From: Michal Schmidt <mschmidt@redhat.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, Dan Williams <dcbw@redhat.com>,
Matteo Croce <rootkit85@yahoo.it>
Subject: [PATCH 2/5] airo: delay some initialization until the netdev is up
Date: Fri, 29 Jun 2007 15:33:36 +0200 [thread overview]
Message-ID: <20070629133336.6658.46135.stgit@localhost.localdomain> (raw)
In-Reply-To: <20070629131841.6658.76381.stgit@localhost.localdomain>
airo's kernel thread and the IRQ handler are needed only when the interface
is up.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
---
drivers/net/wireless/airo.c | 80 ++++++++++++++++++++++++-------------------
1 files changed, 45 insertions(+), 35 deletions(-)
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 57da70b..37aa619 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -1926,28 +1926,55 @@ static int readStatsRid(struct airo_info*ai, StatsRid *sr, int rid, int lock) {
return rc;
}
+static void try_auto_wep(struct airo_info *ai)
+{
+ if (auto_wep && !(ai->flags & FLAG_RADIO_DOWN)) {
+ ai->expires = RUN_AT(3*HZ);
+ wake_up_interruptible(&ai->thr_wait);
+ }
+}
+
static int airo_open(struct net_device *dev) {
- struct airo_info *info = dev->priv;
+ struct airo_info *ai = dev->priv;
Resp rsp;
+ int rc = 0;
- if (test_bit(FLAG_FLASHING, &info->flags))
+ if (test_bit(FLAG_FLASHING, &ai->flags))
return -EIO;
/* Make sure the card is configured.
* Wireless Extensions may postpone config changes until the card
* is open (to pipeline changes and speed-up card setup). If
* those changes are not yet commited, do it now - Jean II */
- if (test_bit (FLAG_COMMIT, &info->flags)) {
- disable_MAC(info, 1);
- writeConfigRid(info, 1);
+ if (test_bit(FLAG_COMMIT, &ai->flags)) {
+ disable_MAC(ai, 1);
+ writeConfigRid(ai, 1);
}
- if (info->wifidev != dev) {
+ if (ai->wifidev != dev) {
+ clear_bit(JOB_DIE, &ai->jobs);
+ ai->airo_thread_task = kthread_run(airo_thread, dev, dev->name);
+ if (IS_ERR(ai->airo_thread_task))
+ return (int)PTR_ERR(ai->airo_thread_task);
+
+ rc = request_irq(dev->irq, airo_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (rc) {
+ airo_print_err(dev->name,
+ "register interrupt %d failed, rc %d",
+ dev->irq, rc);
+ set_bit(JOB_DIE, &ai->jobs);
+ kthread_stop(ai->airo_thread_task);
+ return rc;
+ }
+
/* Power on the MAC controller (which may have been disabled) */
- clear_bit(FLAG_RADIO_DOWN, &info->flags);
- enable_interrupts(info);
+ clear_bit(FLAG_RADIO_DOWN, &ai->flags);
+ enable_interrupts(ai);
+
+ try_auto_wep(ai);
}
- enable_MAC(info, &rsp, 1);
+ enable_MAC(ai, &rsp, 1);
netif_start_queue(dev);
return 0;
@@ -2392,6 +2419,11 @@ static int airo_close(struct net_device *dev) {
disable_MAC(ai, 1);
#endif
disable_interrupts( ai );
+
+ free_irq(dev->irq, dev);
+
+ set_bit(JOB_DIE, &ai->jobs);
+ kthread_stop(ai->airo_thread_task);
}
return 0;
}
@@ -2403,7 +2435,6 @@ void stop_airo_card( struct net_device *dev, int freeres )
set_bit(FLAG_RADIO_DOWN, &ai->flags);
disable_MAC(ai, 1);
disable_interrupts(ai);
- free_irq( dev->irq, dev );
takedown_proc_entry( dev, ai );
if (test_bit(FLAG_REGISTERED, &ai->flags)) {
