From: Ondrej Zary <linux@rainbow-software.org>
To: daniel.ritz@gmx.ch
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] Fix broken ifdefs in usbtouchscreen
Date: Mon, 11 Jun 2007 17:09:50 +0200 [thread overview]
Message-ID: <200706111709.50605.linux@rainbow-software.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 217 bytes --]
Hello,
this patch fixes ifdefs in usbtouchscreen that got broken by Kconfig changes,
resulting in non-working module with empty device table.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
--
Ondrej Zary
[-- Attachment #2: usbtouchscreen-ifdef.patch --]
[-- Type: text/x-diff, Size: 5261 bytes --]
--- linux-2.6.22-rc4-orig/drivers/input/touchscreen/usbtouchscreen.c 2007-06-05 02:57:25.000000000 +0200
+++ linux-2.6.22-rc4/drivers/input/touchscreen/usbtouchscreen.c 2007-06-11 14:07:40.000000000 +0200
@@ -91,7 +91,7 @@
};
-#if defined(CONFIG_USB_TOUCHSCREEN_EGALAX) || defined(CONFIG_USB_TOUCHSCREEN_ETURBO)
+#if defined(CONFIG_TOUCHSCREEN_USB_EGALAX) || defined(CONFIG_TOUCHSCREEN_USB_ETURBO)
#define MULTI_PACKET
#endif
@@ -113,7 +113,7 @@
};
static struct usb_device_id usbtouch_devices[] = {
-#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
@@ -123,30 +123,30 @@
{USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
{USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},
{USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},
{USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},
{USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_3M
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
{USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
{USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
{USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
{USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
#endif
@@ -158,7 +158,7 @@
* eGalax part
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
#define EGALAX_PKT_TYPE_MASK 0xFE
#define EGALAX_PKT_TYPE_REPT 0x80
@@ -197,7 +197,7 @@
/*****************************************************************************
* PanJit Part
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
@@ -212,7 +212,7 @@
/*****************************************************************************
* 3M/Microtouch Part
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_3M
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
#define MTOUCHUSB_ASYNC_REPORT 1
#define MTOUCHUSB_RESET 7
@@ -262,7 +262,7 @@
/*****************************************************************************
* ITM Part
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
int touch;
@@ -296,7 +296,7 @@
/*****************************************************************************
* eTurboTouch part
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
unsigned int shift;
@@ -327,7 +327,7 @@
/*****************************************************************************
* Gunze part
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
@@ -348,7 +348,7 @@
* http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
* http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
/* supported data rates. currently using 130 */
#define TSC10_RATE_POINT 0x50
@@ -419,7 +419,7 @@
* the different device descriptors
*/
static struct usbtouch_device_info usbtouch_dev_info[] = {
-#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
[DEVTYPE_EGALAX] = {
.min_xc = 0x0,
.max_xc = 0x07ff,
@@ -433,7 +433,7 @@
},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
[DEVTYPE_PANJIT] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
@@ -444,7 +444,7 @@
},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_3M
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
[DEVTYPE_3M] = {
.min_xc = 0x0,
.max_xc = 0x4000,
@@ -456,7 +456,7 @@
},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
[DEVTYPE_ITM] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
@@ -468,7 +468,7 @@
},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
[DEVTYPE_ETURBO] = {
.min_xc = 0x0,
.max_xc = 0x07ff,
@@ -482,7 +482,7 @@
},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
[DEVTYPE_GUNZE] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
@@ -493,7 +493,7 @@
},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
[DEVTYPE_DMC_TSC10] = {
.min_xc = 0x0,
.max_xc = 0x03ff,
next reply other threads:[~2007-06-11 15:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-11 15:09 Ondrej Zary [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-06-11 16:41 Fwd: [PATCH] Fix broken ifdefs in usbtouchscreen Daniel Ritz
2007-06-11 16:53 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200706111709.50605.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=daniel.ritz@gmx.ch \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.