From: Stefan Roese <sr@denx.de>
To: linuxppc-embedded@ozlabs.org
Cc: Leonid <Leonid@a-k-a.net>, Frank Prepelica <Frank.Prepelica@ubidyne.com>
Subject: Re: BDI2000 configuration file for MPC8313E-RDB
Date: Fri, 18 May 2007 21:04:09 +0200 [thread overview]
Message-ID: <200705182104.09993.sr@denx.de> (raw)
In-Reply-To: <406A31B117F2734987636D6CCC93EE3C017BA668@ehost011-3.exch011.intermedia.net>
On Friday 18 May 2007, Leonid wrote:
> See, it's not a question that BDI2000 can be used with board which has
> NAND flash on it, just it's not capable of NAND direct programming as it
> does in the case of NOR flash.
Yes, "direct" NAND programming via BDI2000 is not possible. At least not at
the moment with the current firmware versions.
> I also have AMCC Sequoia board with both NOR and NAND flash. On this
> board you can boot u-boot from NOR first and use it to program NAND.
Correct.
Just a side note: You can also boot the Sequoia from NAND directly if you have
programmed the NAND U-Boot version for the Sequoia, as the 440EP(x) supports
direct NAND booting.
Best regards,
Stefan
next prev parent reply other threads:[~2007-05-18 19:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-18 6:00 AW: BDI2000 configuration file for MPC8313E-RDB Frank Prepelica
2007-05-18 16:54 ` Leonid
2007-05-18 19:04 ` Stefan Roese [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-05-29 10:08 Frank Prepelica
2007-05-21 7:25 Frank Prepelica
2007-05-21 15:27 ` Leonid
2007-05-16 14:25 Frank Prepelica
2007-05-16 20:37 ` Leonid
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200705182104.09993.sr@denx.de \
--to=sr@denx.de \
--cc=Frank.Prepelica@ubidyne.com \
--cc=Leonid@a-k-a.net \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.