From: andy@warmcat.com
To: linux-wireless@vger.kernel.org
Cc: Daniel Drake <dsd@gentoo.org>,
Ulrich Kunitz <kune@deine-taler.de>,
Andy Green <andy@warmcat.com>
Subject: [PATCH 1/2] zd1211rw-mac80211: return hardware specific tx rate code for rx status
Date: Mon, 11 Jun 2007 11:38:29 +0100 [thread overview]
Message-ID: <20070611103914.481787013@warmcat.com> (raw)
In-Reply-To: 20070611103828.961999956@warmcat.com
zd1211rw-mac80211 uses different hardware-specific codings to talk about
rates when doing transmit and receive. Because mac80211 looks up the rx
rate against the rates table used for selecting hardware-specific coding for
tx, the rate returned in the rx_status struct needs to be adjusted to use the
coding used to hardware-specific tx rates. This patch performs this adjustment.
Without this patch the radiotap-based monitor stuff reports a "0.0Mbps" rate for
all packets from this driver.
CC: Daniel Drake <dsd@gentoo.org>
CC: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Andy Green <andy@warmcat.com>
---
drivers/net/wireless/mac80211/zd1211rw/zd_chip.c | 22 ++++++++++++++++++++++
drivers/net/wireless/mac80211/zd1211rw/zd_chip.h | 2 ++
drivers/net/wireless/mac80211/zd1211rw/zd_mac.c | 2 +-
3 files changed, 25 insertions(+), 1 deletion(-)
Index: wireless-dev/drivers/net/wireless/mac80211/zd1211rw/zd_chip.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/mac80211/zd1211rw/zd_chip.c
+++ wireless-dev/drivers/net/wireless/mac80211/zd1211rw/zd_chip.c
@@ -1569,6 +1569,28 @@ u16 zd_rx_rate(const void *rx_frame, con
return rate;
}
+int zd_rx_rate_using_tx_format(const void *rx_frame,
+ const struct rx_status *status)
+{
+ if (status->frame_status & ZD_RX_OFDM) {
+ return ZD_CS_OFDM | (zd_ofdm_plcp_header_rate(rx_frame) & 0xf);
+ }
+
+ switch (zd_cck_plcp_header_rate(rx_frame)) {
+ case ZD_CCK_SIGNAL_1M:
+ return ZD_CS_CCK_RATE_1M;
+ case ZD_CCK_SIGNAL_2M:
+ return ZD_CS_CCK_RATE_2M;
+ case ZD_CCK_SIGNAL_5M5:
+ return ZD_CS_CCK_RATE_5_5M;
+ case ZD_CCK_SIGNAL_11M:
+ return ZD_CS_CCK_RATE_11M;
+ default:
+ return 0;
+ }
+
+}
+
int zd_chip_switch_radio_on(struct zd_chip *chip)
{
int r;
Index: wireless-dev/drivers/net/wireless/mac80211/zd1211rw/zd_chip.h
===================================================================
--- wireless-dev.orig/drivers/net/wireless/mac80211/zd1211rw/zd_chip.h
+++ wireless-dev/drivers/net/wireless/mac80211/zd1211rw/zd_chip.h
@@ -877,6 +877,8 @@ u8 zd_rx_qual_percent(const void *rx_fra
u8 zd_rx_strength_percent(u8 rssi);
u16 zd_rx_rate(const void *rx_frame, const struct rx_status *status);
+int zd_rx_rate_using_tx_format(const void *rx_frame,
+ const struct rx_status *status);
struct zd_mc_hash {
u32 low;
Index: wireless-dev/drivers/net/wireless/mac80211/zd1211rw/zd_mac.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/mac80211/zd1211rw/zd_mac.c
+++ wireless-dev/drivers/net/wireless/mac80211/zd1211rw/zd_mac.c
@@ -642,7 +642,7 @@ static int fill_rx_stats(struct ieee8021
stats->signal = zd_rx_qual_percent(buffer,
length - sizeof(struct rx_status),
status);
- stats->rate = zd_rx_rate(buffer, status);
+ stats->rate = zd_rx_rate_using_tx_format(buffer, status);
return 0;
}
--
next prev parent reply other threads:[~2007-06-11 10:39 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-11 10:38 [PATCH 0/2] Small driver fixes andy
2007-06-11 10:38 ` andy [this message]
2007-07-19 19:10 ` [PATCH 1/2] zd1211rw-mac80211: return hardware specific tx rate code for rx status John W. Linville
2007-07-19 21:19 ` Ulrich Kunitz
2007-06-11 10:38 ` [PATCH 2/2] bcm43xx-mac80211: Fix reported rx frequency and channel andy
2007-06-11 11:26 ` Johannes Berg
2007-06-11 11:45 ` Johannes Berg
2007-07-19 19:10 ` John W. Linville
2007-07-19 19:39 ` Michael Buesch
2007-07-20 6:05 ` Andy Green
2007-07-20 7:37 ` Johannes Berg
2007-07-20 13:31 ` John W. Linville
2007-07-20 14:36 ` Larry Finger
2007-07-20 14:47 ` Andy Green
2007-07-20 16:58 ` Larry Finger
2007-07-20 17:36 ` Michael Buesch
2007-07-20 17:48 ` Andy Green
2007-07-20 17:50 ` Michael Buesch
2007-07-20 20:40 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070611103914.481787013@warmcat.com \
--to=andy@warmcat.com \
--cc=dsd@gentoo.org \
--cc=kune@deine-taler.de \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.