From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH] ide: convert ide_find_best_mode() users to use ide_max_dma_mode()
Date: Sat, 9 Jun 2007 22:10:51 +0200 [thread overview]
Message-ID: <200706092210.52291.bzolnier@gmail.com> (raw)
ide-timing.h:
* remove handling of DMA modes from ide_find_best_mode() and rename it to
ide_find_best_pio_mode()
* drop no longer needed "map" argument from ide_find_best_pio_mode()
and delete needless ->id check
* remove no longer needed XFER_SWDMA and XFER_UDMA* defines
au1xxx-ide.c:
* use ide_max_dma_mode() instead of ide_find_best_mode()
* remove needless CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA #ifdef
amd74xx.c:
* store UDMA masks in amd_ide_chip[] and while at it make "base" field
to be u8 instead of unsigned long
* convert the driver to use UDMA masks from amd_ide_chip[]
* use ide_max_dma_mode() and ide_find_best_pio_mode() instead
of ide_find_best_mode()
* delete stale comment from amd74xx_ide_dma_check()
* remove no longer needed AMD_UDMA* defines
via82cxxx.c:
* remove unused DISPLAY_VIA_TIMINGS define
* store UDMA masks in via_isa_bridges[] and while at it make "flags" field
to be u8 instead of u16
* convert the driver to use UDMA masks from via_isa_bridges[]
* use ide_max_dma_mode() and ide_find_best_pio_mode() instead
of ide_find_best_mode()
* remove no longer needed VIA_UDMA* defines
pmac.c:
* use ide_max_dma_mode() instead of ide_find_best_mode()
There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-timing.h | 56 -----------------
drivers/ide/mips/au1xxx-ide.c | 7 --
drivers/ide/pci/amd74xx.c | 118 +++++++++++++++++--------------------
drivers/ide/pci/via82cxxx.c | 132 +++++++++++++++++++-----------------------
drivers/ide/ppc/pmac.c | 25 +------
5 files changed, 123 insertions(+), 215 deletions(-)
Index: b/drivers/ide/ide-timing.h
===================================================================
--- a/drivers/ide/ide-timing.h
+++ b/drivers/ide/ide-timing.h
@@ -102,66 +102,16 @@ static struct ide_timing ide_timing[] =
#define EZ(v,unit) ((v)?ENOUGH(v,unit):0)
#define XFER_MODE 0xf0
-#define XFER_UDMA_133 0x48
-#define XFER_UDMA_100 0x44
-#define XFER_UDMA_66 0x42
-#define XFER_UDMA 0x40
#define XFER_MWDMA 0x20
-#define XFER_SWDMA 0x10
#define XFER_EPIO 0x01
#define XFER_PIO 0x00
-static short ide_find_best_mode(ide_drive_t *drive, int map)
+static short ide_find_best_pio_mode(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
short best = 0;
- if (!id)
- return XFER_PIO_SLOW;
-
- if ((map & XFER_UDMA) && (id->field_valid & 4)) { /* Want UDMA and UDMA bitmap valid */
-
- if ((map & XFER_UDMA_133) == XFER_UDMA_133)
- if ((best = (id->dma_ultra & 0x0040) ? XFER_UDMA_6 : 0)) return best;
-
- if ((map & XFER_UDMA_100) == XFER_UDMA_100)
