From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Blocking network in ixp425
Date: Wed, 6 Jun 2007 09:36:17 +0200 [thread overview]
Message-ID: <200706060936.17357.sr@denx.de> (raw)
In-Reply-To: <330EC2471BF24E48B513AF1A6975EB690C8276@MAIL-UA.ccs.local>
On Wednesday 06 June 2007, Teemu Keskinarkaus wrote:
> > So *are* you using the official U-Boot version? Or is this some
> > development
> > from your company that's not available in the official repository?
>
> As a base there is U-boot version 1.1.2 and then there has been added
> support for some proprietary protocols. Plus the networking for ixp425
> is taken from Redboot(I don't know why, maybe back then it was easiest
> way?). And no, the version I'm using is not publicly available.
So you are asking for support here, for some code that we don't know and don't
have access to?
> > > right driver would work little better with the timeouts. I tested
> > > yesterday and timeout didn't occur and I waited 15-20minutes.
> >
> > Timeouts didn't occur means "tftp" commands is hanging? Or what do you
> > mean?
>
> I have taken the original proprietary protocol handler code from another
> U-boot(that's version, not so surprisingly, is 1.1.2) that was working
> on different platform. It calls eth_rx - function and by design of the
> code I can see that the eth_rx does not block on that platform like it
> does on ixp425.
>
> So, eth_rx - call does not timeout on ixp425 platform. There is no log
> to send other than that I have prints before and after the eth_rx and
> the later print never shows if for example the network cable is not
> connected and nothing goes to ixp425. I also tested with tftp. During
> transfer I disconnected the network cable. Transfer stopped, but no 'T'
> (for timeout?) appeared or should they?
Yes, they should appear.
Again I ask you to give the official version a try.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
next prev parent reply other threads:[~2007-06-06 7:36 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-05 8:49 [U-Boot-Users] Blocking network in ixp425 Teemu Keskinarkaus
2007-06-05 9:05 ` Stefan Roese
2007-06-05 9:21 ` Teemu Keskinarkaus
2007-06-05 10:01 ` Stefan Roese
2007-06-06 4:26 ` Teemu Keskinarkaus
2007-06-06 5:19 ` Stefan Roese
2007-06-06 6:07 ` Teemu Keskinarkaus
2007-06-06 7:36 ` Stefan Roese [this message]
2007-06-06 8:33 ` Teemu Keskinarkaus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200706060936.17357.sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.