From: Dan Williams <dan.j.williams@intel.com>
To: neilb@suse.de, akpm@linux-foundation.org, christopher.leech@intel.com
Cc: linux-kernel@vger.kernel.org, linux-raid@vger.kernel.org
Subject: [PATCH 13/16] md: remove raid5 compute_block and compute_parity5
Date: Tue, 01 May 2007 23:21:11 -0700 [thread overview]
Message-ID: <20070502062111.7066.17692.stgit@dwillia2-linux.ch.intel.com> (raw)
In-Reply-To: <20070502060949.7066.357.stgit@dwillia2-linux.ch.intel.com>
replaced by raid5_run_ops
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/md/raid5.c | 124 ----------------------------------------------------
1 files changed, 0 insertions(+), 124 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c9b91e3..74ce354 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1501,130 +1501,6 @@ static void copy_data(int frombio, struct bio *bio,
} \
} while(0)
-
-static void compute_block(struct stripe_head *sh, int dd_idx)
-{
- int i, count, disks = sh->disks;
- void *ptr[MAX_XOR_BLOCKS], *dest, *p;
-
- PRINTK("compute_block, stripe %llu, idx %d\n",
- (unsigned long long)sh->sector, dd_idx);
-
- dest = page_address(sh->dev[dd_idx].page);
- memset(dest, 0, STRIPE_SIZE);
- count = 0;
- for (i = disks ; i--; ) {
- if (i == dd_idx)
- continue;
- p = page_address(sh->dev[i].page);
- if (test_bit(R5_UPTODATE, &sh->dev[i].flags))
- ptr[count++] = p;
- else
- printk(KERN_ERR "compute_block() %d, stripe %llu, %d"
- " not present\n", dd_idx,
- (unsigned long long)sh->sector, i);
-
- check_xor();
- }
- if (count)
- xor_block(count, STRIPE_SIZE, dest, ptr);
- set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
-}
-
-static void compute_parity5(struct stripe_head *sh, int method)
-{
- raid5_conf_t *conf = sh->raid_conf;
- int i, pd_idx = sh->pd_idx, disks = sh->disks, count;
- void *ptr[MAX_XOR_BLOCKS], *dest;
- struct bio *chosen;
-
- PRINTK("compute_parity5, stripe %llu, method %d\n",
- (unsigned long long)sh->sector, method);
-
- count = 0;
- dest = page_address(sh->dev[pd_idx].page);
- switch(method) {
- case READ_MODIFY_WRITE:
- BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags));
- for (i=disks ; i-- ;) {
- if (i==pd_idx)
- continue;
- if (sh->dev[i].towrite &&
- test_bit(R5_UPTODATE, &sh->dev[i].flags)) {
- ptr[count++] = page_address(sh->dev[i].page);
- chosen = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- BUG_ON(sh->dev[i].written);
- sh->dev[i].written = chosen;
- check_xor();
- }
- }
- break;
- case RECONSTRUCT_WRITE:
- memset(dest, 0, STRIPE_SIZE);
- for (i= disks; i-- ;)
- if (i!=pd_idx && sh->dev[i].towrite) {
- chosen = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- BUG_ON(sh->dev[i].written);
- sh->dev[i].written = chosen;
- }
- break;
- case CHECK_PARITY:
- break;
- }
- if (count) {
- xor_block(count, STRIPE_SIZE, dest, ptr);
- count = 0;
- }
-
- for (i = disks; i--;)
- if (sh->dev[i].written) {
- sector_t sector = sh->dev[i].sector;
- struct bio *wbi = sh->dev[i].written;
- while (wbi && wbi->bi_sector < sector + STRIPE_SECTORS) {
- copy_data(1, wbi, sh->dev[i].page, sector);
- wbi = r5_next_bio(wbi, sector);
- }
-
- set_bit(R5_LOCKED, &sh->dev[i].flags);
- set_bit(R5_UPTODATE, &sh->dev[i].flags);
- }
-
- switch(method) {
- case RECONSTRUCT_WRITE:
- case CHECK_PARITY:
- for (i=disks; i--;)
- if (i != pd_idx) {
- ptr[count++] = page_address(sh->dev[i].page);
- check_xor();
- }
- break;
- case READ_MODIFY_WRITE:
- for (i = disks; i--;)
- if (sh->dev[i].written) {
- ptr[count++] = page_address(sh->dev[i].page);
- check_xor();
- }
- }
- if (count)
- xor_block(count, STRIPE_SIZE, dest, ptr);
-
- if (method != CHECK_PARITY) {
- set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
- set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
- } else
- clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
-}
-
static void compute_parity6(struct stripe_head *sh, int method)
{
raid6_conf_t *conf = sh->raid_conf;
next prev parent reply other threads:[~2007-05-02 6:21 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-02 6:14 [PATCH 00/16] raid acceleration and asynchronous offload api for 2.6.22 Dan Williams
2007-05-02 6:15 ` [PATCH 01/16] dmaengine: add base support for the async_tx api Dan Williams
2007-05-02 6:15 ` [PATCH 02/16] dmaengine: move channel management to the client Dan Williams
2007-05-02 6:16 ` [PATCH 03/16] ARM: Add drivers/dma to arch/arm/Kconfig Dan Williams
2007-05-02 6:16 ` [PATCH 04/16] dmaengine: add the async_tx api Dan Williams
2007-05-02 6:17 ` [PATCH 05/16] md: add raid5_run_ops and support routines Dan Williams
2007-05-02 6:17 ` [PATCH 06/16] md: use raid5_run_ops for stripe cache operations Dan Williams
2007-05-02 6:18 ` [PATCH 07/16] md: move write operations to raid5_run_ops Dan Williams
2007-05-02 6:18 ` [PATCH 08/16] md: move raid5 compute block " Dan Williams
2007-05-02 6:19 ` [PATCH 09/16] md: move raid5 parity checks " Dan Williams
2007-05-02 6:19 ` [PATCH 10/16] md: satisfy raid5 read requests via raid5_run_ops Dan Williams
2007-05-02 6:20 ` [PATCH 11/16] md: use async_tx and raid5_run_ops for raid5 expansion operations Dan Williams
2007-05-02 6:20 ` [PATCH 12/16] md: move raid5 io requests to raid5_run_ops Dan Williams
2007-05-02 6:21 ` Dan Williams [this message]
2007-05-02 6:21 ` [PATCH 14/16] dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines Dan Williams
2007-05-02 6:22 ` [PATCH 15/16] iop13xx: Surface the iop13xx adma units to the iop-adma driver Dan Williams
2007-05-02 6:22 ` [PATCH 16/16] iop3xx: Surface the iop3xx DMA and AAU " Dan Williams
2007-05-02 6:55 ` [PATCH 00/16] raid acceleration and asynchronous offload api for 2.6.22 Nick Piggin
2007-05-02 15:45 ` Williams, Dan J
2007-05-02 15:45 ` Williams, Dan J
2007-05-02 15:55 ` Justin Piszcz
2007-05-02 16:17 ` Williams, Dan J
2007-05-02 16:17 ` Williams, Dan J
2007-05-02 16:19 ` Justin Piszcz
2007-05-02 16:36 ` Dagfinn Ilmari Mannsåker
2007-05-02 16:36 ` Dagfinn Ilmari Mannsåker
2007-05-02 16:42 ` Williams, Dan J
2007-05-02 16:42 ` Williams, Dan J
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070502062111.7066.17692.stgit@dwillia2-linux.ch.intel.com \
--to=dan.j.williams@intel.com \
--cc=akpm@linux-foundation.org \
--cc=christopher.leech@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.