From: Stephen Hemminger <shemminger@linux-foundation.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org
Cc: Greg KH <greg@kroah.com>
Subject: [PATCH 16/17] sky2: make sure high DMA bits set
Date: Tue, 08 May 2007 20:50:05 -0700 [thread overview]
Message-ID: <20070509035031.155434136@linux-foundation.org> (raw)
In-Reply-To: 20070509034949.624934448@linux-foundation.org
[-- Attachment #1: sky2-force64.patch --]
[-- Type: text/plain, Size: 5769 bytes --]
Be more frugal on memory on 32bit platforms (less rx elements are needed),
and make sure high DMA bits are set on 64bit platforms.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
---
drivers/net/sky2.c | 62 ++++++++++++++++++++++++++++++++++++-----------------
drivers/net/sky2.h | 2 -
2 files changed, 43 insertions(+), 21 deletions(-)
--- sky2-2.6.21.orig/drivers/net/sky2.c 2007-05-08 16:09:03.000000000 -0700
+++ sky2-2.6.21/drivers/net/sky2.c 2007-05-08 16:10:41.000000000 -0700
@@ -61,9 +61,11 @@
* similar to Tigon3.
*/
-#define RX_LE_SIZE 1024
-#define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
-#define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
+#define NDMA_LE (sizeof(dma_addr_t)/sizeof(u32))
+
+#define RX_LE_SIZE (512 * NDMA_LE)
+#define RX_LE_BYTES (RX_LE_SIZE * sizeof(struct sky2_rx_le))
+#define RX_MAX_PENDING 500
#define RX_DEF_PENDING RX_MAX_PENDING
#define RX_SKB_ALIGN 8
#define RX_BUF_WRITE 16
@@ -71,7 +73,7 @@
#define TX_RING_SIZE 512
#define TX_DEF_PENDING (TX_RING_SIZE - 1)
#define TX_MIN_PENDING 64
-#define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
+#define MAX_SKB_TX_LE (2 + (NDMA_LE * (MAX_SKB_FRAGS + 1)))
#define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */
#define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le))
@@ -826,7 +828,6 @@ static inline struct sky2_tx_le *get_tx_
struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE);
- le->ctrl = 0;
return le;
}
@@ -866,13 +867,14 @@ static void sky2_rx_add(struct sky2_port
dma_addr_t map, unsigned len)
{
struct sky2_rx_le *le;
- u32 hi = high32(map);
- if (sky2->rx_addr64 != hi) {
+ if (sizeof(map) > sizeof(u32)) {
+ u32 hi = high32(map);
+
le = sky2_next_rx(sky2);
le->addr = cpu_to_le32(hi);
+ le->ctrl = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->rx_addr64 = high32(map + len);
}
le = sky2_next_rx(sky2);
@@ -1168,6 +1170,14 @@ static int sky2_rx_start(struct sky2_por
}
sky2->rx_data_size = size;
+ /* On 32bit platforms high bits always zero */
+ if (sizeof(dma_addr_t) == sizeof(u32)) {
+ struct sky2_rx_le *le = sky2_next_rx(sky2);
+ le->addr = 0;
+ le->ctrl = 0;
+ le->opcode = OP_ADDR64 | HW_OWNER;
+ }
+
/* Fill Rx ring */
for (i = 0; i < sky2->rx_pending; i++) {
re = sky2->rx_ring + i;
@@ -1287,6 +1297,14 @@ static int sky2_up(struct net_device *de
&& hw->chip_rev == CHIP_REV_YU_EC_U_A0)
sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV);
+ /* Initial high bits to zero */
+ if (sizeof(dma_addr_t) == sizeof(u32)) {
+ struct sky2_tx_le *le = get_tx_le(sky2);
+ le->addr = 0;
+ le->ctrl = 0;
+ le->opcode = OP_ADDR64 | HW_OWNER;
+ }
+
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
TX_RING_SIZE - 1);
@@ -1336,13 +1354,16 @@ static inline int tx_avail(const struct
/* Estimate of number of transmit list elements required */
static unsigned tx_le_req(const struct sk_buff *skb)
{
- unsigned count;
+ unsigned count = NDMA_LE; /* OP_PACKET */
- count = sizeof(dma_addr_t) / sizeof(u32);
- count += skb_shinfo(skb)->nr_frags * count;
+ count += skb_shinfo(skb)->nr_frags * NDMA_LE; /* OP_BUFFER */
if (skb_is_gso(skb))
++count;
+#ifdef SKY2_VLAN_TAG_USED
+ else if (vlan_tx_tag_present(skb))
+ ++count;
+#endif
if (skb->ip_summed == CHECKSUM_PARTIAL)
++count;
@@ -1379,12 +1400,11 @@ static int sky2_xmit_frame(struct sk_buf
mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
addr64 = high32(mapping);