- if ((best = (id->dma_ultra & 0x0020) ? XFER_UDMA_5 : 0)) return best;
-
- if ((map & XFER_UDMA_66) == XFER_UDMA_66)
- if ((best = (id->dma_ultra & 0x0010) ? XFER_UDMA_4 :
- (id->dma_ultra & 0x0008) ? XFER_UDMA_3 : 0)) return best;
-
- if ((best = (id->dma_ultra & 0x0004) ? XFER_UDMA_2 :
- (id->dma_ultra & 0x0002) ? XFER_UDMA_1 :
- (id->dma_ultra & 0x0001) ? XFER_UDMA_0 : 0)) return best;
- }
-
- if ((map & XFER_MWDMA) && (id->field_valid & 2)) { /* Want MWDMA and drive has EIDE fields */
-
- if ((best = (id->dma_mword & 0x0004) ? XFER_MW_DMA_2 :
- (id->dma_mword & 0x0002) ? XFER_MW_DMA_1 :
- (id->dma_mword & 0x0001) ? XFER_MW_DMA_0 : 0)) return best;
- }
-
- if (map & XFER_SWDMA) { /* Want SWDMA */
-
- if (id->field_valid & 2) { /* EIDE SWDMA */
-
- if ((best = (id->dma_1word & 0x0004) ? XFER_SW_DMA_2 :
- (id->dma_1word & 0x0002) ? XFER_SW_DMA_1 :
- (id->dma_1word & 0x0001) ? XFER_SW_DMA_0 : 0)) return best;
- }
-
- if (id->capability & 1) { /* Pre-EIDE style SWDMA */
-
- if ((best = (id->tDMA == 2) ? XFER_SW_DMA_2 :
- (id->tDMA == 1) ? XFER_SW_DMA_1 :
- (id->tDMA == 0) ? XFER_SW_DMA_0 : 0)) return best;
- }
- }
-
-
- if ((map & XFER_EPIO) && (id->field_valid & 2)) { /* EIDE PIO modes */
+ if (id->field_valid & 2) { /* EIDE PIO modes */
if ((best = (drive->id->eide_pio_modes & 4) ? XFER_PIO_5 :
(drive->id->eide_pio_modes & 2) ? XFER_PIO_4 :
@@ -262,7 +212,7 @@ static int ide_timing_compute(ide_drive_
*/
if ((speed & XFER_MODE) != XFER_PIO) {
- ide_timing_compute(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO), &p, T, UT);
+ ide_timing_compute(drive, ide_find_best_pio_mode(drive), &p, T, UT);
ide_timing_merge(&p, t, t, IDE_TIMING_ALL);
}
Index: b/drivers/ide/mips/au1xxx-ide.c
===================================================================
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -381,9 +381,7 @@ static int auide_dma_setup(ide_drive_t *
static int auide_dma_check(ide_drive_t *drive)
{
- u8 speed;
-
-#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ u8 speed = ide_max_dma_mode(drive);
if( dbdma_init_done == 0 ){
auide_hwif.white_list = ide_in_drive_list(drive->id,
@@ -394,7 +392,6 @@ static int auide_dma_check(ide_drive_t *
auide_ddma_init(&auide_hwif);
dbdma_init_done = 1;
}
-#endif
/* Is the drive in our DMA black list? */
@@ -409,8 +406,6 @@ static int auide_dma_check(ide_drive_t *
else
drive->using_dma = 1;
- speed = ide_find_best_mode(drive, XFER_PIO | XFER_MWDMA);
-
if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
return 0;
Index: b/drivers/ide/pci/amd74xx.c
===================================================================
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -1,10 +1,11 @@
/*
- * Version 2.15
+ * Version 2.20
*
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
* IDE driver for Linux.
