[U-Boot-Users] [PATCH] One more patch for the sequoia --- This time to get a fater EBC on newer 666.66 MHz processors

[Stefan Roese <sr@denx.de>]

Hi Jeff,

On Tuesday 08 May 2007, Jeff Mann wrote:
> [PATCH] Because the Sequoia board does not boot with an EBC faster than
> 66MHz,
> the clock divider are changed after the initial boot process.
>
> This allows for maximum clocking speeds  to be achieved on newer boards.
> Sequoia boards with 666.66 MHz processors require that the EBC divider
> be set
> to 3 in order to start the initial boot process at a slower EBC speed.
> After
> the initial boot process, the divider can be set back to 2, which will
> cause the
> boards to run at 83.333MHz. This is backward compatible with boards with
>
> 533.33 MHz processors, as these boards will already be set with an EBC
> divider
> of 2.
>
> Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
> ---
> Stefan: how's my formating this time?

Additional to Wolfgang's comments:

- Your mailer has wrapped the commit text above. Please you shorter
  lines next time
- The subject line is still way too long. Please try to find a short
  one line subject for the patch like:
  "[PATCH] ppc4xx: Fix Sequoia EBC configuration for new board revision"

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
=====================================================================