- /* Send high bits if changed or crosses boundary */
- if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) {
+ if (sizeof(mapping) > sizeof(u32)) {
le = get_tx_le(sky2);
le->addr = cpu_to_le32(addr64);
+ le->ctrl = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->tx_addr64 = high32(mapping + len);
}
/* Check for TCP Segmentation Offload */
@@ -1398,6 +1418,7 @@ static int sky2_xmit_frame(struct sk_buf
le = get_tx_le(sky2);
le->addr = cpu_to_le32(mss);
le->opcode = OP_LRGLEN | HW_OWNER;
+ le->ctrl = 0;
sky2->tx_last_mss = mss;
}
}
@@ -1410,6 +1431,7 @@ static int sky2_xmit_frame(struct sk_buf
le = get_tx_le(sky2);
le->addr = 0;
le->opcode = OP_VLAN | HW_OWNER;
+ le->ctrl = 0;
} else
le->opcode |= OP_VLAN;
le->length = cpu_to_be16(vlan_tx_tag_get(skb));
@@ -1453,16 +1475,18 @@ static int sky2_xmit_frame(struct sk_buf
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ u32 hi;
mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
frag->size, PCI_DMA_TODEVICE);
- addr64 = high32(mapping);
- if (addr64 != sky2->tx_addr64) {
+ hi = high32(mapping);
+
+ if (addr64 != hi) {
le = get_tx_le(sky2);
- le->addr = cpu_to_le32(addr64);
- le->ctrl = 0;
+ le->addr = cpu_to_le32(hi);
le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->tx_addr64 = addr64;
+ le->ctrl = 0;
+ addr64 = hi;
}
le = get_tx_le(sky2);
--- sky2-2.6.21.orig/drivers/net/sky2.h 2007-05-08 16:10:50.000000000 -0700
+++ sky2-2.6.21/drivers/net/sky2.h 2007-05-08 16:10:58.000000000 -0700
@@ -1717,14 +1717,12 @@ struct sky2_port {
struct sky2_tx_le *tx_le;
u16 tx_cons; /* next le to check */
u16 tx_prod; /* next le to use */
- u32 tx_addr64;
u16 tx_pending;
u16 tx_last_mss;
u32 tx_tcpsum;
struct rx_ring_info *rx_ring ____cacheline_aligned_in_smp;
struct sky2_rx_le *rx_le;
- u32 rx_addr64;
u16 rx_next; /* next re to check */
u16 rx_put; /* next le index to use */
u16 rx_pending;
--
next prev parent reply other threads:[~2007-05-09 4:09 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-09 3:49 [PATCH 00/17] sky2 update for 2.6.22 Stephen Hemminger
2007-05-09 3:49 ` [PATCH 01/17] sky2: fix oops on shutdown Stephen Hemminger
2007-05-09 3:49 ` [PATCH 02/17] sky2: dont restrict config space access Stephen Hemminger
2007-05-09 3:49 ` [PATCH 03/17] sky2: keep track of receive alloc failures Stephen Hemminger
2007-05-09 3:49 ` [PATCH 04/17] sky2: remove dual port workaround Stephen Hemminger
2007-05-09 3:49 ` [PATCH 05/17] pci: advanced error reporting stub return values Stephen Hemminger
2007-05-10 15:48 ` Stephen Hemminger
2007-05-09 3:49 ` [PATCH 06/17] sky2: advanced error reporting Stephen Hemminger
2007-05-09 17:05 ` Linas Vepstas
2007-05-09 22:35 ` Stephen Hemminger
2007-05-09 3:49 ` [PATCH 07/17] sky2: use pci_config access functions Stephen Hemminger
2007-05-09 3:49 ` [PATCH 08/17] sky2: MIB counter overflow handling Stephen Hemminger
2007-05-09 3:49 ` [PATCH 09/17] sky2: memory barriers change Stephen Hemminger
2007-05-09 3:49 ` [PATCH 10/17] sky2: add prefetch for next skb on receive Stephen Hemminger
2007-05-09 3:50 ` [PATCH 11/17] sky2: use MII defines Stephen Hemminger
2007-05-09 3:50 ` [PATCH 12/17] sky2: chip id enum Stephen Hemminger
2007-05-09 3:50 ` [PATCH 13/17] sky2: whitespace cleanups Stephen Hemminger
2007-05-09 3:50 ` [PATCH 14/17] pci_wake_enabled function Stephen Hemminger
2007-05-09 3:50 ` [PATCH 15/17] sky2: only disable 88e8056 on some boards Stephen Hemminger
2007-05-09 3:50 ` Stephen Hemminger [this message]
2007-05-09 3:50 ` [PATCH 17/17] sky2: version 1.15 Stephen Hemminger
2007-05-09 4:16 ` [PATCH 00/17] sky2 update for 2.6.22 Jeff Garzik
2007-05-09 14:48 ` Stephen Hemminger
2007-05-09 23:27 ` Jeff Garzik
2007-05-10 5:08 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070509035031.155434136@linux-foundation.org \
--to=shemminger@linux-foundation.org \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.