Re: Powerbook hard shutdown after boot if it's hot

[Michael Buesch <mb@bu3sch.de>]

On Saturday 16 June 2007 15:04:41 Michael Buesch wrote:
> On Saturday 16 June 2007 02:51:13 Benjamin Herrenschmidt wrote:
> > On Thu, 2007-06-14 at 17:39 +0200, Michael Buesch wrote:
> > > Hi,
> > > 
> > > I have a strange problem that my Powerbook shuts down hard
> > > right after boot, if the machine is hot.
> > > For example, if I compile a kernel and then want to reboot
> > > into it, it will shutdown the machine right after userspace
> > > is booted. Cooling down the machine will fix the issue.
> > > I first thought this might be a problem with the adt746x
> > > chip driver (thermostat). But this turns out to not be
> > > the case. I disabled the module (put return 0; early into
> > > the module_init function), but the problem still exists.
> > > I'm not sure how to debug this, as I don't see what's
> > > going on. I tried to boot with init=/bin/bash. It will
> > > boot into the shell but shutdown hard after 1 or 2 seconds.
> > > It seems like there is some timer hitting in right after
> > > userspace is up and running (some workqueue?). Strange is
> > > that it _only_ shuts down the machine when it's hot
> > > and it _only_ does this right after boot. If it survived
> > > the first few seconds after boot, it's rock-stable and
> > > it won't show any problems when getting hot (will drive
> > > the fans correctly, etc etc...)
> > > 
> > > Any idea how to debug this?
> > 
> > Not really, that's weird.. maybe trying to print the values in the adt
> > sensor to see how hot it is vs. the various thresholds set by the
> 
> The thresholds are the same as when the machine is cold:
> 81 80 87
> 
> I also tried to spinup the fans at full speed on boot (by setting
> the fan_speed variable in the adt driver to 255), but it kills
> the machine before the fans have the ability to spin up.
> 
> I also tried to move the 2000ms sleep in the adt monitor task down
> to the bottom of the task function, so it immediately runs the task
> once on boot. But that didn't help either.
> 
> I think this powerdown is not really related to the adt chip/driver.
> I think it's more likely some PMU issue and the PMU forces the machine
> down. How's the PMU involved into temperatures? Does it get
> the temperature values from the adt chip?
> 
> > firmware ? Maybe the PMU is trying to send us a "high temp" alert via a
> > PMU message we don't know how to parse and expcts us to reply in a given
> > amount of time (for example by slowing the CPU down).
> 
> Where in the kernel code are the PMU messages handled?
> 

Oh, and I completely forgot to say that this problem does
not exist when booting OSX. So if I try to boot linux and it
fails because of the issue and I immediately boot OSX it will succeed.

-- 
Greetings Michael.