012, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x103C, 0x0018, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x103C, 0x001C, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x103C, 0x001D, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x103C, 0x001E, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x107B, 0x3350, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x10F7, 0x8338, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x10F7, 0x833C, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x10F7, 0x833D, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x10F7, 0x833E, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x10F7, 0x833F, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x13BD, 0x1018, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x13BD, 0x1019, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x13BD, 0x101A, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x14FF, 0x0F03, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x14FF, 0x0F04, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x14FF, 0x0F05, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x156D, 0xB400, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x156D, 0xB795, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x156D, 0xB797, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x156D, 0xC700, NULL, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD),
+ SND_PCI_QUIRK(0x1033, 0x80F1, NULL,
+ HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x103C, 0x001A, NULL, /* HP OmniBook 6100 */
+ HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x107B, 0x340A, NULL,
+ HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x107B, 0x3450, NULL,
+ HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x109F, 0x3134, NULL,
+ HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x109F, 0x3161, NULL,
+ HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x144D, 0x3280, NULL,
+ HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x144D, 0x3281, NULL,
+ HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x144D, 0xC002, NULL,
+ HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x144D, 0xC003, NULL,
+ HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x1509, 0x1740, NULL,
+ HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x1610, 0x0010, NULL,
+ HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x1042, 0x1042, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x107B, 0x9500, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x14FF, 0x0F06, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x1558, 0x8586, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x161F, 0x2011, NULL, HV_CTRL_ENABLE),
/* Maestro3 chips */
- { 0x125D, 0x1998, 0x103C, 0x000E, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1998, 0x103C, 0x0010, HV_CTRL_ENABLE, 1 }, /* HP OmniBook 6000 */
- { 0x125D, 0x1998, 0x103C, 0x0011, HV_CTRL_ENABLE, 1 }, /* HP OmniBook 500 */
- { 0x125D, 0x1998, 0x103C, 0x001B, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1998, 0x104D, 0x80A6, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1998, 0x104D, 0x80AA, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1998, 0x107B, 0x5300, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1998, 0x110A, 0x1998, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1998, 0x13BD, 0x1015, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1998, 0x13BD, 0x101C, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1998, 0x13BD, 0x1802, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1998, 0x1599, 0x0715, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x1998, 0x5643, 0x5643, HV_CTRL_ENABLE, 0 },
- { 0x125D, 0x199A, 0x144D, 0x3260, HV_CTRL_ENABLE | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x199A, 0x144D, 0x3261, HV_CTRL_ENABLE | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x199A, 0x144D, 0xC000, HV_CTRL_ENABLE | REDUCED_DEBOUNCE, 0 },
- { 0x125D, 0x199A, 0x144D, 0xC001, HV_CTRL_ENABLE | REDUCED_DEBOUNCE, 0 },
- { 0 }
+ SND_PCI_QUIRK(0x103C, 0x000E, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x103C, 0x0010, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x103C, 0x0011, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x103C, 0x001B, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x104D, 0x80A6, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x104D, 0x80AA, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x107B, 0x5300, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x110A, 0x1998, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x13BD, 0x1015, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x13BD, 0x101C, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x13BD, 0x1802, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x1599, 0x0715, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x5643, 0x5643, NULL, HV_CTRL_ENABLE),
+ SND_PCI_QUIRK(0x144D, 0x3260, NULL, HV_CTRL_ENABLE | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x144D, 0x3261, NULL, HV_CTRL_ENABLE | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x144D, 0xC000, NULL, HV_CTRL_ENABLE | REDUCED_DEBOUNCE),
+ SND_PCI_QUIRK(0x144D, 0xC001, NULL, HV_CTRL_ENABLE | REDUCED_DEBOUNCE),
+ { } /* END */
+};
+
+/* HP Omnibook quirks */
+static struct snd_pci_quirk m3_omnibook_quirk_list[] __devinitdata = {
+ SND_PCI_QUIRK_ID(0x103c, 0x0010), /* HP OmniBook 6000 */
+ SND_PCI_QUIRK_ID(0x103c, 0x0011), /* HP OmniBook 500 */
+ { } /* END */
};
/*
@@ -2055,7 +2019,7 @@ static void snd_m3_ac97_reset(struct snd_m3 *chip)
for (i = 0; i < 5; i++) {
dir = inw(io + GPIO_DIRECTION);
- if (! chip->quirk || ! chip->quirk->irda_workaround)
+ if (!chip->irda_workaround)
dir |= 0x10; /* assuming pci bus master? */
snd_m3_remote_codec_config(io, 0);
@@ -2478,7 +2442,7 @@ snd_m3_chip_init(struct snd_m3 *chip)
DISABLE_LEGACY);
pci_write_config_word(pcidev, PCI_LEGACY_AUDIO_CTRL, w);
- if (chip->hv_quirk && chip->hv_quirk->is_omnibook) {
+ if (chip->is_omnibook) {
/*
* Volume buttons on some HP OmniBook laptops don't work
* correctly. This makes them work for the most part.
