All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Wright <chrisw@sous-sol.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
	LKML <linux-kernel@vger.kernel.org>, Andi Kleen <ak@suse.de>,
	"Udo A. Steinberg" <us15@os.inf.tu-dresden.de>,
	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>,
	Dave Jones <davej@redhat.com>, Ingo Molnar <mingo@elte.hu>,
	Arjan van de Ven <arjan@infradead.org>,
	Stable Team <stable@kernel.org>, Len Brown <lenb@kernel.org>
Subject: Re: [stable] [PATCH] ACPI: Move timer broadcast and pmtimer access before C3 arbiter shutdown
Date: Mon, 11 Jun 2007 18:07:35 -0700	[thread overview]
Message-ID: <20070612010735.GL3723@sequoia.sous-sol.org> (raw)
In-Reply-To: <20070606183857.caa243d4.akpm@linux-foundation.org>

* Andrew Morton (akpm@linux-foundation.org) wrote:
> hm, this needs a bit of help to get it to work against Len's current tree.

Here's some help, compile tested only.  Udo/Thomas, was this found to
be root cause of a real bug?  I didn't want this to get lost if it's
still meant to be relevant for -stable.

thanks,
-chris
--

Subject: ACPI: Move timer broadcast and pmtimer access before C3 arbiter shutdown

From: Udo A. Steinberg <us15@os.inf.tu-dresden.de>

The chip set doc for IHC4 says:

1.In general, software should not attempt any non-posted accesses during
arbiter disable except to the ICH4's power management registers. This
implies that interrupt handlers for any unmasked hardware interrupts and
SMI/NMI should check ARB_DIS status before reading from ICH devices.

So it's not a good idea to access ICH devices after arbiter shut down. 

Signed-off-by: Udo A. Steinberg <us15@os.inf.tu-dresden.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[chrisw: rebase against Len's changes in -mm]
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

---

 drivers/acpi/processor_idle.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 2c6a3cb..15db3e8 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -978,6 +978,11 @@ static int acpi_idle_enter_c3(struct cpuidle_device *dev,
 		return 0;
 	}
 
+	/* Get start time (ticks) */
+	t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+	acpi_state_timer_broadcast(pr, cx, 1);
+	acpi_idle_do_entry(cx);
+
 	/* disable bus master */
 	if (pr->flags.bm_check) {
 		spin_lock(&c3_lock);
@@ -995,10 +1000,6 @@ static int acpi_idle_enter_c3(struct cpuidle_device *dev,
 		ACPI_FLUSH_CPU_CACHE();
 	}
 
-	/* Get start time (ticks) */
-	t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
-	acpi_state_timer_broadcast(pr, cx, 1);
-	acpi_idle_do_entry(cx);
 	t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
 
 	if (pr->flags.bm_check) {

  parent reply	other threads:[~2007-06-12  1:08 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-06-06  9:37 [PATCH] ACPI: Move timer broadcast and pmtimer access before C3 arbiter shutdown Thomas Gleixner
2007-06-06 21:02 ` [PATCH] ACPI: Move timer broadcast and pmtimer access before C3arbiter shutdown Pallipadi, Venkatesh
2007-06-07  1:38 ` [PATCH] ACPI: Move timer broadcast and pmtimer access before C3 arbiter shutdown Andrew Morton
2007-06-07  1:43   ` Pallipadi, Venkatesh
2007-06-12  1:07   ` Chris Wright [this message]
2007-06-12  8:26     ` [stable] " Thomas Gleixner
2007-06-12 12:54       ` [stable] [PATCH] ACPI: Move timer broadcast and pmtimer accessbefore " Pallipadi, Venkatesh
2007-06-12 16:58         ` Chris Wright

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070612010735.GL3723@sequoia.sous-sol.org \
    --to=chrisw@sous-sol.org \
    --cc=ak@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=arjan@infradead.org \
    --cc=davej@redhat.com \
    --cc=lenb@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=stable@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=us15@os.inf.tu-dresden.de \
    --cc=venkatesh.pallipadi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.