*
* Copyright (c) 2000-2002 Vojtech Pavlik
+ * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
*
* Based on the work of:
* Andre Hedrick
@@ -37,11 +38,6 @@
#define AMD_ADDRESS_SETUP (0x0c + amd_config->base)
#define AMD_UDMA_TIMING (0x10 + amd_config->base)
-#define AMD_UDMA 0x07
-#define AMD_UDMA_33 0x01
-#define AMD_UDMA_66 0x02
-#define AMD_UDMA_100 0x03
-#define AMD_UDMA_133 0x04
#define AMD_CHECK_SWDMA 0x08
#define AMD_BAD_SWDMA 0x10
#define AMD_BAD_FIFO 0x20
@@ -53,32 +49,33 @@
static struct amd_ide_chip {
unsigned short id;
- unsigned long base;
- unsigned char flags;
+ u8 base;
+ u8 udma_mask;
+ u8 flags;
} amd_ide_chips[] = {
- { PCI_DEVICE_ID_AMD_COBRA_7401, 0x40, AMD_UDMA_33 | AMD_BAD_SWDMA },
- { PCI_DEVICE_ID_AMD_VIPER_7409, 0x40, AMD_UDMA_66 | AMD_CHECK_SWDMA },
- { PCI_DEVICE_ID_AMD_VIPER_7411, 0x40, AMD_UDMA_100 | AMD_BAD_FIFO },
- { PCI_DEVICE_ID_AMD_OPUS_7441, 0x40, AMD_UDMA_100 },
- { PCI_DEVICE_ID_AMD_8111_IDE, 0x40, AMD_UDMA_133 | AMD_CHECK_SERENADE },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x50, AMD_UDMA_100 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, 0x50, AMD_UDMA_133 },
- { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, AMD_UDMA_100 },
+ { PCI_DEVICE_ID_AMD_COBRA_7401, 0x40, ATA_UDMA2, AMD_BAD_SWDMA },
+ { PCI_DEVICE_ID_AMD_VIPER_7409, 0x40, ATA_UDMA4, AMD_CHECK_SWDMA },
+ { PCI_DEVICE_ID_AMD_VIPER_7411, 0x40, ATA_UDMA5, AMD_BAD_FIFO },
+ { PCI_DEVICE_ID_AMD_OPUS_7441, 0x40, ATA_UDMA5, },
+ { PCI_DEVICE_ID_AMD_8111_IDE, 0x40, ATA_UDMA6, AMD_CHECK_SERENADE },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x50, ATA_UDMA5, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, 0x50, ATA_UDMA6, },
+ { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, ATA_UDMA5, },
{ 0 }
};
@@ -87,7 +84,7 @@ static ide_pci_device_t *amd_chipset;
static unsigned int amd_80w;
static unsigned int amd_clock;
-static char *amd_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" };
+static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
/*
@@ -128,7 +125,7 @@ static int amd74xx_get_info(char *buffer
pci_read_config_byte(dev, PCI_REVISION_ID, &t);
amd_print("Revision: IDE %#x", t);
- amd_print("Highest DMA rate: %s", amd_dma[amd_config->flags & AMD_UDMA]);
+ amd_print("Highest DMA rate: UDMA%s", amd_dma[fls(amd_config->udma_mask) - 1]);
amd_print("BM-DMA base: %#lx", amd_base);
amd_print("PCI clock: %d.%dMHz", amd_clock / 1000, amd_clock / 100 % 10);
@@ -221,12 +218,12 @@ static void amd_set_speed(struct pci_dev
pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn),
((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
- switch (amd_config->flags & AMD_UDMA) {
- case AMD_UDMA_33: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
- case AMD_UDMA_66: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
- case AMD_UDMA_100: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
- case AMD_UDMA_133: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break;
- default: return;
+ switch (amd_config->udma_mask) {
+ case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
+ case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
+ case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
+ case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break;
+ default: return;
}
pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t);
@@ -250,7 +247,7 @@ static int amd_set_drive(ide_drive_t *dr
drive->dn >> 1, drive->dn & 1);
T = 1000000000 / amd_clock;
- UT = T / min_t(int, max_t(int, amd_config->flags & AMD_UDMA, 1), 2);
+ UT = (amd_config->udma_mask == ATA_UDMA2) ? T : (T / 2);
ide_timing_compute(drive, speed, &t, T, UT);
@@ -279,29 +276,19 @@ static int amd_set_drive(ide_drive_t *dr
static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio)
{
if (pio == 255) {
- amd_set_drive(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO));
+ amd_set_drive(drive, ide_find_best_pio_mode(drive));
return;
}
amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5));
}
-/*
- * amd74xx_dmaproc() is a callback from upper layers that can do
- * a lot, but we use it for DMA/PIO tuning only, delegating everything
- * else to the default ide_dmaproc().