@@ -2495,8 +2459,7 @@ snd_m3_chip_init(struct snd_m3 *chip)
}
pci_read_config_dword(pcidev, PCI_ALLEGRO_CONFIG, &n);
n &= ~(HV_CTRL_ENABLE | REDUCED_DEBOUNCE | HV_BUTTON_FROM_GD);
- if (chip->hv_quirk)
- n |= chip->hv_quirk->config;
+ n |= chip->hv_config;
/* For some reason we must always use reduced debounce. */
n |= REDUCED_DEBOUNCE;
n |= PM_CTRL_ENABLE | CLK_DIV_BY_49 | USE_PCI_TIMING;
@@ -2544,7 +2507,7 @@ snd_m3_enable_ints(struct snd_m3 *chip)
/* TODO: MPU401 not supported yet */
val = ASSP_INT_ENABLE /*| MPU401_INT_ENABLE*/;
- if (chip->hv_quirk && (chip->hv_quirk->config & HV_CTRL_ENABLE))
+ if (chip->hv_config & HV_CTRL_ENABLE)
val |= HV_INT_ENABLE;
outw(val, io + HOST_INT_CTRL);
outb(inb(io + ASSP_CONTROL_C) | ASSP_HOST_INT_ENABLE,
@@ -2708,8 +2671,7 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
{
struct snd_m3 *chip;
int i, err;
- const struct m3_quirk *quirk;
- const struct m3_hv_quirk *hv_quirk;
+ const struct snd_pci_quirk *quirk;
static struct snd_device_ops ops = {
.dev_free = snd_m3_dev_free,
};
@@ -2749,34 +2711,32 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
chip->pci = pci;
chip->irq = -1;
- for (quirk = m3_quirk_list; quirk->vendor; quirk++) {
- if (pci->subsystem_vendor == quirk->vendor &&
- pci->subsystem_device == quirk->device) {
- printk(KERN_INFO "maestro3: enabled hack for '%s'\n", quirk->name);
- chip->quirk = quirk;
- break;
- }
- }
-
- for (hv_quirk = m3_hv_quirk_list; hv_quirk->vendor; hv_quirk++) {
- if (pci->vendor == hv_quirk->vendor &&
- pci->device == hv_quirk->device &&
- pci->subsystem_vendor == hv_quirk->subsystem_vendor &&
- pci->subsystem_device == hv_quirk->subsystem_device) {
- chip->hv_quirk = hv_quirk;
- break;
- }
- }
-
chip->external_amp = enable_amp;
if (amp_gpio >= 0 && amp_gpio <= 0x0f)
chip->amp_gpio = amp_gpio;
- else if (chip->quirk && chip->quirk->amp_gpio >= 0)
- chip->amp_gpio = chip->quirk->amp_gpio;
- else if (chip->allegro_flag)
- chip->amp_gpio = GPO_EXT_AMP_ALLEGRO;
- else /* presumably this is for all 'maestro3's.. */
- chip->amp_gpio = GPO_EXT_AMP_M3;
+ else {
+ quirk = snd_pci_quirk_lookup(pci, m3_amp_quirk_list);
+ if (quirk) {
+ snd_printdd(KERN_INFO "maestro3: set amp-gpio "
+ "for '%s'\n", quirk->name);
+ chip->amp_gpio = quirk->value;
+ } else if (chip->allegro_flag)
+ chip->amp_gpio = GPO_EXT_AMP_ALLEGRO;
+ else /* presumably this is for all 'maestro3's.. */
+ chip->amp_gpio = GPO_EXT_AMP_M3;
+ }
+
+ quirk = snd_pci_quirk_lookup(pci, m3_irda_quirk_list);
+ if (quirk) {
+ snd_printdd(KERN_INFO "maestro3: enabled irda workaround "
+ "for '%s'\n", quirk->name);
+ chip->irda_workaround = 1;
+ }
+ quirk = snd_pci_quirk_lookup(pci, m3_hv_quirk_list);
+ if (quirk)
+ chip->hv_config = quirk->value;
+ if (snd_pci_quirk_lookup(pci, m3_omnibook_quirk_list))
+ chip->is_omnibook = 1;
chip->num_substreams = NR_DSPS;
chip->substreams = kcalloc(chip->num_substreams, sizeof(struct m3_dma),
next prev parent reply other threads:[~2007-04-29 17:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-29 16:55 Boot failure with 2.6.21 with snd-maestro3 Giridhar Pemmasani
2007-04-29 17:35 ` Adrian Bunk [this message]
2007-04-29 21:09 ` Giridhar Pemmasani
2007-05-02 9:58 ` Takashi Iwai
2007-05-02 9:58 ` [alsa-devel] " Takashi Iwai
2007-04-29 17:40 ` Michal Piotrowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070429173559.GP3468@stusta.de \
--to=bunk@stusta.de \
--cc=clemens@ladisch.de \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@suse.cz \
--cc=pgiri@yahoo.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.