From: Domen Puncer <domen@coderock.org>
To: David Brownell <dbrownell@users.sourceforge.net>
Cc: spi-devel-general@lists.sourceforge.net,
Dragos Carp <dragos.carp@toptica.com>,
linuxppc-embedded@ozlabs.org
Subject: [PATCH] mpc52xx_psc_spi: fix it for CONFIG_PPC_MERGE
Date: Wed, 16 May 2007 09:37:07 +0200 [thread overview]
Message-ID: <20070516073707.GD9667@nd47.coderock.org> (raw)
Fix mpc5200 PSC SPI driver to actually work for CONFIG_PPC_MERGE
- s/mpc52xx/mpc5200/, as this was changed in device tree some time ago
- fix spi id detection
Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
---
drivers/spi/mpc52xx_psc_spi.c | 25 +++++++++++--------------
1 file changed, 11 insertions(+), 14 deletions(-)
Index: work-powerpc.git/drivers/spi/mpc52xx_psc_spi.c
===================================================================
--- work-powerpc.git.orig/drivers/spi/mpc52xx_psc_spi.c
+++ work-powerpc.git/drivers/spi/mpc52xx_psc_spi.c
@@ -329,8 +329,8 @@ static int mpc52xx_psc_spi_port_config(i
int ret = 0;
#if defined(CONFIG_PPC_MERGE)
- cdm = mpc52xx_find_and_map("mpc52xx-cdm");
- gpio = mpc52xx_find_and_map("mpc52xx-gpio");
+ cdm = mpc52xx_find_and_map("mpc5200-cdm");
+ gpio = mpc52xx_find_and_map("mpc5200-gpio");
#else
cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
@@ -445,9 +445,6 @@ static int __init mpc52xx_psc_spi_do_pro
struct spi_master *master;
int ret;
- if (pdata == NULL)
- return -ENODEV;
-
master = spi_alloc_master(dev, sizeof *mps);
if (master == NULL)
return -ENOMEM;
@@ -594,17 +591,17 @@ static int __init mpc52xx_psc_spi_of_pro
}
regaddr64 = of_translate_address(op->node, regaddr_p);
+ /* get PSC id (1..6, used by port_config) */
if (op->dev.platform_data == NULL) {
- struct device_node *np;
- int i = 0;
+ const u32 *psc_nump;
- for_each_node_by_type(np, "spi") {
- if (of_find_device_by_node(np) == op) {
- id = i;
- break;
- }
- i++;
+ psc_nump = of_get_property(op->node, "cell-index", NULL);
+ if (!psc_nump || *psc_nump > 5) {
+ printk(KERN_ERR "mpc52xx_psc_spi: Device node %s has invalid "
+ "cell-index property\n", op->node->full_name);
+ return -EINVAL;
}
+ id = *psc_nump + 1;
}
return mpc52xx_psc_spi_do_probe(&op->dev, (u32)regaddr64, (u32)size64,
@@ -617,7 +614,7 @@ static int __exit mpc52xx_psc_spi_of_rem
}
static struct of_device_id mpc52xx_psc_spi_of_match[] = {
- { .type = "spi", .compatible = "mpc52xx-psc-spi", },
+ { .type = "spi", .compatible = "mpc5200-psc-spi", },
{},
};
next reply other threads:[~2007-05-16 7:37 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-16 7:37 Domen Puncer [this message]
2007-05-16 8:19 ` [PATCH] mpc52xx_psc_spi: fix it for CONFIG_PPC_MERGE Sylvain Munaut
2007-05-16 16:11 ` David Brownell
2007-05-16 16:34 ` Sylvain Munaut
2007-05-18 7:44 ` Dragos Carp
2007-05-25 8:43 ` [RFC 1/3] " Domen Puncer
2007-05-25 14:50 ` Sylvain Munaut
2007-05-25 17:02 ` Grant Likely
2007-05-25 8:45 ` [RFC 2/3] " Domen Puncer
2007-05-25 8:47 ` [RFC 3/3] " Domen Puncer
2007-05-25 16:34 ` David Brownell
2007-05-25 18:00 ` Domen Puncer
[not found] ` <20070516073707.GD9667-yTFm/CsSGdPT0JcTxXCzFdi2O/JbrIOy@public.gmane.org>
2007-05-21 7:31 ` Dragos Carp
2007-05-21 7:31 ` Dragos Carp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070516073707.GD9667@nd47.coderock.org \
--to=domen@coderock.org \
--cc=dbrownell@users.sourceforge.net \
--cc=dragos.carp@toptica.com \
--cc=linuxppc-embedded@ozlabs.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.