- */
-
static int amd74xx_ide_dma_check(ide_drive_t *drive)
{
- int w80 = HWIF(drive)->udma_four;
+ u8 speed = ide_max_dma_mode(drive);
- u8 speed = ide_find_best_mode(drive,
- XFER_PIO | XFER_EPIO | XFER_MWDMA | XFER_UDMA |
- ((amd_config->flags & AMD_BAD_SWDMA) ? 0 : XFER_SWDMA) |
- (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_66 ? XFER_UDMA_66 : 0) |
- (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_100 ? XFER_UDMA_100 : 0) |
- (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_133 ? XFER_UDMA_133 : 0));
+ if (speed == 0)
+ speed = ide_find_best_pio_mode(drive);
amd_set_drive(drive, speed);
@@ -336,10 +323,10 @@ static unsigned int __devinit init_chips
* Check 80-wire cable presence.
*/
- switch (amd_config->flags & AMD_UDMA) {
+ switch (amd_config->udma_mask) {
- case AMD_UDMA_133:
- case AMD_UDMA_100:
+ case ATA_UDMA6:
+ case ATA_UDMA5:
pci_read_config_byte(dev, AMD_CABLE_DETECT, &t);
pci_read_config_dword(dev, AMD_UDMA_TIMING, &u);
amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
@@ -351,7 +338,7 @@ static unsigned int __devinit init_chips
}
break;
- case AMD_UDMA_66:
+ case ATA_UDMA4:
/* no host side cable detection */
amd_80w = 0x03;
break;
@@ -372,7 +359,7 @@ static unsigned int __devinit init_chips
if ((amd_config->flags & AMD_CHECK_SERENADE) &&
dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
- amd_config->flags = AMD_UDMA_100;
+ amd_config->udma_mask = ATA_UDMA5;
/*
* Determine the system bus clock.
@@ -397,8 +384,9 @@ static unsigned int __devinit init_chips
*/
pci_read_config_byte(dev, PCI_REVISION_ID, &t);
- printk(KERN_INFO "%s: %s (rev %02x) %s controller\n",
- amd_chipset->name, pci_name(dev), t, amd_dma[amd_config->flags & AMD_UDMA]);
+ printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
+ amd_chipset->name, pci_name(dev), t,
+ amd_dma[fls(amd_config->udma_mask) - 1]);
/*
* Register /proc/ide/amd74xx entry
@@ -439,9 +427,11 @@ static void __devinit init_hwif_amd74xx(
return;
hwif->atapi_dma = 1;
- hwif->ultra_mask = 0x7f;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x07;
+
+ hwif->ultra_mask = amd_config->udma_mask;
+ hwif->mwdma_mask = 0x07;
+ if ((amd_config->flags & AMD_BAD_SWDMA) == 0)
+ hwif->swdma_mask = 0x07;
if (!hwif->udma_four)
hwif->udma_four = (amd_80w >> hwif->channel) & 1;
Index: b/drivers/ide/pci/via82cxxx.c
===================================================================
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -1,6 +1,6 @@
/*
*
- * Version 3.38
+ * Version 3.40
*
* VIA IDE driver for Linux. Supported southbridges:
*
@@ -9,6 +9,7 @@
* vt8235, vt8237, vt8237a
*
* Copyright (c) 2000-2002 Vojtech Pavlik
+ * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
*
* Based on the work of:
* Michel Aubry
@@ -41,8 +42,6 @@
#include "ide-timing.h"
-#define DISPLAY_VIA_TIMINGS
-
#define VIA_IDE_ENABLE 0x40
#define VIA_IDE_CONFIG 0x41
#define VIA_FIFO_CONFIG 0x43
@@ -54,18 +53,12 @@
#define VIA_ADDRESS_SETUP 0x4c
#define VIA_UDMA_TIMING 0x50
-#define VIA_UDMA 0x007
-#define VIA_UDMA_NONE 0x000
-#define VIA_UDMA_33 0x001
-#define VIA_UDMA_66 0x002
-#define VIA_UDMA_100 0x003
-#define VIA_UDMA_133 0x004
-#define VIA_BAD_PREQ 0x010 /* Crashes if PREQ# till DDACK# set */
-#define VIA_BAD_CLK66 0x020 /* 66 MHz clock doesn't work correctly */
-#define VIA_SET_FIFO 0x040 /* Needs to have FIFO split set */
-#define VIA_NO_UNMASK 0x080 /* Doesn't work with IRQ unmasking on */
-#define VIA_BAD_ID 0x100 /* Has wrong vendor ID (0x1107) */
-#define VIA_BAD_AST 0x200 /* Don't touch Address Setup Timing */
+#define VIA_BAD_PREQ 0x01 /* Crashes if PREQ# till DDACK# set */
+#define VIA_BAD_CLK66 0x02 /* 66 MHz clock doesn't work correctly */
+#define VIA_SET_FIFO 0x04 /* Needs to have FIFO split set */
+#define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */
+#define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */
+#define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */
/*
* VIA SouthBridge chips.