unregister_netdev( dev );
@@ -2414,9 +2445,6 @@ void stop_airo_card( struct net_device *dev, int freeres )
}
clear_bit(FLAG_REGISTERED, &ai->flags);
}
- set_bit(JOB_DIE, &ai->jobs);
- kthread_stop(ai->airo_thread_task);
-
/*
* Clean out tx queue
*/
@@ -2821,14 +2849,11 @@ static struct net_device *_init_airo_card( unsigned short irq, int port,
ai->config.len = 0;
ai->pci = pci;
init_waitqueue_head (&ai->thr_wait);
- ai->airo_thread_task = kthread_run(airo_thread, dev, dev->name);
- if (IS_ERR(ai->airo_thread_task))
- goto err_out_free;
ai->tfm = NULL;
add_airo_dev(ai);
if (airo_networks_allocate (ai))
- goto err_out_thr;
+ goto err_out_free;
airo_networks_initialize (ai);
/* The Airo-specific entries in the device structure. */
@@ -2851,21 +2876,16 @@ static struct net_device *_init_airo_card( unsigned short irq, int port,
dev->base_addr = port;
SET_NETDEV_DEV(dev, dmdev);
+ SET_MODULE_OWNER(dev);
reset_card (dev, 1);
msleep(400);
- rc = request_irq( dev->irq, airo_interrupt, IRQF_SHARED, dev->name, dev );
- if (rc) {
- airo_print_err(dev->name, "register interrupt %d failed, rc %d",
- irq, rc);
- goto err_out_nets;
- }
if (!is_pcmcia) {
if (!request_region( dev->base_addr, 64, dev->name )) {
rc = -EBUSY;
airo_print_err(dev->name, "Couldn't request region");
- goto err_out_irq;
+ goto err_out_nets;
}
}
@@ -2921,8 +2941,6 @@ static struct net_device *_init_airo_card( unsigned short irq, int port,
if (setup_proc_entry(dev, dev->priv) < 0)
goto err_out_wifi;
- netif_start_queue(dev);
- SET_MODULE_OWNER(dev);
return dev;
err_out_wifi:
@@ -2940,14 +2958,9 @@ err_out_map:
err_out_res:
if (!is_pcmcia)
release_region( dev->base_addr, 64 );
-err_out_irq:
- free_irq(dev->irq, dev);
err_out_nets:
airo_networks_free(ai);
-err_out_thr:
del_airo_dev(ai);
- set_bit(JOB_DIE, &ai->jobs);
- kthread_stop(ai->airo_thread_task);
err_out_free:
free_netdev(dev);
return NULL;
@@ -3919,10 +3932,7 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock)
rc = readWepKeyRid(ai, &wkr, 0, lock);
} while(lastindex != wkr.kindex);
- if (auto_wep) {
- ai->expires = RUN_AT(3*HZ);
- wake_up_interruptible(&ai->thr_wait);
- }
+ try_auto_wep(ai);
return SUCCESS;
}
next prev parent reply other threads:[~2007-06-29 13:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-29 13:33 [PATCH 0/5] airo fixes (take 3) Michal Schmidt
2007-06-29 13:33 ` [PATCH 1/5] airo: disable the PCI device when unloading module Michal Schmidt
2007-06-29 13:33 ` Michal Schmidt [this message]
2007-06-29 13:33 ` [PATCH 3/5] airo: fix a race causing initialization failures Michal Schmidt
2007-06-29 13:33 ` [PATCH 4/5] airo: simpler calling convention for enable_MAC() Michal Schmidt
2007-06-29 13:33 ` [PATCH 5/5] airo: start with radio off Michal Schmidt
2007-06-29 19:27 ` [PATCH 0/5] airo fixes (take 3) Matteo Croce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070629133336.6658.46135.stgit@localhost.localdomain \
--to=mschmidt@redhat.com \
--cc=dcbw@redhat.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=rootkit85@yahoo.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.