From: Ralf Baechle <ralf@linux-mips.org>
To: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: linux-mips@linux-mips.org
Subject: Re: smp_mb() in asm-mips/bitops.h
Date: Thu, 7 Jun 2007 13:23:44 +0100 [thread overview]
Message-ID: <20070607122344.GD26047@linux-mips.org> (raw)
In-Reply-To: <20070607.165301.63743560.nemoto@toshiba-tops.co.jp>
On Thu, Jun 07, 2007 at 04:53:01PM +0900, Atsushi Nemoto wrote:
> I found some funny usages of smp_mb() in asm-mips/bitops.h:
Funny indeed ;-) Below patch should do the trick.
Due to very inagressive memory reordering on the few non-strongly ordered
MIPS SMP systems I am somewhat confident this didn't break anything but
if so, Sibyte and PMC-Sierra RM9000 SMP systems are affected.
Ralf
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
index d995413..ffe245b 100644
--- a/include/asm-mips/bitops.h
+++ b/include/asm-mips/bitops.h
@@ -238,10 +238,11 @@ static inline int test_and_set_bit(unsigned long nr,
volatile unsigned long *addr)
{
unsigned short bit = nr & SZLONG_MASK;
+ unsigned long res;
if (cpu_has_llsc && R10000_LLSC_WAR) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
- unsigned long temp, res;
+ unsigned long temp;
__asm__ __volatile__(
" .set mips3 \n"
@@ -254,11 +255,9 @@ static inline int test_and_set_bit(unsigned long nr,
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << bit), "m" (*m)
: "memory");
-
- return res != 0;
} else if (cpu_has_llsc) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
- unsigned long temp, res;
+ unsigned long temp;
__asm__ __volatile__(
" .set push \n"
@@ -277,25 +276,22 @@ static inline int test_and_set_bit(unsigned long nr,
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << bit), "m" (*m)
: "memory");
-
- return res != 0;
} else {
volatile unsigned long *a = addr;
unsigned long mask;
- int retval;
unsigned long flags;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- retval = (mask & *a) != 0;
+ res = (mask & *a);
*a |= mask;
raw_local_irq_restore(flags);
-
- return retval;
}
smp_mb();
+
+ return res != 0;
}
/*
@@ -310,6 +306,7 @@ static inline int test_and_clear_bit(unsigned long nr,
volatile unsigned long *addr)
{
unsigned short bit = nr & SZLONG_MASK;
+ unsigned long res;
if (cpu_has_llsc && R10000_LLSC_WAR) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
@@ -327,12 +324,10 @@ static inline int test_and_clear_bit(unsigned long nr,
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << bit), "m" (*m)
: "memory");
-
- return res != 0;
#ifdef CONFIG_CPU_MIPSR2
} else if (__builtin_constant_p(nr)) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
- unsigned long temp, res;
+ unsigned long temp;
__asm__ __volatile__(
"1: " __LL "%0, %1 # test_and_clear_bit \n"
@@ -346,12 +341,10 @@ static inline int test_and_clear_bit(unsigned long nr,
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "ri" (bit), "m" (*m)
: "memory");
-
- return res;
#endif
} else if (cpu_has_llsc) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
- unsigned long temp, res;
+ unsigned long temp;
__asm__ __volatile__(
" .set push \n"
@@ -371,25 +364,22 @@ static inline int test_and_clear_bit(unsigned long nr,
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << bit), "m" (*m)
: "memory");
-
- return res != 0;
} else {
volatile unsigned long *a = addr;
unsigned long mask;
- int retval;
unsigned long flags;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- retval = (mask & *a) != 0;
+ res = (mask & *a);
*a &= ~mask;
raw_local_irq_restore(flags);
-
- return retval;
}
smp_mb();
+
+ return res != 0;
}
/*
@@ -404,10 +394,11 @@ static inline int test_and_change_bit(unsigned long nr,
volatile unsigned long *addr)
{
unsigned short bit = nr & SZLONG_MASK;
+ unsigned long res;
if (cpu_has_llsc && R10000_LLSC_WAR) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
- unsigned long temp, res;
+ unsigned long temp;
__asm__ __volatile__(
" .set mips3 \n"
@@ -420,11 +411,9 @@ static inline int test_and_change_bit(unsigned long nr,
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << bit), "m" (*m)
: "memory");
-
- return res != 0;
} else if (cpu_has_llsc) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
- unsigned long temp, res;
+ unsigned long temp;
__asm__ __volatile__(
" .set push \n"
@@ -443,24 +432,22 @@ static inline int test_and_change_bit(unsigned long nr,
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << bit), "m" (*m)
: "memory");
-
- return res != 0;
} else {
volatile unsigned long *a = addr;
- unsigned long mask, retval;
+ unsigned long mask;
unsigned long flags;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- retval = (mask & *a) != 0;
+ res = (mask & *a);
*a ^= mask;
raw_local_irq_restore(flags);
-
- return retval;
}
smp_mb();
+
+ return res != 0;
}
#include <asm-generic/bitops/non-atomic.h>
next prev parent reply other threads:[~2007-06-07 12:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-07 7:53 smp_mb() in asm-mips/bitops.h Atsushi Nemoto
2007-06-07 12:23 ` Ralf Baechle [this message]
2007-06-07 14:41 ` Atsushi Nemoto
2007-06-13 15:56 ` Atsushi Nemoto
2007-06-13 18:45 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070607122344.GD26047@linux-mips.org \
--to=ralf@linux-mips.org \
--cc=anemo@mba.ocn.ne.jp \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.