@@ -76,36 +69,37 @@ static struct via_isa_bridge {
u16 id;
u8 rev_min;
u8 rev_max;
- u16 flags;
+ u8 udma_mask;
+ u8 flags;
} via_isa_bridges[] = {
- { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 },
- { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 },
- { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 },
- { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 },
- { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 },
- { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
- { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 },
- { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO },
- { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO },
- { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
- { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
- { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+ { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, },
+ { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, },
+ { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, },
+ { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, },
+ { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, },
+ { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
+ { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, },
+ { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
+ { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
+ { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO },
+ { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
+ { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
{ NULL }
};
static unsigned int via_clock;
-static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" };
+static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
struct via82cxxx_dev
{
@@ -140,12 +134,12 @@ static void via_set_speed(ide_hwif_t *hw
pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
- switch (vdev->via_config->flags & VIA_UDMA) {
- case VIA_UDMA_33: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
- case VIA_UDMA_66: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break;
- case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
- case VIA_UDMA_133: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
- default: return;
+ switch (vdev->via_config->udma_mask) {
+ case ATA_UDMA2: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
+ case ATA_UDMA4: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break;
+ case ATA_UDMA5: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
+ case ATA_UDMA6: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
+ default: return;
}
pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t);
@@ -173,12 +167,12 @@ static int via_set_drive(ide_drive_t *dr
T = 1000000000 / via_clock;
- switch (vdev->via_config->flags & VIA_UDMA) {
- case VIA_UDMA_33: UT = T; break;
- case VIA_UDMA_66: UT = T/2; break;
- case VIA_UDMA_100: UT = T/3; break;
- case VIA_UDMA_133: UT = T/4; break;
- default: UT = T;
+ switch (vdev->via_config->udma_mask) {
+ case ATA_UDMA2: UT = T; break;
+ case ATA_UDMA4: UT = T/2; break;
+ case ATA_UDMA5: UT = T/3; break;
+ case ATA_UDMA6: UT = T/4; break;
+ default: UT = T;
}
ide_timing_compute(drive, speed, &t, T, UT);
@@ -208,8 +202,7 @@ static int via_set_drive(ide_drive_t *dr
static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
{
if (pio == 255) {
- via_set_drive(drive,
- ide_find_best_mode(drive, XFER_PIO | XFER_EPIO));
+ via_set_drive(drive, ide_find_best_pio_mode(drive));
return;
}
@@ -226,16 +219,10 @@ static void via82cxxx_tune_drive(ide_dri
static int via82cxxx_ide_dma_check (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev);
- u16 w80 = hwif->udma_four;
+ u8 speed = ide_max_dma_mode(drive);
- u16 speed = ide_find_best_mode(drive,
- XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
- (vdev->via_config->flags & VIA_UDMA ? XFER_UDMA : 0) |
- (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) |
- (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) |
- (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0));
+ if (speed == 0)
+ speed = ide_find_best_pio_mode(drive);
via_set_drive(drive, speed);
@@ -272,8 +259,8 @@ static void __devinit via_cable_detect(s
{
int i;
- switch (vdev->via_config->flags & VIA_UDMA) {
- case VIA_UDMA_66:
+ switch (vdev->via_config->udma_mask) {
+ case ATA_UDMA4:
for (i = 24; i >= 0; i -= 8)
if (((u >> (i & 16)) & 8) &&
((u >> i) & 0x20) &&
@@ -286,7 +273,7 @@ static void __devinit via_cable_detect(s
}
break;
- case VIA_UDMA_100:
+ case ATA_UDMA5:
for (i = 24; i >= 0; i -= 8)
if (((u >> i) & 0x10) ||
(((u >> i) & 0x20) &&
@@ -298,7 +285,7 @@ static void __devinit via_cable_detect(s
}
break;
- case VIA_UDMA_133:
+ case ATA_UDMA6:
for (i = 24; i >= 0; i -= 8)
if (((u >> i) & 0x10) ||
(((u >> i) & 0x20) &&
@@ -353,7 +340,7 @@ static unsigned int __devinit init_chips
via_cable_detect(vdev, u);
- if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) {
+ if (via_config->udma_mask == ATA_UDMA4) {
/* Enable Clk66 */
pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
} else if (via_config->flags & VIA_BAD_CLK66) {
@@ -416,10 +403,12 @@ static unsigned int __devinit init_chips
*/
pci_read_config_byte(isa, PCI_REVISION_ID, &t);
- printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %s "
+ printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s "
"controller on pci%s\n",
via_config->name, t,
- via_dma[via_config->flags & VIA_UDMA],
+ via_config->udma_mask ? "U" : "MW",
+ via_dma[via_config->udma_mask ?
+ (fls(via_config->udma_mask) - 1) : 0],
pci_name(dev));
pci_dev_put(isa);
@@ -454,7 +443,8 @@ static void __devinit init_hwif_via82cxx
return;
hwif->atapi_dma = 1;
- hwif->ultra_mask = 0x7f;
+
+ hwif->ultra_mask = vdev->via_config->udma_mask;
hwif->mwdma_mask = 0x07;
hwif->swdma_mask = 0x07;
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1821,28 +1821,11 @@ pmac_ide_dma_check(ide_drive_t *drive)
enable = 0;
if (enable) {
- short mode;
-
- map = XFER_MWDMA;
- if (pmif->kind == controller_kl_ata4
- || pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6
- || pmif->kind == controller_sh_ata6) {
- map |= XFER_UDMA;
- if (pmif->cable_80) {
- map |= XFER_UDMA_66;
- if (pmif->kind == controller_un_ata6 ||
- pmif->kind == controller_k2_ata6 ||
- pmif->kind == controller_sh_ata6)
- map |= XFER_UDMA_100;
- if (pmif->kind == controller_sh_ata6)
- map |= XFER_UDMA_133;
- }
- }
- mode = ide_find_best_mode(drive, map);
- if (mode & XFER_UDMA)
+ u8 mode = ide_max_dma_mode(drive);
+
+ if (mode >= XFER_UDMA_0)
drive->using_dma = pmac_ide_udma_enable(drive, mode);
- else if (mode & XFER_MWDMA)
+ else if (mode >= XFER_MW_DMA_0)
drive->using_dma = pmac_ide_mdma_enable(drive, mode);
hwif->OUTB(0, IDE_CONTROL_REG);
/* Apply settings to controller */
next reply other threads:[~2007-06-09 19:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-09 20:10 Bartlomiej Zolnierkiewicz [this message]
2007-06-12 13:30 ` [PATCH] ide: convert ide_find_best_mode() users to use ide_max_dma_mode() Sergei Shtylyov
2007-06-15 23:14 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200706092210.52291.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.